Re: svwsata: lost/missing interrupt

To: tech-kern%netbsd.org@localhost
Subject: Re: svwsata: lost/missing interrupt
From: Edgar Fuß <ef%math.uni-bonn.de@localhost>
Date: Tue, 18 Feb 2025 12:35:41 +0100

So here's the complete diff of dmesg.boot between -8 and -10 on the same machine:

--- dmesg.boot-8	2025-02-18 12:25:55.008057571 +0100
+++ dmesg.boot-10	2025-02-18 12:05:24.731192304 +0100
@@ -1,56 +1,56 @@
-Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
-    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
-    2018, 2019, 2020, 2021, 2022, 2023
+Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
+    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
+    2024
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
-NetBSD 8.2_STABLE (MI-Server) #25: Mon Oct  9 14:52:42 CEST 2023
-	ef%peene.math.uni-bonn.de@localhost:/var/work/obj-8/sys/arch/amd64/compile/miserv
+NetBSD 10.1 (MI-Server) #8: Mon Feb 17 13:12:03 CET 2025
+	ef%peene.math.uni-bonn.de@localhost:/var/work/obj-10/sys/arch/amd64/compile/miserv
 total memory = 4095 MB
-avail memory = 3964 MB
+avail memory = 3943 MB
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
-running cgd selftest aes-xts-256 aes-xts-512 done
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
-To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
 mainbus0 (root)
 ACPI: RSDP 0x00000000000F7CB0 000024 (v02 ACPIAM)
 ACPI: XSDT 0x00000000F5FF0100 000044 (v01 A M I  OEMXSDT  02000829 MSFT 00000097)
 ACPI: FACP 0x00000000F5FF0290 0000F4 (v03 A M I  OEMFACP  02000829 MSFT 00000097)
-ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 96/64 (20170303/tbfadt-642)
+Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 96/64 (20221020/tbfadt-640)
 ACPI: DSDT 0x00000000F5FF0400 003018 (v01 0AAAA  0AAAA000 00000000 INTL 02002026)
 ACPI: FACS 0x00000000F5FFE000 000040
-ACPI: FACS 0x00000000F5FFE000 000040
 ACPI: APIC 0x00000000F5FF0390 000070 (v01 A M I  OEMAPIC  02000829 MSFT 00000097)
 ACPI: OEMB 0x00000000F5FFE040 000056 (v01 A M I  AMI_OEM  02000829 MSFT 00000097)
 ACPI: SSDT 0x00000000F5FF3420 000182 (v01 A M I  POWERNOW 00000001 AMD  00000001)
-ACPI: Executed 1 blocks of module-level executable AML code
 ACPI: 2 ACPI AML tables successfully acquired and loaded
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 16 pins
 ioapic1 at mainbus0 apid 3: pa 0xfec01000, version 0x11, 16 pins
 ioapic2 at mainbus0 apid 4: pa 0xfec02000, version 0x11, 16 pins
 cpu0 at mainbus0 apid 0
+cpu0: Use mfence to serialize rdtsc
 cpu0: Dual-Core AMD Opteron(tm) Processor 1210, id 0x40f32
-cpu0: package 0, core 0, smt 0
+cpu0: node 0, package 0, core 0, smt 0
+cpu0: searching errata for cpu revision 0x00040f32
 cpu1 at mainbus0 apid 1
 cpu1: Dual-Core AMD Opteron(tm) Processor 1210, id 0x40f32
-cpu1: package 0, core 1, smt 0
-acpi0 at mainbus0: Intel ACPICA 20170303
+cpu1: node 0, package 0, core 1, smt 0
+acpi0 at mainbus0: Intel ACPICA 20221020
 acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,02000829>, AslId <MSFT,00000097>
 acpi0: SCI interrupting at int 9
+acpi0: fixed power button present
+acpi0: fixed sleep button present
 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
 attimer0 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
 pckbc0 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
+spkr0 at pcppi0: PC Speaker
+wsbell at spkr0 not configured
 sysbeep0 at pcppi0
 com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
-com0: ns16550a, working fifo
+com0: ns16550a, 16-byte FIFO
 com1 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3 drq 0
-com1: ns16550a, working fifo
-SIOR (PNP0C02) at acpi0 not configured
-RMSC (PNP0C02) at acpi0 not configured
-OMSC (PNP0C02) at acpi0 not configured
+com1: ns16550a, 16-byte FIFO
 RMEM (PNP0C01) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
 pckbd0 at pckbc0 (kbd slot)
@@ -59,10 +59,10 @@
 attimer0: attached to pcppi0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
-ppb0 at pci0 dev 1 function 0: vendor 1166 product 0036 (rev. 0x00)
+ppb0 at pci0 dev 1 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
-ppb1 at pci1 dev 13 function 0: vendor 1166 product 0104 (rev. 0xc0)
+ppb1 at pci1 dev 13 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xc0)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 svwsata0 at pci1 dev 14 function 0: ServerWorks HT-1000 SATA Controller (rev. 0x00)
@@ -76,7 +76,7 @@
 atabus2 at svwsata0 channel 2
 svwsata0: secondary channel configured to compatibility mode
 atabus3 at svwsata0 channel 3
-piixpm0 at pci0 dev 2 function 0: vendor 1166 product 0205 (rev. 0x00)
+piixpm0 at pci0 dev 2 function 0: ServerWorks HT1000SB South Bridge (rev. 0x00)
 piixpm0: polling
 iic0 at piixpm0 port 0: I2C bus
 spdmem0 at iic0 addr 0x50
@@ -99,25 +99,28 @@
 rccide0: secondary channel configured to compatibility mode
 rccide0: secondary channel interrupting at ioapic0 pin 15
 atabus5 at rccide0 channel 1
-pcib0 at pci0 dev 2 function 2: vendor 1166 product 0234 (rev. 0x00)
-ohci0 at pci0 dev 3 function 0: vendor 1166 product 0223 (rev. 0x01)
+pcib0 at pci0 dev 2 function 2: ServerWorks HT1000 LPC (rev. 0x00)
+ohci0 at pci0 dev 3 function 0: ServerWorks HT1000 USB (rev. 0x01)
 ohci0: interrupting at ioapic0 pin 10
 ohci0: OHCI version 1.0, legacy support
 ohci0: autoconfiguration error: SMM does not respond, resetting
 usb0 at ohci0: USB revision 1.0
-ohci1 at pci0 dev 3 function 1: vendor 1166 product 0223 (rev. 0x01)
+ohci1 at pci0 dev 3 function 1: ServerWorks HT1000 USB (rev. 0x01)
 ohci1: interrupting at ioapic0 pin 10
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
-ehci0 at pci0 dev 3 function 2: vendor 1166 product 0223 (rev. 0x01)
+ehci0 at pci0 dev 3 function 2: ServerWorks HT1000 USB (rev. 0x01)
+ehci0: 32-bit DMA
 ehci0: interrupting at ioapic0 pin 10
 ehci0: EHCI version 1.0
 ehci0: 2 companion controllers, 2 ports each: ohci0 ohci1
+ehci0: Using DMA subregion for control data structures
 usb2 at ehci0: USB revision 2.0
 wm0 at pci0 dev 4 function 0, 64-bit DMA: Intel i82541GI 1000BASE-T Ethernet (rev. 0x05)
 wm0: interrupting at ioapic1 pin 8
 wm0: 32-bit 33MHz PCI bus
 wm0: 256 words (8 address bits) MicroWire EEPROM
+wm0: RX packet buffer size: 48KB
 wm0: Ethernet address 00:e0:81:b1:6f:50
 wm0: 0x220402<LOCK_EECD,IOH_VALID,ASF_FIRM,WOL>
 igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
@@ -126,17 +129,18 @@
 wm1: interrupting at ioapic1 pin 9
 wm1: 32-bit 33MHz PCI bus
 wm1: 64 words (6 address bits) MicroWire EEPROM
+wm1: RX packet buffer size: 48KB
 wm1: Ethernet address 00:e0:81:b1:6f:51
 wm1: 0x220402<LOCK_EECD,IOH_VALID,ASF_FIRM,WOL>
 igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
 igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
-vga0 at pci0 dev 6 function 0: vendor 18ca product 0020 (rev. 0x00)
+vga0 at pci0 dev 6 function 0: XGI Technology Volari Z7/Z9/Z9s (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
-pchb0 at pci0 dev 24 function 0: vendor 1022 product 1100 (rev. 0x00)
-pchb1 at pci0 dev 24 function 1: vendor 1022 product 1101 (rev. 0x00)
-pchb2 at pci0 dev 24 function 2: vendor 1022 product 1102 (rev. 0x00)
+pchb0 at pci0 dev 24 function 0: AMD K8 AMD64 HyperTransport Configuration (rev. 0x00)
+pchb1 at pci0 dev 24 function 1: AMD K8 AMD64 Address Map Configuration (rev. 0x00)
+pchb2 at pci0 dev 24 function 2: AMD K8 AMD64 DRAM Configuration (rev. 0x00)
 amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
 amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev JH-F2, socket AM2)
 isa0 at pcib0
@@ -146,15 +150,15 @@
 acpicpu0: P1: FFH, lat 100 us, pow 37991 mW, 1000 MHz
 acpicpu1 at cpu1: ACPI CPU
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
-IPsec: Initialized Security Association Processing.
-uhub0 at usb1: vendor 1166 (0x1166) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
+uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
-uhub1 at usb0: vendor 1166 (0x1166) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
+uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
-uhub2 at usb2: vendor 1166 (0x1166) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
+uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
 uhub2: 4 ports with 4 removable, self powered
-svwsata0 port 0: device present, speed: 1.5Gb/s
+IPsec: Initialized Security Association Processing.
 svwsata0 port 1: device present, speed: 1.5Gb/s
+svwsata0 port 0: device present, speed: 1.5Gb/s
 svwsata0 port 2: device present, speed: 1.5Gb/s
 svwsata0 port 3: device present, speed: 1.5Gb/s
 wd0 at atabus0 drive 0
@@ -162,23 +166,23 @@
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd0: 32-bit data port
-wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
-wd0(svwsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
+wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
+wd0(svwsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
 wd1 at atabus1 drive 0
 wd1: <CT250MX500SSD1>
 wd1: drive supports 1-sector PIO transfers, LBA48 addressing
-wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
+wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors (4096 bytes/physsect; first aligned sector: 8)
 wd1: 32-bit data port
-wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
-wd1(svwsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
+wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
+wd1(svwsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
 wd2 at atabus2 drive 0
 wd2: <WDC WD2502ABYS-01B7A0>
 wd2: drive supports 16-sector PIO transfers, LBA48 addressing
 wd2: 233 GB, 486459 cyl, 16 head, 63 sec, 512 bytes/sect x 490350672 sectors
 wd2: 32-bit data port
-wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
-wd2(svwsata0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
-atapibus0 at atabus3: 2 targets
+wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
+wd2(svwsata0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
+atapibus0 at atabus3: 1 targets
 cd0 at atapibus0 drive 0: <TSSTcorpDVD-ROM SH-D163B, , SB01> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
@@ -190,8 +194,14 @@
 boot device: raid0
 root on raid0a dumps on raid0b
 root file system type: ffs
-kern.module.path=/stand/amd64/8.2/modules
+kern.module.path=/stand/amd64/10.1/modules
+entropy: best effort
+arp_llinfo_output: source can't be determined: dst=131.220.132.161
+arp_llinfo_output: source can't be determined: dst=131.220.132.161
+arp_llinfo_output: source can't be determined: dst=131.220.132.161
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
+arp_llinfo_output: source can't be determined: dst=131.220.132.161
+arp_llinfo_output: source can't be determined: dst=131.220.132.161

Follow-Ups:
- Re: svwsata: lost/missing interrupt
  - From: Brian Buhrow
- Re: svwsata: lost/missing interrupt
  - From: Michael
- Re: svwsata: lost/missing interrupt
  - From: tlaronde

References:
- Re: svwsata: lost/missing interrupt
  - From: Edgar Fuß
- Re: svwsata: lost/missing interrupt
  - From: Brian Buhrow

Prev by Date: Re: [10.99.12] Panic (softints stuck)
Next by Date: Re: svwsata: lost/missing interrupt
Previous by Thread: Re: svwsata: lost/missing interrupt
Next by Thread: Re: svwsata: lost/missing interrupt
Indexes:

Home | Main Index | Thread Index | Old Index