tech-kern archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: NetBSD 10.0 BETA kernel testing: framebuffer
Hello,
Le Sun, Jan 22, 2023 at 04:59:19PM +0100, Martin Husemann a écrit :
> On Sun, Jan 22, 2023 at 02:56:47PM +0100, tlaronde%polynum.com@localhost wrote:
> > no data for est. mode 640x480x67
>
> [..]
>
> > I have not updated the book blocks. Is the 10.0 kernel expecting to have
> > hints about the modes from the bootloader i.e. a new install would
> > have updated the boot blocks and I would not have seen this?
>
> Boot blocks should be unrelated to this, but boot method (UEFI or BIOS)
> may play a role (that is not fully analyzed).
>
> We need more details, like full dmesg.
>
> Does the kernel probe the correct display connection?
>
> There are a few i915 PRs open that are caused by the wrong connector being
> used or the proper connector not responding, so the display capabilities
> can not be read, but there may be other reasons why the kernel can not
> read the EDID data.
Please find attached the 10.0 dmesg and the diff from 9.2 dmesg to 10.0
dmesg (not edited while the huge majority of differences are that PCI
ids are translated to strings about vendor and product).
Best,
--
Thierry Laronde <tlaronde +AT+ polynum +dot+ com>
http://www.kergis.com/
http://kertex.kergis.com/
Key fingerprint = 0FF7 E906 FBAF FE95 FD89 250D 52B1 AE95 6006 F40C
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.0_BETA (CONFIG) #0: Sun Jan 22 11:01:04 CET 2023
tlaronde@cauchy.polynum.local:/usr/obj/polynum.NODECONF-cauchy.polynum.local_netbsd-9.2-amd64_netbsd-amd64/netbsd/obj/sys/arch/amd64/compile/CONFIG
total memory = 8120 MB
avail memory = 7834 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DDF9A078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DDFA7AC8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DDF9A188 00D940 (v02 ALASKA A M I 00000034 INTL 20120711)
ACPI: FACS 0x00000000DDFC7F80 000040
ACPI: APIC 0x00000000DDFA7BD8 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DDFA7C40 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DDFA7C88 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000DDFA81C8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 0x00000000DDFA8CA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DDFA8CE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DDFA8D18 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DDFA9088 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: ASF! 0x00000000DDFAC570 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, id 0x306c3
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, id 0x306c3
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E7E9B90F808 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, 16-byte FIFO
lpt0 at acpi0 (LPTE, PNP0400): io 0x378-0x37f irq 5
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi1 at acpi0 (WMIO, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
ACPI: Enabled 6 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Haswell Host Bridge, DRAM (rev. 0x06)
ppb0 at pci0 dev 1 function 0: Intel Haswell PCI-E x16 Controller (rev. 0x06)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: ATI Technologies Radeon HD 5000/6000/7350/8350 Series (rev. 0x00)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 1, ISS 0, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
audio0 at hdafg0: playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
xhci0 at pci0 dev 20 function 0: Intel 8 Series USB xHCI (rev. 0x05)
xhci0: 64-bit DMA
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
Intel 8 Series MEI Controller (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: Intel 8 Series USB EHCI (rev. 0x05)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi2 vec 0
hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg1 at hdaudio1: Realtek ALC892
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio1: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb1 at pci0 dev 28 function 0: Intel 8 Series PCIe (rev. 0xd5)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: Intel 8 Series PCIe (rev. 0xd5)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msix3 vec 0
re0: RTL8168G/8111G (0x4c00)
re0: Ethernet address 44:8a:5b:9b:9f:0f
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 5: Intel 8 Series PCIe (rev. 0xd5)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re1 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re1: interrupting at msix4 vec 0
re1: RTL8168E/8111E (0x2c00)
re1: Ethernet address e8:de:27:01:f4:55
re1: using 256 tx descriptors
rgephy1 at re1 phy 7: RTL8211D 1000BASE-T media interface
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 28 function 6: Intel 8 Series PCIe (rev. 0xd5)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci5 dev 0 function 0: JMicron Technology JMB368 PATA Controller (rev. 0x00)
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 18
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is PATA
atabus0 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
ehci1 at pci0 dev 29 function 0: Intel 8 Series USB EHCI (rev. 0x05)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel B85 LPC (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ahcisata0 at pci0 dev 31 function 2: Intel 8 Series (desktop) SATA Controller (AHCI) (rev. 0x05)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
ahcisata0: interrupting at msi5 vec 0
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 1
atabus3 at ahcisata0 channel 2
atabus4 at ahcisata0 channel 3
atabus5 at ahcisata0 channel 4
atabus6 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: Intel 8 Series SMBus Controller (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr2 at pcppi0: PC Speaker
wsbell at spkr2 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 53000 mW, 3000 MHz
acpicpu0: P1: FFH, lat 10 us, pow 50301 mW, 2900 MHz
acpicpu0: P2: FFH, lat 10 us, pow 46082 mW, 2700 MHz
acpicpu0: P3: FFH, lat 10 us, pow 43525 mW, 2600 MHz
acpicpu0: P4: FFH, lat 10 us, pow 39557 mW, 2400 MHz
acpicpu0: P5: FFH, lat 10 us, pow 37137 mW, 2300 MHz
acpicpu0: P6: FFH, lat 10 us, pow 33398 mW, 2100 MHz
acpicpu0: P7: FFH, lat 10 us, pow 31112 mW, 2000 MHz
acpicpu0: P8: FFH, lat 10 us, pow 27610 mW, 1800 MHz
acpicpu0: P9: FFH, lat 10 us, pow 25455 mW, 1700 MHz
acpicpu0: P10: FFH, lat 10 us, pow 22171 mW, 1500 MHz
acpicpu0: P11: FFH, lat 10 us, pow 20144 mW, 1400 MHz
acpicpu0: P12: FFH, lat 10 us, pow 17084 mW, 1200 MHz
acpicpu0: P13: FFH, lat 10 us, pow 15181 mW, 1100 MHz
acpicpu0: P14: FFH, lat 10 us, pow 12329 mW, 900 MHz
acpicpu0: P15: FFH, lat 10 us, pow 10550 mW, 800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3000002000 Hz quality 3000
uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 3: device present, speed: 6.0Gb/s
ugen0 at uhub1 port 1
ugen0: Canon (0x04a9) CanoScan (0x190e), rev 2.00/7.04, addr 1
ugen0: autoconfiguration error: setting configuration index 0 failed
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Cherry (0x046a) USB keyboard (0xb090), rev 2.00/1.03, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub1 port 3 configuration 1 interface 1
uhidev1: Cherry (0x046a) USB keyboard (0xb090), rev 2.00/1.03, addr 2, iclass 3/0
uhidev1: 5 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 8008 (0x8008), class 9/0, rev 2.00/0.05, addr 2
uhub4: single transaction translator
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 8000 (0x8000), class 9/0, rev 2.00/0.05, addr 2
uhub5: single transaction translator
uhub4: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhidev2 at uhub1 port 6 configuration 1 interface 0
uhidev2: vendor 1bcf (0x1bcf) USB Optical Mouse (0x0005), rev 2.00/0.14, addr 3, iclass 3/1
uhidev2: 1 report ids
ums0 at uhidev2 reportid 1: 5 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <ASUS DRW-24F1ST a, S10L68BF4001TQ, 1.00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0 at atabus2 drive 0
wd0: <WDC WD1003FZEX-00MK2A0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect)
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd1 at atabus4 drive 0
wd1: <WDC WD1003FZEX-00MK2A0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect)
wd1: GPT GUID: b580e607-f2e2-4961-b647-50c25b02c29b
dk0 at wd1: "EFI System", 262144 blocks at 4096, type: msdos
dk1 at wd1: "cauchy_src", 8388608 blocks at 16777250, type: ffs
dk2 at wd1: "cauchy_xsrc", 4194304 blocks at 25165858, type: ffs
dk3 at wd1: "cauchy_cvs", 41943040 blocks at 29360162, type: ffs
dk4 at wd1: "polynum_src", 41943040 blocks at 71303202, type: ffs
dk5 at wd1: "cauchy_x", 41943040 blocks at 113246242, type: ffs
dk6 at wd1: "cauchy_m", 419430400 blocks at 155189282, type: ffs
dk7 at wd1: "Plan9", 200000000 blocks at 574619682, type: <unknown>
dk8 at wd1: "cauchy_swap", 16511010 blocks at 266240, type: swap
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd1(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE164 0x00).
register mmio base: 0xf7e20000
register mmio size: 131072
ATOM BIOS: C09302
radeon0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
Detected VRAM RAM=400M, BAR=256M
RAM width 64bits DDR
Zone kernel: Available graphics memory: 9007199254079374 KiB
Zone dma32: Available graphics memory: 2097152 KiB
radeon: 1024M of VRAM memory ready
radeon: 1024M of GTT memory ready.
Loading CEDAR Microcode
Internal thermal controller with fan control
radeon: dpm initialized
GART: num cpu pages 262144, num gpu pages 262144
PCIE GART of 1024M enabled (table at 0x000000000014C000).
radeon0: WB enabled
radeon0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xffff8e7e9c79fc00
radeon0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xffff8e7e9c79fc0c
radeon0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffffa6023b79c418
Supports vblank timestamp caching Rev 2 (21.10.2013).
Driver supports precise vblank timestamp query.
radeon0: radeon: MSI limited to 32-bit
radeon0: radeon: using MSI.
radeon0: interrupting at msi6 vec 0 (radeon0)
radeon: irq initialized.
ring test on 0 succeeded in 1 usecs
ring test on 3 succeeded in 2 usecs
ring test on 5 succeeded in 1 usecs
UVD initialized successfully.
ib test on ring 0 succeeded in 0 usecs
ib test on ring 3 succeeded in 0 usecs
umass0 at uhub0 port 5 configuration 1 interface 0
umass0: JetFlash (0x8564) Mass Storage Device (0x1000), rev 3.00/11.00, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <JetFlash, Transcend 16GB, 1100> disk removable
sd0: fabricating a geometry
sd0: 15064 MB, 15064 cyl, 64 head, 32 sec, 512 bytes/sect x 30851072 sectors
sd0: fabricating a geometry
ib test on ring 5 succeeded
Radeon Display Connectors
Connector 0:
HDMI-A-1
HPD2
DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
Encoders:
DFP1: INTERNAL_UNIPHY1
Connector 1:
DVI-I-1
HPD4
DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
Encoders:
DFP2: INTERNAL_UNIPHY
CRT1: INTERNAL_KLDSCP_DAC1
Connector 2:
VGA-1
DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
Encoders:
CRT2: INTERNAL_KLDSCP_DAC2
radeondrmkmsfb0 at radeon0
Initialized radeon 2.50.0 20080528 for radeon0 on minor 0
radeondrmkmsfb0: framebuffer at 0xe034d000, size 1600x900, depth 32, stride 6400
no data for est. mode 640x480x67
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
no data for est. mode 640x480x67
wsdisplay0: screen 1 added (default, vt100 emulation)
no data for est. mode 640x480x67
wsdisplay0: screen 2 added (default, vt100 emulation)
no data for est. mode 640x480x67
wsdisplay0: screen 3 added (default, vt100 emulation)
no data for est. mode 640x480x67
wsdisplay0: screen 4 added (default, vt100 emulation)
--- NetBSD9.2.dmesg 2023-01-22 14:14:51.993559249 +0100
+++ NetBSD10.dmesg 2023-01-22 14:15:52.253510547 +0100
@@ -1,19 +1,16 @@
-Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
-2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
-2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
+Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
+2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
+The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
-NetBSD 9.2 (CONFIG) #0: Fri Jul 2 16:51:15 CEST 2021
- tlaronde@cauchy.polynum.local:/usr/obj/polynum.NODECONF-cauchy.polynum.local_netbsd-9.1-amd64_netbsd-amd64/obj/sys/arch/amd64/compile/CONFIG
+NetBSD 10.0_BETA (CONFIG) #0: Sun Jan 22 11:01:04 CET 2023
+ tlaronde@cauchy.polynum.local:/usr/obj/polynum.NODECONF-cauchy.polynum.local_netbsd-9.2-amd64_netbsd-amd64/netbsd/obj/sys/arch/amd64/compile/CONFIG
total memory = 8120 MB
-avail memory = 7865 MB
-cpu_rng: RDRAND
-rnd: seeded with 256 bits
+avail memory = 7834 MB
timecounter: Timecounters tick every 10.000 msec
-running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
-MSI MS-7823 (1.0)
mainbus0 (root)
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DDF9A078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
@@ -32,16 +29,17 @@
ACPI: 5 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
+cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, id 0x306c3
-cpu0: package 0, core 0, smt 0
+cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, id 0x306c3
-cpu1: package 0, core 1, smt 0
-acpi0 at mainbus0: Intel ACPICA 20190405
+cpu1: node 0, package 0, core 1, smt 0
+acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
-ACPI: SSDT 0xFFFF9E44B63A9808 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
+ACPI: SSDT 0xFFFF8E7E9B90F808 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
@@ -50,21 +48,15 @@
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
-LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
-CWDT (INT3F0D) at acpi0 not configured
-SIO1 (PNP0C02) at acpi0 not configured
-com2 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
-com2: ns16550a, working fifo
-LPTE (PNP0400) at acpi0 not configured
-RMSC (PNP0C02) at acpi0 not configured
+com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
+com0: ns16550a, 16-byte FIFO
+lpt0 at acpi0 (LPTE, PNP0400): io 0x378-0x37f irq 5
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
-PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi1 at acpi0 (WMIO, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
-PTMD (INT3394) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
@@ -82,73 +74,84 @@
ACPI: Enabled 6 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
-pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c00 (rev. 0x06)
-ppb0 at pci0 dev 1 function 0: vendor 8086 product 0c01 (rev. 0x06)
+pchb0 at pci0 dev 0 function 0: Intel Haswell Host Bridge, DRAM (rev. 0x06)
+ppb0 at pci0 dev 1 function 0: Intel Haswell PCI-E x16 Controller (rev. 0x06)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
-radeon0 at pci1 dev 0 function 0: vendor 1002 product 68f9 (rev. 0x00)
+radeon0 at pci1 dev 0 function 0: ATI Technologies Radeon HD 5000/6000/7350/8350 Series (rev. 0x00)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
-hdafg0 at hdaudio0: vendor 1002 product aa01
+hdaudio0: HDA ver. 1.0, OSS 1, ISS 0, BSS 0, SDO 1, 64-bit
+hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
-xhci0 at pci0 dev 20 function 0: vendor 8086 product 8c31 (rev. 0x05)
+audio0 at hdafg0: playback
+audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
+spkr0 at audio0: PC Speaker (synthesized)
+wsbell at spkr0 not configured
+xhci0 at pci0 dev 20 function 0: Intel 8 Series USB xHCI (rev. 0x05)
+xhci0: 64-bit DMA
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
-vendor 8086 product 8c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
-ehci0 at pci0 dev 26 function 0: vendor 8086 product 8c2d (rev. 0x05)
+Intel 8 Series MEI Controller (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
+ehci0 at pci0 dev 26 function 0: Intel 8 Series USB EHCI (rev. 0x05)
+ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
+ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi2 vec 0
-hdafg1 at hdaudio1: vendor 10ec product 0892
+hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
+hdafg1 at hdaudio1: Realtek ALC892
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
-audio0 at hdafg1: playback, capture, full duplex, independent
-audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
-audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
-spkr0 at audio0: PC Speaker (synthesized)
-wsbell at spkr0 not configured
-ppb1 at pci0 dev 28 function 0: vendor 8086 product 8c10 (rev. 0xd5)
+audio1 at hdafg1: playback, capture, full duplex, independent
+audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
+audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
+spkr1 at audio1: PC Speaker (synthesized)
+wsbell at spkr1 not configured
+ppb1 at pci0 dev 28 function 0: Intel 8 Series PCIe (rev. 0xd5)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
-ppb2 at pci0 dev 28 function 4: vendor 8086 product 8c18 (rev. 0xd5)
+ppb2 at pci0 dev 28 function 4: Intel 8 Series PCIe (rev. 0xd5)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msix3 vec 0
+re0: RTL8168G/8111G (0x4c00)
re0: Ethernet address 44:8a:5b:9b:9f:0f
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
-ppb3 at pci0 dev 28 function 5: vendor 8086 product 8c1a (rev. 0xd5)
+ppb3 at pci0 dev 28 function 5: Intel 8 Series PCIe (rev. 0xd5)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re1 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re1: interrupting at msix4 vec 0
+re1: RTL8168E/8111E (0x2c00)
re1: Ethernet address e8:de:27:01:f4:55
re1: using 256 tx descriptors
rgephy1 at re1 phy 7: RTL8211D 1000BASE-T media interface
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
-ppb4 at pci0 dev 28 function 6: vendor 8086 product 8c1c (rev. 0xd5)
+ppb4 at pci0 dev 28 function 6: Intel 8 Series PCIe (rev. 0xd5)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
-jmide0 at pci5 dev 0 function 0: vendor 197b product 2368 (rev. 0x00)
+jmide0 at pci5 dev 0 function 0: JMicron Technology JMB368 PATA Controller (rev. 0x00)
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 18
jmide0: PCI IDE interface used
@@ -158,14 +161,16 @@
atabus0 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
-ehci1 at pci0 dev 29 function 0: vendor 8086 product 8c26 (rev. 0x05)
+ehci1 at pci0 dev 29 function 0: Intel 8 Series USB EHCI (rev. 0x05)
+ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
+ehci1: Using DMA subregion for control data structures
usb3 at ehci1: USB revision 2.0
-ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8c50 (rev. 0x05)
+ichlpcib0 at pci0 dev 31 function 0: Intel B85 LPC (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
-ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8c02 (rev. 0x05)
+ahcisata0 at pci0 dev 31 function 2: Intel 8 Series (desktop) SATA Controller (AHCI) (rev. 0x05)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
ahcisata0: interrupting at msi5 vec 0
@@ -175,15 +180,14 @@
atabus4 at ahcisata0 channel 3
atabus5 at ahcisata0 channel 4
atabus6 at ahcisata0 channel 5
-ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8c22 (rev. 0x05)
+ichsmb0 at pci0 dev 31 function 3: Intel 8 Series SMBus Controller (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
-lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
-spkr1 at pcppi0: PC Speaker
-wsbell at spkr1 not configured
+spkr2 at pcppi0: PC Speaker
+wsbell at spkr2 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
@@ -209,21 +213,43 @@
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
-timecounter: Timecounter "TSC" frequency 3000177440 Hz quality 3000
-uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
+timecounter: Timecounter "TSC" frequency 3000002000 Hz quality 3000
+uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
-uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
+uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
IPsec: Initialized Security Association Processing.
-uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
+uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
-uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
+uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 3: device present, speed: 6.0Gb/s
ugen0 at uhub1 port 1
-ugen0: Canon (0x4a9) CanoScan (0x190e), rev 2.00/7.04, addr 1
+ugen0: Canon (0x04a9) CanoScan (0x190e), rev 2.00/7.04, addr 1
+ugen0: autoconfiguration error: setting configuration index 0 failed
+uhidev0 at uhub1 port 3 configuration 1 interface 0
+uhidev0: Cherry (0x046a) USB keyboard (0xb090), rev 2.00/1.03, addr 2, iclass 3/1
+ukbd0 at uhidev0
+wskbd0 at ukbd0: console keyboard
+uhidev1 at uhub1 port 3 configuration 1 interface 1
+uhidev1: Cherry (0x046a) USB keyboard (0xb090), rev 2.00/1.03, addr 2, iclass 3/0
+uhidev1: 5 report ids
+uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
+uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
+uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
+uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 8008 (0x8008), class 9/0, rev 2.00/0.05, addr 2
+uhub4: single transaction translator
+uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 8000 (0x8000), class 9/0, rev 2.00/0.05, addr 2
+uhub5: single transaction translator
+uhub4: 6 ports with 6 removable, self powered
+uhub5: 6 ports with 6 removable, self powered
+uhidev2 at uhub1 port 6 configuration 1 interface 0
+uhidev2: vendor 1bcf (0x1bcf) USB Optical Mouse (0x0005), rev 2.00/0.14, addr 3, iclass 3/1
+uhidev2: 1 report ids
+ums0 at uhidev2 reportid 1: 5 buttons, W and Z dirs
+wsmouse0 at ums0 mux 0
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <ASUS DRW-24F1ST a, S10L68BF4001TQ, 1.00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
@@ -231,13 +257,13 @@
wd0 at atabus2 drive 0
wd0: <WDC WD1003FZEX-00MK2A0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
-wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (0 bytes/physsect)
+wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect)
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd1 at atabus4 drive 0
wd1: <WDC WD1003FZEX-00MK2A0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
-wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (0 bytes/physsect)
+wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect)
wd1: GPT GUID: b580e607-f2e2-4961-b647-50c25b02c29b
dk0 at wd1: "EFI System", 262144 blocks at 4096, type: msdos
dk1 at wd1: "cauchy_src", 8388608 blocks at 16777250, type: ffs
@@ -250,63 +276,45 @@
dk8 at wd1: "cauchy_swap", 16511010 blocks at 266240, type: swap
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd1(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
-uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 8008 (0x8008), class 9/0, rev 2.00/0.05, addr 2
-uhub4: single transaction translator
-uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 8000 (0x8000), class 9/0, rev 2.00/0.05, addr 2
-uhub5: single transaction translator
-uhub5: 6 ports with 6 removable, self powered
-uhub4: 6 ports with 6 removable, self powered
-uhidev0 at uhub1 port 3 configuration 1 interface 0
-uhidev0: Cherry (0x46a) USB keyboard (0xb090), rev 2.00/1.03, addr 2, iclass 3/1
-ukbd0 at uhidev0
-wskbd0 at ukbd0: console keyboard
-uhidev1 at uhub1 port 3 configuration 1 interface 1
-uhidev1: Cherry (0x46a) USB keyboard (0xb090), rev 2.00/1.03, addr 2, iclass 3/0
-uhidev1: 5 report ids
-uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
-uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
-uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
-uhidev2 at uhub1 port 6 configuration 1 interface 0
-uhidev2: vendor 1bcf (0x1bcf) USB Optical Mouse (0x05), rev 2.00/0.14, addr 3, iclass 3/1
-uhidev2: 1 report ids
-ums0 at uhidev2 reportid 1: 5 buttons, W and Z dirs
-wsmouse0 at ums0 mux 0
+swwdog0: software watchdog initialized
+WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
-kern.module.path=/stand/amd64/9.2/modules
-kern info: [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE164).
-kern info: [drm] register mmio base: 0xf7e20000
-kern info: [drm] register mmio size: 131072
-kern info: ATOM BIOS: C09302
-radeon0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
-radeon0: info: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
-kern info: [drm] Detected VRAM RAM=400M, BAR=256M
-kern info: [drm] RAM width 64bits DDR
-Zone kernel: Available graphics memory: 2601178 kiB
-Zone dma32: Available graphics memory: 2097152 kiB
-kern info: [drm] radeon: 1024M of VRAM memory ready
-kern info: [drm] radeon: 1024M of GTT memory ready.
-kern info: [drm] Loading CEDAR Microcode
-kern info: [drm] Internal thermal controller with fan control
-kern info: [drm] radeon: dpm initialized
-kern info: [drm] GART: num cpu pages 262144, num gpu pages 262144
-kern info: [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
-radeon0: info: WB enabled
-radeon0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xffff9e44b5b84c00
-radeon0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xffff9e44b5b84c0c
-radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffffb000ae611418
-kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-kern info: [drm] Driver supports precise vblank timestamp query.
-radeon0: info: radeon: MSI limited to 32-bit
-radeon0: interrupting at ioapic0 pin 16 (radeon0)
-kern info: [drm] radeon: irq initialized.
-kern info: [drm] ring test on 0 succeeded in 1 usecs
-kern info: [drm] ring test on 3 succeeded in 2 usecs
-kern info: [drm] ring test on 5 succeeded in 1 usecs
-kern info: [drm] UVD initialized successfully.
-kern info: [drm] ib test on ring 0 succeeded in 0 usecs
-kern info: [drm] ib test on ring 3 succeeded in 0 usecs
+kern.module.path=/stand/amd64/10.0/modules
+initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE164 0x00).
+register mmio base: 0xf7e20000
+register mmio size: 131072
+ATOM BIOS: C09302
+radeon0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
+radeon0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
+Detected VRAM RAM=400M, BAR=256M
+RAM width 64bits DDR
+Zone kernel: Available graphics memory: 9007199254079374 KiB
+Zone dma32: Available graphics memory: 2097152 KiB
+radeon: 1024M of VRAM memory ready
+radeon: 1024M of GTT memory ready.
+Loading CEDAR Microcode
+Internal thermal controller with fan control
+radeon: dpm initialized
+GART: num cpu pages 262144, num gpu pages 262144
+PCIE GART of 1024M enabled (table at 0x000000000014C000).
+radeon0: WB enabled
+radeon0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xffff8e7e9c79fc00
+radeon0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xffff8e7e9c79fc0c
+radeon0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffffa6023b79c418
+Supports vblank timestamp caching Rev 2 (21.10.2013).
+Driver supports precise vblank timestamp query.
+radeon0: radeon: MSI limited to 32-bit
+radeon0: radeon: using MSI.
+radeon0: interrupting at msi6 vec 0 (radeon0)
+radeon: irq initialized.
+ring test on 0 succeeded in 1 usecs
+ring test on 3 succeeded in 2 usecs
+ring test on 5 succeeded in 1 usecs
+UVD initialized successfully.
+ib test on ring 0 succeeded in 0 usecs
+ib test on ring 3 succeeded in 0 usecs
umass0 at uhub0 port 5 configuration 1 interface 0
umass0: JetFlash (0x8564) Mass Storage Device (0x1000), rev 3.00/11.00, addr 4
umass0: using SCSI over Bulk-Only
@@ -315,69 +323,37 @@
sd0: fabricating a geometry
sd0: 15064 MB, 15064 cyl, 64 head, 32 sec, 512 bytes/sect x 30851072 sectors
sd0: fabricating a geometry
-kern info: [drm] ib test on ring 5 succeeded
-kern info: [drm] Radeon Display Connectors
-kern info: [drm] Connector 0:
-kern info: [drm] HDMI-A-1
-kern info: [drm] HPD2
-kern info: [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
-kern info: [drm] Encoders:
-kern info: [drm] DFP1: INTERNAL_UNIPHY1
-kern info: [drm] Connector 1:
-kern info: [drm] DVI-I-1
-kern info: [drm] HPD4
-kern info: [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
-kern info: [drm] Encoders:
-kern info: [drm] DFP2: INTERNAL_UNIPHY
-kern info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
-kern info: [drm] Connector 2:
-kern info: [drm] VGA-1
-kern info: [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
-kern info: [drm] Encoders:
-kern info: [drm] CRT2: INTERNAL_KLDSCP_DAC2
+ib test on ring 5 succeeded
+Radeon Display Connectors
+Connector 0:
+HDMI-A-1
+HPD2
+DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
+Encoders:
+DFP1: INTERNAL_UNIPHY1
+Connector 1:
+DVI-I-1
+HPD4
+DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
+Encoders:
+DFP2: INTERNAL_UNIPHY
+CRT1: INTERNAL_KLDSCP_DAC1
+Connector 2:
+VGA-1
+DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
+Encoders:
+CRT2: INTERNAL_KLDSCP_DAC2
radeondrmkmsfb0 at radeon0
-radeondrmkmsfb0: framebuffer at 0xffffb000aec89000, size 1600x900, depth 32, stride 6400
+Initialized radeon 2.50.0 20080528 for radeon0 on minor 0
+radeondrmkmsfb0: framebuffer at 0xe034d000, size 1600x900, depth 32, stride 6400
+no data for est. mode 640x480x67
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
+no data for est. mode 640x480x67
wsdisplay0: screen 1 added (default, vt100 emulation)
+no data for est. mode 640x480x67
wsdisplay0: screen 2 added (default, vt100 emulation)
+no data for est. mode 640x480x67
wsdisplay0: screen 3 added (default, vt100 emulation)
+no data for est. mode 640x480x67
wsdisplay0: screen 4 added (default, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index