tech-kern archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: dbcool, envsys, powerd shutting down my machine



 On 1 February 2016 at 08:53, Julian Coleman <jdc%coris.org.uk@localhost> wrote:
>> [lm0]
>>      Fan0:       N/A
>>      Fan1:      3245                                      RPM
>>      Fan2:       N/A
>
> I don't think that the chips that lm supports have fan speed adjustment,
> so lm0 fan1 will always run at 100%.  It does make sense for dbcool0 fan3
> to be connected to the CPU fan, but it's hard to be sure.

The above is not necessarily correct -- many of the chips supported by
the lm(4) driver, on NetBSD, OpenBSD and DragonFly BSD, certainly do,
in fact, implement a whole bunch of fan-controlling features; see
http://sensors.cnst.su/fanctl/ for a sample BSD implementation of the
fan controlling logic.

From the manual you've found, ftp://ftp.tyan.com/manuals/m_s2882d_100.pdf:

>>>> ? Winbond W83627HF Super I/O chip
>>>> ? Analog Devices ADM1027 Hardware
>>>> Monitoring IC

Winbond W83627HF is supported by both http://mdoc.su/o,n,d/wbsio.4 and
http://mdoc.su/n,o,d/lm.4, and is one of the chips supported by the
fanctl patch above, too.

However, the above manual from Tyan doesn't appear to specify how
exactly are the fans actually wired up (e.g., to which pins on which
chip).

Cheers,
Constantine.


Home | Main Index | Thread Index | Old Index