tech-kern archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Marvell 88SE9230 AHCI?

On 2014/07/24 14:17, Masanobu SAITOH wrote:
On 2014/07/24 14:16, Masanobu SAITOH wrote:
On 2014/07/24 1:31, Manuel Bouyer wrote:
On Wed, Jul 23, 2014 at 08:46:34AM -0400, Thor Lancelot Simon wrote:
I just ordered a Supermicro low-power rackmount x86 machine which -- I
discovered after ordering it -- uses a Marvell 88SE9230 as a SATA controller.

>From FreeBSD's ahci.c, I see this is approximately an AHCI compatible
controller but that it has some quirks.\

I noticed that quirk, too. I checked their change one month ago.
Perhaps the following changes might help:

 Is anyone using NetBSD with this
controller or the similar 88SE9128, 9128, or 9130?

There is an entry 88SE9128 in netbsd-6's ahcisata_pci.c, so at last this
one works I guess.

  I have SuperMicro X9SBAA-F which has 88SE9128.


I tested with two different disks. One works fine
but another didn't work with "IDENTIFY faied" message.
I've not investigated the detail yet.

                SAITOH Masanobu (

Home | Main Index | Thread Index | Old Index