[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: "adapter resource shortage"?
>> sd1(mpt0:0:1:0): adapter resource shortage
> This could be caused by the driver not reserving enough command slots
> for its internal use. I committed a fix to reduce the maximum
> commands the scsipi layer would try to use (rev 1.17 of
> src/sys/dev/ic/mpt_netbsd.c, which should be in the 5.2 branch).
I have mpt_netbsd.c 184.108.40.206; getting cvsweb to cough up diffs from
1.16 to 1.17 of mpt_netbsd.c and comparing them against 220.127.116.11 makes
me think I do have that delta.
> You might want to try reducing the scsipi openings a couple more and
> see if that helps.
That is, s/2/5/ or some such on the
adapt->adapt_openings = maxq - 2; /* Reserve 2 for driver use*/
adapt->adapt_max_periph = maxq - 2;
lines, right? (I'd want to check that maxq is at least 6 first....)
I'll try that.
Main Index |
Thread Index |