Fixed mouse problem EHCI/OHCI USB conflict in kernel

["B. Douglas Hilton" <dugztor%gmail.com@localhost>]

Some guys in #netbsd irc suggested I send you a note about this in
case somebody has similar issues.

After installing 5.1, my mouse didn't work. After some messing around
I tried unplugging and replugging it.
This activated the mouse, but in the console it kept resetting about
every 30 seconds.
This brought to mind some similar issue I had a long time back with
some linux system and I suspected
that the Intel EHCI driver was being used rather than the AMD OHCI USB driver.

I recompiled my kernel without EHCI and the mouse was recognized at
bootup and works fine now.

The irc guys also suggested I send the output of dmesg, so here's my
original and fixed kernel dmesg

- Doug

****************
*** original ***
****************

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sat Nov  6 13:19:33 UTC 2010
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 8190 MB
avail memory = 7925 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xfc560 (30 entries)
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2512MHz, id 0x100f23
cpu1 at mainbus0 apid 1: AMD 686-class, 2512MHz, id 0x100f23
cpu2 at mainbus0 apid 2: AMD 686-class, 2512MHz, id 0x100f23
cpu3 at mainbus0 apid 3: AMD 686-class, 2512MHz, id 0x100f23
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <090710,RSDT2113,20100907>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
pckbc1 at acpi0 (PSKE, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PSMS, PNP0F03) (aux port): irq 12
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
UAR2 (PNP0510) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
UAR1 (PNP0501) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1002 product 0x5957 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 0x1002 product 0x5978 (rev. 0x00)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x944c (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
azalia0 at pci1 dev 0 function 1: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 19
azalia0: host: 0x1002/0xaa30 (rev. 0), HDA rev. 1.0
ppb1 at pci0 dev 10 function 0: vendor 0x1002 product 0x597f (rev. 0x00)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 1
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet
(rev. 0x03)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 00:25:22:8a:30:b5
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: AHCI revision 1.1, 6 ports, 32 command slots, features 0xf722e080
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0
piixpm0: vendor 0x1002 product 0x4385 (rev. 0x3c)
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1
ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus6 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus7 at ixpide0 channel 1
azalia1 at pci0 dev 20 function 2: Generic High Definition Audio Controller
azalia1: interrupting at ioapic0 pin 16
azalia1: host: 0x1002/0x4383 (rev. 0), HDA rev. 1.0
pcib0 at pci0 dev 20 function 3
pcib0: vendor 0x1002 product 0x439d (rev. 0x00)
ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space enabled
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0
pchb1: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb4 at pci0 dev 24 function 4
pchb4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2512626000 Hz quality 3000
azalia0: codec[0]: ATI R600 HDMI (rev. 1.0), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
azalia1: codec[0]: 0x1106/0x0397 (rev. 0.0), HDA rev. 1.0
audio1 at azalia1: full duplex, playback, capture, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
uhub6 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD5000AACS-00ZUB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-RAM GH22NS30, , 1.01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
umass0 at uhub5 port 3 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.29, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, USB SD Reader, 1.00> disk removable
sd0: drive offline
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <Generic, USB CF Reader, 1.01> disk removable
sd1: drive offline
sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <Generic, USB SM Reader, 1.02> disk removable
sd2: drive offline
sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <Generic, USB MS Reader, 1.03> disk removable
sd3: drive offline
sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3: unable to open device, error = 19
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ubt0 at uhub0 port 2
ubt0: Bluetooth v2.0 Bluetooth V2.0 Dongle, rev 2.00/1.00, addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Chicony Saitek Eclipse Keyboard, rev 2.00/1.30, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Chicony Saitek Eclipse Keyboard, rev 2.00/1.30, addr 2, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=0, output=0, feature=4
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

*************
*** fixed ***
*************

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (Phantom) #0: Tue Sep 20 06:35:24 EDT 2011
        root@:/usr/src/sys/arch/amd64/compile/Phantom
total memory = 8190 MB
avail memory = 7925 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xfc560 (30 entries)
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2512MHz, id 0x100f23
cpu1 at mainbus0 apid 1: AMD 686-class, 2512MHz, id 0x100f23
cpu2 at mainbus0 apid 2: AMD 686-class, 2512MHz, id 0x100f23
cpu3 at mainbus0 apid 3: AMD 686-class, 2512MHz, id 0x100f23
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <090710,RSDT2113,20100907>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
pckbc1 at acpi0 (PSKE, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PSMS, PNP0F03) (aux port): irq 12
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
UAR2 (PNP0510) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
UAR1 (PNP0501) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1002 product 0x5957 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 0x1002 product 0x5978 (rev. 0x00)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x944c (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
azalia0 at pci1 dev 0 function 1: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 19
azalia0: host: 0x1002/0xaa30 (rev. 0), HDA rev. 1.0
ppb1 at pci0 dev 10 function 0: vendor 0x1002 product 0x597f (rev. 0x00)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 1
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet
(rev. 0x03)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 00:25:22:8a:30:b5
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: AHCI revision 1.1, 6 ports, 32 command slots, features 0xf722e080
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
vendor 0x1002 product 0x4396 (USB serial bus, interface 0x20) at pci0
dev 18 function 2 not configured
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb3 at ohci3: USB revision 1.0
vendor 0x1002 product 0x4396 (USB serial bus, interface 0x20) at pci0
dev 19 function 2 not configured
piixpm0 at pci0 dev 20 function 0
piixpm0: vendor 0x1002 product 0x4385 (rev. 0x3c)
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1
ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus6 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus7 at ixpide0 channel 1
azalia1 at pci0 dev 20 function 2: Generic High Definition Audio Controller
azalia1: interrupting at ioapic0 pin 16
azalia1: host: 0x1002/0x4383 (rev. 0), HDA rev. 1.0
pcib0 at pci0 dev 20 function 3
pcib0: vendor 0x1002 product 0x439d (rev. 0x00)
ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space enabled
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb4 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0
pchb1: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb4 at pci0 dev 24 function 4
pchb4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2512636670 Hz quality 3000
azalia0: codec[0]: ATI R600 HDMI (rev. 1.0), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
azalia1: codec[0]: 0x1106/0x0397 (rev. 0.0), HDA rev. 1.0
audio1 at azalia1: full duplex, playback, capture, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD5000AACS-00ZUB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-RAM GH22NS30, , 1.01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
ubt0 at uhub0 port 2
ubt0: Bluetooth v2.0 Bluetooth V2.0 Dongle, rev 2.00/1.00, addr 2
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.29, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, USB SD Reader, 1.00> disk removable
uhidev0 at uhub1 port 1 configuration 1 interface 0sd0: drive offline

uhidev0: Chicony Saitek Eclipse Keyboard, rev 2.00/1.30, addr 2, iclass 3/1
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <Generic, USB CF Reader, 1.01> disk removable
ukbd0 at uhidev0
sd1: drive offline
sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <Generic, USB SM Reader, 1.02> disk removable
sd2: drive offline
sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <Generic, USB MS Reader, 1.03> disk removable
sd3: drive offline
sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3: unable to open device, error = 19
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Chicony Saitek Eclipse Keyboard, rev 2.00/1.30, addr 2, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=0, output=0, feature=4
uhidev2 at uhub0 port 3 configuration 1 interface 0
uhidev2: Logitech USB Optical Mouse, rev 2.00/63.00, addr 3, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)