Subject: NEC Mobilepro880 doesn't boot with current or netbsd-4
To: None <firstname.lastname@example.org, email@example.com,>
From: Andy Ruhl <firstname.lastname@example.org>
Date: 01/20/2007 09:45:06
I grabbed kernels from these places:
Both do not boot. They do boot in an emulated environment using
gxemul, however I noticed that the hardware isn't discovered the same
way as on my real hardware so I don't know if that's relevant.
They do boot on my Mobilepro790 however. I just plug this exact same
CF card into it, and it boots just fine.
Here's the last few lines I get (typed by hand, if more is needed let me know):
mqvideo0: framebuffer address: 0xaa0ea600
trap: TLB miss (load or instr. fetch) in kernel mode
status=0x2, cause=0x8008, epc=0x80297568, vaddr=0
pid=0 cmd=swapper usp=0x0 ksp=0x8037bac8
Stopped in pid 0.1 (swapper) at 0x80297568: lwr t3,a1,-4
80297550+18 (8037bb60,109,0,101) ra 802370d0 sz 0
802370a0+30 (8037bb60,109,0,101) ra 80235af8 sz 40
80235704+3f4 (8037bb60,109,0,101) ra 0 sz 0
User-level: pid 0.1
Again, the above output is from this kernel:
Any help would be appreciated.