In message: <20040930200333.GN31260@che.ojctech.com>
            David Young <dyoung@pobox.com> writes:
: On Thu, Sep 30, 2004 at 09:51:00PM +0200, Jochen Kunz wrote:
: > Hi.
: > 
: > Finaly I tried on a PeeCee with NetBSD 2.0_RC1 after the trouble on
: > Alpha and sparc64 with the PCMCIA code...
: > So I pluged the PCI CardBus bridge into a Pentium II PeeCee, booted the
: > 2.0_RC1 installation floppies and got:
: > wi0 at pcmcia0 function 0: ELSA, AirLancer MC-11, Version 01.01
: > wi0:wi0: command faild, cmd=0x0, arg=0x0
: > wi0: command faild, cmd=0x0, arg=0x0
: > wi0: command faild, cmd=0x0, arg=0x0
: > wi0: command faild, cmd=0x0, arg=0x0
: > wi0: command faild, cmd=0x0, arg=0x0
: > wi0: init failed
: > wi0: failed to attach controller
: > 
: > This PCI CardBus bridge and WLAN card work flawlessly with RedmondOS 2000
: > on that machine. So this must be a problem with wi(4) or our CardBus /
: > PCMCIA code. Any ideas where and how to start looking?
: 
: I strongly suspect that it is the Cardbus/PCMCIA code, since that has
: been changing much more rapidly than wi.

If it isn't that, it may be the case that ELSA changed its chipset
away from prism.  There have been a lot of people that have done that
(changed the card w/o changing the name).

Warner