On Thu, Sep 30, 2004 at 09:51:00PM +0200, Jochen Kunz wrote:
> Hi.
> 
> Finaly I tried on a PeeCee with NetBSD 2.0_RC1 after the trouble on
> Alpha and sparc64 with the PCMCIA code...
> So I pluged the PCI CardBus bridge into a Pentium II PeeCee, booted the
> 2.0_RC1 installation floppies and got:
> wi0 at pcmcia0 function 0: ELSA, AirLancer MC-11, Version 01.01
> wi0:wi0: command faild, cmd=0x0, arg=0x0
> wi0: command faild, cmd=0x0, arg=0x0
> wi0: command faild, cmd=0x0, arg=0x0
> wi0: command faild, cmd=0x0, arg=0x0
> wi0: command faild, cmd=0x0, arg=0x0
> wi0: init failed
> wi0: failed to attach controller
> 
> This PCI CardBus bridge and WLAN card work flawlessly with RedmondOS 2000
> on that machine. So this must be a problem with wi(4) or our CardBus /
> PCMCIA code. Any ideas where and how to start looking?

I strongly suspect that it is the Cardbus/PCMCIA code, since that has
been changing much more rapidly than wi.

Dave

-- 
David Young             OJC Technologies
dyoung@ojctech.com      Urbana, IL * (217) 278-3933