Hi.

I have an AlphaStation 200 4/166 with an ISA PCMCIA bridge, an old modem
and an ELSA WLAN PCMCIA card in it. See dmesg below. wi(4) fails to
attach the ELSA card. According to wi(4) the ELSA AirLancer MC-11 is
supported. The modem card in PCMCIA slot 0 works. So I have to ask:
Is this a problem of NetBSD 2.0G? (Source about 6 weeks old.)
Is this a problem of the wi(4) driver?
Is this a problem of port-alpha?
(I have no other machine with ISA bus to test this constellation.)
???

Also I have a Sun Ultra5 running 2.0_BETA (32 bit kernel) and a:
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision
0x01) at pci0 dev 12 function 0 not configured
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision
0x01) at pci0 dev 12 function 1 not configured
Unfortunately the U5 doesn't detect the CardBus bridge, neither by the
OpenFirmWare, nor by the NetBSD kernel. It looks like the card isn't
pluged in at all. (The above dmesg output was taken with the
AlphaStation. Unfortunately port-alpha lacks CardBus support...)
Any ideas?

NetBSD 2.0G (ickis) #0: Tue Sep 28 12:00:49 CEST 2004
        jkunz@MrPomeroy:/home/tmp/ickis
AlphaStation 200 4/166, 166MHz, s/n 
[...]
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[...]
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (rev. 0x03)
[...]
isa0 at sio0
[...]
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq 
[...]
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
[...]
pcic0: controller 0 detecting irqs with mask 0xdeb8:..5..9
pcic0: using irq 5 for socket events
[...]
pcmcia0: CIS checksum failed
pcmcia0: CIS checksum failed
com2 at pcmcia0 function 0: <Intel, MODEM 2400+, iNC110US, COMPATIBLE
IBM Corp. 14,400+DATA / FAX MODEM>
pcic0: port 0x3e8-0x3ef
stray isa irq 9
pcmcia0: card irq 9
com2: ns16550a, working fifo
wi0 at pcmcia1 function 0: <ELSA, AirLancer MC-11, Version 01.01, >
pcic0: port 0x400-0x43f
stray isa irq 9
pcmcia1: card irq 9
wi0: 802.11 address 00:02:2d:4a:18:5c
wi0: wi_cmd: busy bit won't clear.
wi0: using Unknown Lucent chipwi0: wi_cmd: busy bit won't clear.
wi0: Lucent Firmware: Station (0.0.0)
wi0: wi_cmd: busy bit won't clear.
wi0: using default channel list
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: no supported rate list
wi0: failed to attach controller
-- 



tschüß,
         Jochen

Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/