--LyciRD1jyfeSSjG0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On Sat, Apr 10, 2004 at 08:57:33PM +0200, Manuel Bouyer wrote:
> On Fri, Apr 09, 2004 at 11:45:52PM +0200, Thomas Klausner wrote:
> > I am using a Samsung harddisk on a satalink(4) controller
> > on a 2.0C/i386; it's plugged into the second port.
> > 
> > Recently I added another Samsung hard disk in the primary port.
> > Now, when booting, I have to wait 10-15s in the GRUB boot loader
> > screen and the NetBSD boot loader screen (combined) before allowing
> > the kernel to boot, otherwise NetBSD only detects the hard disk
> > in the second port.
> > 
> > Any ideas what could be causing this? Is this a bug in satalink?
> > Or does the hard disk in the primary port just need longer to
> > spin up? Are there any debugging flags I could try to find out more?
> 
> Yes, you can try to set wdcdebug_mask and wdcdebug_wd_mask to 0x10

Attached are the dmesg outputs of the same kernel when booting
"too fast" and when waiting long enough. Is this enough information
to track this down?

Thanks,
 Thomas

--LyciRD1jyfeSSjG0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.correct"

NetBSD 2.0C (HIRO) #1: Wed Apr 14 20:05:20 CEST 2004
	wiz@hiro:/usr/src/sys/arch/i386/compile/HIRO
total memory = 255 MB
avail memory = 246 MB
BIOS32 rev. 0 found at 0xfb510
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 1500+ (686-class), 1330.09 MHz, id 0x662
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <SOYO  ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (PNP0501-2)
com1: io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
lpt0 at acpi0 (PNP0400)
lpt0: io 0x378-0x37f irq 7
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8366 CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon 9700/9500 Series (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ATI Technologies Radeon 9700/9500 Series Secondary (miscellaneous display) at pci1 dev 0 function 1 not configured
eap0 at pci0 dev 9 function 0: Ensoniq AudioPCI 97 ES1373-8(rev. 0x08)
eap0: interrupting at irq 11
eap0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
eap0: ac97: ext id 200<AMAP>
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
satalink0 at pci0 dev 10 function 0
satalink0: Silicon Image SATALink 3112 (rev. 0x02)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using irq 10 for native-PCI interrupt
atabus0 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus1 at satalink0 channel 1
bktr0 at pci0 dev 11 function 0
bktr0: interrupting at irq 12
bktr0: Hauppauge Model 61314 BM  
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo.
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x02) at pci0 dev 11 function 1 not configured
wi0 at pci0 dev 12 function 0: Intersil Prism2.5 Wireless Lan
wi0: interrupting at irq 11
wi0: 802.11 address 00:09:5b:2f:0e:76
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
cmpci0 at pci0 dev 14 function 0: C-Media Electronics, Inc. CMI8738/C3DX PCI Audio Device (rev. 0x10)
cmpci0: interrupting at irq 11
audio1 at cmpci0: full duplex, mmap, independent
opl0 at cmpci0: model OPL3: LR swapped
midi1 at opl0: CMPCI Yamaha OPL3
mpu0 at cmpci0
midi2 at mpu0: CMPCI MPU-401 MIDI UART
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8233 PCI-ISA Bridge (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8233 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus2 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus3 at viaide0 channel 1
uhci0 at pci0 dev 17 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x1b)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x1b)
uhci1: interrupting at irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 17 function 4: VIA Technologies VT83C572 USB Controller (rev. 0x1b)
uhci2: interrupting at irq 12
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:50:2c:01:4d:dc
icsphy0 at vr0 phy 1: ICS1893 10/100 media interface, rev. 1
icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi3 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
satalink0: port 0: device present, speed: 1.5Gb/s
atabusattach: ch_drive_flags 0x1 0x0
wd0 at atabus0 drive 0wdattach
satalink0: port 1: device present, speed: 1.5Gb/s
atabusattach: ch_drive_flags 0x1 0x0
: <SAMSUNG SP1213C>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232632 cyl, 16 head, 63 sec, 512 bytes/sect x 234493056 sectors
wd0: atap_dmatiming_mimi=120, atap_dmatiming_recom=120
viaide0:0: before reset, st0=0x50, st1=0x0
viaide0:1: before reset, st0=0x50, st1=0x50
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
wd1 at atabus1 drive 0wdattach
: <SAMSUNG SP1614C>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd1: atap_dmatiming_mimi=120, atap_dmatiming_recom=120
viaide0:1:0: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1:1: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1: wdcwait_reset() end, st0=0x0 st1=0x0
viaide0:1: after reset, ret_value=0x3
viaide0:1:0: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1:1: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1: wait DRDY st0 0x0 st1 0x0
__wdcwait: timeout (time=11), status 80 error 80 (mask 0x0 bits 0x0)
__wdcwait: timeout (time=11), status 80 error 80 (mask 0x0 bits 0x0)
__wdcwait: timeout (time=11), status 80 error 80 (mask 0x0 bits 0x0)
atabusattach: ch_drive_flags 0x2 0x2
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
viaide0:0:0: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
viaide0:0:1: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
viaide0:0: wdcwait_reset() end, st0=0x50 st1=0x0
viaide0:0: after reset, ret_value=0x3
viaide0:0:0: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
viaide0:0:1: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
viaide0:0: wait DRDY st0 0x50 st1 0x0
__wdcwait: timeout (time=11), status d0 error d0 (mask 0x0 bits 0x0)
__wdcwait: timeout (time=11), status d0 error d0 (mask 0x0 bits 0x0)
atabusattach: ch_drive_flags 0x1 0x0
wd2 at atabus2 drive 0wdattach
: <ST3120024A>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd2: atap_dmatiming_mimi=120, atap_dmatiming_recom=120
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4040B, K263A9I0519, A300> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <DV-516D                             010, , E1.06> cdrom removable
__wdcwait: timeout (time=1), status d0 error d0 (mask 0x0 bits 0x0)
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
__wdcwait: timeout (time=11), status d0 error 0 (mask 0x40 bits 0x40)
__wdcwait: timeout (time=11), status d0 error 0 (mask 0x40 bits 0x40)
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)

--LyciRD1jyfeSSjG0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.toofast"

NetBSD 2.0C (HIRO) #1: Wed Apr 14 20:05:20 CEST 2004
	wiz@hiro:/usr/src/sys/arch/i386/compile/HIRO
total memory = 255 MB
avail memory = 246 MB
BIOS32 rev. 0 found at 0xfb510
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 1500+ (686-class), 1330.09 MHz, id 0x662
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <SOYO  ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (PNP0501-2)
com1: io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
lpt0 at acpi0 (PNP0400)
lpt0: io 0x378-0x37f irq 7
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8366 CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon 9700/9500 Series (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ATI Technologies Radeon 9700/9500 Series Secondary (miscellaneous display) at pci1 dev 0 function 1 not configured
eap0 at pci0 dev 9 function 0: Ensoniq AudioPCI 97 ES1373-8(rev. 0x08)
eap0: interrupting at irq 11
eap0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
eap0: ac97: ext id 200<AMAP>
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
satalink0 at pci0 dev 10 function 0
satalink0: Silicon Image SATALink 3112 (rev. 0x02)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using irq 10 for native-PCI interrupt
atabus0 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus1 at satalink0 channel 1
bktr0 at pci0 dev 11 function 0
bktr0: interrupting at irq 12
bktr0: Hauppauge Model 61314 BM  
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo.
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x02) at pci0 dev 11 function 1 not configured
wi0 at pci0 dev 12 function 0: Intersil Prism2.5 Wireless Lan
wi0: interrupting at irq 11
wi0: 802.11 address 00:09:5b:2f:0e:76
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
cmpci0 at pci0 dev 14 function 0: C-Media Electronics, Inc. CMI8738/C3DX PCI Audio Device (rev. 0x10)
cmpci0: interrupting at irq 11
audio1 at cmpci0: full duplex, mmap, independent
opl0 at cmpci0: model OPL3: LR swapped
midi1 at opl0: CMPCI Yamaha OPL3
mpu0 at cmpci0
midi2 at mpu0: CMPCI MPU-401 MIDI UART
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8233 PCI-ISA Bridge (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8233 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus2 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus3 at viaide0 channel 1
uhci0 at pci0 dev 17 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x1b)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x1b)
uhci1: interrupting at irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 17 function 4: VIA Technologies VT83C572 USB Controller (rev. 0x1b)
uhci2: interrupting at irq 12
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:50:2c:01:4d:dc
icsphy0 at vr0 phy 1: ICS1893 10/100 media interface, rev. 1
icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi3 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
atabusattach: ch_drive_flags 0x0 0x0
satalink0: port 1: device present, speed: 1.5Gb/s
atabusattach: ch_drive_flags 0x1 0x0
wd0 at atabus1 drive 0wdattach
viaide0:0: before reset, st0=0x50, st1=0x0
: <SAMSUNG SP1614C>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: atap_dmatiming_mimi=120, atap_dmatiming_recom=120
viaide0:1: before reset, st0=0x50, st1=0x50
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
viaide0:1:0: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1:1: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1: wdcwait_reset() end, st0=0x0 st1=0x0
viaide0:1: after reset, ret_value=0x3
viaide0:1:0: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1:1: after reset, sc=0x1 sn=0x1 cl=0x14 ch=0xeb
viaide0:1: wait DRDY st0 0x0 st1 0x0
__wdcwait: timeout (time=11), status 80 error 80 (mask 0x0 bits 0x0)
__wdcwait: timeout (time=11), status 80 error 80 (mask 0x0 bits 0x0)
__wdcwait: timeout (time=11), status 80 error 80 (mask 0x0 bits 0x0)
atabusattach: ch_drive_flags 0x2 0x2
viaide0:0:0: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
viaide0:0:1: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
viaide0:0: wdcwait_reset() end, st0=0x50 st1=0x0
viaide0:0: after reset, ret_value=0x3
viaide0:0:0: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
viaide0:0:1: after reset, sc=0x1 sn=0x1 cl=0x0 ch=0x0
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
viaide0:0: wait DRDY st0 0x50 st1 0x0
__wdcwait: timeout (time=11), status d0 error d0 (mask 0x0 bits 0x0)
__wdcwait: timeout (time=11), status d0 error d0 (mask 0x0 bits 0x0)
atabusattach: ch_drive_flags 0x1 0x0
wd1 at atabus2 drive 0wdattach
: <ST3120024A>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: atap_dmatiming_mimi=120, atap_dmatiming_recom=120
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4040B, K263A9I0519, A300> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <DV-516D                             010, , E1.06> cdrom removable
__wdcwait: timeout (time=1), status d0 error d0 (mask 0x0 bits 0x0)
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
__wdcwait: timeout (time=11), status d0 error 0 (mask 0x40 bits 0x40)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

--LyciRD1jyfeSSjG0--