On Sun, 9 Dec 2001, Lennart Augustsson wrote:

> It looks like the Linux code sets wLength to 0x14 whereas you set it to 250.

Ah, quite correct. I've fixed that, but unfortunately I still run into the
exact same problem. I turned on some more debugging; the dump is appended.

I tried installing a USB sniffer under Windows ME (Japanese)
to see what was going on, but had luck with neither the one
at http://usbsnoop.sourceforge.net/ nor its predecessor at
http://www.jps.net/koma/ . (The Clie refuses to sync when the sniffer
is turned on, though when it's off I can sync fine.)

Any thoughts on where I should go from here? I'm going to try to start
chasing stuff down at the Palm website, but I don't know how far I'll
get with that.

cjs
-- 
Curt Sampson  <cjs@cynic.net>   917 532 4208   http://www.netbsd.org
    Don't you know, in this new Dark Age, we're all light.  --XTC

uvisor0 at uhub0usbd_print dev=0xc0bcd200
port 2
uvisor_attach: sc=0xc0bcd100
usbd_set_config_index: dev=0xc0bcd200 index=0
usb_schedsoftintr: polling=0
usb_schedsoftintr: polling=0
usb_schedsoftintr: polling=0
usbd_set_config_index: status=0x0001, error=NORMAL_COMPLETION
usbd_set_config_index: (addr 1) cno=2 attr=0xc0, selfpowered=1, power=2
usbd_set_config_index: set config 1
usb_schedsoftintr: polling=0
usbd_set_config_index: dev=0xc0bcd200 cdesc=0xc0bd02c0
usbd_fill_iface_data: ifaceidx=0 altidx=0
usbd_find_idesc: idx=0(-1) altidx=0(0) len=9 type=2
usbd_find_idesc: idx=0(-1) altidx=0(0) len=9 type=4
usbd_fill_iface_data: found idesc nendpt=4
usbd_fill_iface_data: endpt=0
usbd_fill_iface_data: p=0xc0bd02d2 end=0xc0bd02ee len=7 type=5
usbd_fill_iface_data: endpt=1
usbd_fill_iface_data: p=0xc0bd02d9 end=0xc0bd02ee len=7 type=5
usbd_fill_iface_data: endpt=2
usbd_fill_iface_data: p=0xc0bd02e0 end=0xc0bd02ee len=7 type=5
usbd_fill_iface_data: endpt=3
usbd_fill_iface_data: p=0xc0bd02e7 end=0xc0bd02ee len=7 type=5
usb_schedsoftintr: polling=0
usb_schedsoftintr: polling=0
usb_schedsoftintr: polling=0
usb_schedsoftintr: polling=0

uvisor0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
uvisor_init: getting connection info
usb_schedsoftintr: polling=0
uvisor_init: PalmOS USB/4.0 hack
usb_schedsoftintr: polling=0
usb_schedsoftintr: polling=0
uvisor_init: unknown 1 failed: 17
uvisor0: init failed, STALLED
uvisor_attach: ATTACH ERROR