In article <Pine.GSO.4.21.0108122353320.11317-100000@rfhpc8320.fh-regensburg.de> you wrote:
> I have ported the umct driver from -current to 1.5.1, but accessing
> /dev/ttyU0 via tip(1) only seems to work in one direction: I can send
> commands to a modem, but don't get a reply. The commands do arrive,
> though: e.g. the modem dials on ATD, but there is no "OK" on just "AT".
> I've tried this with a known-working modem/serial cable and ppp config.

Following up to myself, I've now tried a -current kernel, and it
does only work in one direction either. :(


 - Hubert

-- 
Want to get a clue on IPv6 but don't know where to start? Try this:
* Basics -> http://www.onlamp.com/pub/a/onlamp/2001/05/24/ipv6_tutorial.html
* Setup  -> http://www.onlamp.com/pub/a/onlamp/2001/06/01/ipv6_tutorial.html 
Of course with your #1 IPv6 ready operating system -> http://www.NetBSD.org/