Subject: Intel on-board ethernet controller not detected
To: None <tech-kern@netbsd.org>
From: Rajappa Iyer <rsi@panix.com>
List: tech-kern
Date: 05/21/2001 22:25:23
Hi,

I hope that someone can help me out with this.  I'm trying to bring up
NetBSD 1.5 on an Intel server with an ethernet controller on the
motherboard (Intel 810) as well as an additional ethernet card in a
PCI slot.  The card is detected correctly (fxp), but the on-board
controller is not.  Both Linux and FreeBSD detect this card without
any problems.  Here's my dmesg output: I am not sure why the 82801BA
claims that the ethernet function (apart from other functions) is not
configured.  Is it because NetBSD does not configure it?  If so, how
can I make NetBSD configure it?

Thanks,
Rajappa

NetBSD 1.5 (GENERIC) #1: Sun Nov 19 21:42:11 MET 2000
    fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (E) (686-class)
total memory = 510 MB
avail memory = 467 MB
using 6558 buffers containing 26232 KB of memory
BIOS32 rev. 0 found at 0xfda74
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x1130 (rev. 0x02)
vga1 at pci0 dev 2 function 0: Intel product 0x1132 (rev. 0x02)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge
    (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intel 82801BA LAN Controller (ethernet network, revision 0x01) at pci1 \
    dev 8 function 0 not configured
fxp0 at pci1 dev 10 function 0: Intel i82557 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:02:b3:1d:ab:c0, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x01)
pciide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (rev. 0x01)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel interrupting at irq 14
wd0 at pciide0 channel 0 drive 0: <WDC WD200EB-00BHF0>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 19092 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel interrupting at irq 15
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-6702B, , 1007> type 5 \
    cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x01) at \
    pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x01)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
Intel 82801BA AC-97 Audio Controller (audio multimedia, revision 0x01) \
    at pci0 dev 31 function 5 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ef65 netmask ef65 ttymask ffe7
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

-- 
<rsi@panix.com> a.k.a. Rajappa Iyer.
	They also surf who stand in the waves.