Subject: CVS commit: pkgsrc
To: None <source-changes@netbsd.org>
From: Rene Hexel <rh@netbsd.org>
List: source-changes
Date: 07/22/2000 09:14:57
Module Name:	pkgsrc
Committed By:	rh
Date:		Sat Jul 22 16:14:54 UTC 2000

Modified Files:
	pkgsrc/sysutils/cdrecord: Makefile
	pkgsrc/sysutils/cdrecord/files: md5 patch-sum
	pkgsrc/sysutils/cdrecord/patches: patch-aa patch-ab patch-ac patch-ae
	    patch-af
	pkgsrc/sysutils/cdrecord/pkg: PLIST

Log Message:
Update cdrecord to 1.9.

Changes to 1.8.1 are:

All:

-       Fallback code to use the USCSI interface on Solaris
        This should add ATAPI support on Solaris 8 sparc.
        Solaris 8 x86 does support ATAPI with the scg driver
        as Sun fixed the structural bug for thw Intel version.

        Warning: The USCI interface has several drawbacks:

        -       Only finds disk type devices with -scanbus

        -       Cannot open devices that are currently attached
                to the volume management system

        -       The Goldstar ATAPI CD-ROM in a U-10 transfers data
                but the DMA residual count shows that there has
                been no transfer at all.

        Facit: Test by your own if this interface is usable.
        Please report problems!

        To check the difference:

        cdrecord -scanbus               uses the scg driver
        cdrecord -scanbus dev=USCSI     uses the USCSI interface
        cdrecord -toc    dev=1,6,0      uses the scg driver
        cdrecord -toc   dev=USCSI:1,6,0 uses the USCSI interface

        NOTE: If you are using the USCSI interface you will need
                to shut down the volume management for the drives
                you like to use.

-       Linux code in libscg now tries to use new features of the
        Linus sg driver:

        -       Trying to use more then 32 kB for DMA
                The interface for raising the DMA limit from 32 kB
                is a real pain. It needs a lot of code to adopt
                the interface to libscg.

        -       Trying to use the new ioctl() interface if present.
                This interface now supports:

                -       SCSI CDB sizes for vendor unique commands

                -       SCSI status byte

                -       SCSI command transport status

                -       More than 16 bytes of sense data
                        (not yet working!)

                -       DMA residual count
                        (not yet working!)

                -       Arbitrary DMA address pointers !!!

        -       Trying to use the new RESET ioctl()
                (not yet working!)

        All items marked (not yet working!) will turn funtional
        after the Linux kernel starts to support them.

        It seems that my shouting for a better SCSI interface succeeded.
        Linux-2.4 supports or at least includes an interface that may
	support the needed things in future.

        As from now it is unclear whether the code will expose
        any portability problems, please test on different Linux
        versions from 2.0 ... 2.4 if available and report problems.

-       README.macosX added (needed to know how to compile).
        As Apple deliveres an inconsistent OS, you need to follow the
        instuctions in this README file before you may compile
        cdrtools on Mac OS X.

TODO:

-       Better BeOS integration

Cdrecord:

-       include sys/select.h if needed (AIX)

-       Support for Ricoh 9060 CD-RW/DVD-ROM drive

-       Support for Plextor PX-W1210TA (with BURN-Proof)

-       Printing of new features added to -prcap function

-       New Disk manufacturers:

                "WEALTH FAIR INVESTMENT LIMITE"
                "General Magnetics Ld"
                "MPO"

-       DAO now should work with pregapsize == 0 when
        using Sony or Goldstar drives.

        Cdrecord retries with pregaps set to 1

-       New options -shorttrack & -noshorttrack
        will allow to copy CD's with supershort tracks
        in DAO mode if the drive supports it.

-       Fix for a buffer overflow with cdrecord dev=
        This problem did not exist on sparc systems,
        for this reason it has not been detected before.

-       ATIP Decoder now decodes disk sub type for High speed CD-RW

-       Support for 99 minute CD's.

-       Force the user to use -ignsize to allow >= 90 Minutes on CD even
        when the current CD is not in the blank capacity database.

Cdda2wav:

-       support for cds with illegal leadout (like HIM-CD)

-       bugfix for cd-text detection with plextor/Sony command sets

-       should compile and run under Mac-OS-X now

-       bugfix with the -q (quiet) option

-       bugfix use extra libs (like lossaudio for NetBSD)

-       bugfix use the correct sound device for Solaris

-       hardened cdda2wav against illegal ISRC codes

-       more diagnostics for illegal ISRCs

-       use setpriority in favor of nice

-       updated cdda2mp3 script for lame usage (alpha)

Readcd:

-       minor bugfixes with timing

-       New options -noerror & retries=#

-       restructured to be more flexible

-       Support for C2 error pointer scan with MMC drives &
        the Plextor U-Plex 40 CD-ROM

Mkisofs:

-       Now mkhybrid code is completely integrated into mkisofs.
        There is only one binary. To help users of mkhybrid,
        make install creates a hard link from mkhybroid to mkisofs.

-       man page cleaned up.

-       Now mkhybrid code is completely integrated into mkisofs.
        There is only one binary. To help users of mkhybrid,
        make install creates a hard link from mkhybroid to mkisofs.

-       New Option -eltorito-alt-boot allows to specify more
        than one Al Torito boot image (up to 63).
        Thanks to Egor Duda (deo@logos-m.ru).

-       fixed a core dump problem in multi.c

-       write.c now uses static buffer to circumvent a problem
        with the stone age Metrowerks C found on BeOS/PPC

-       Allow printing of percentage ready without floatingpoint code
        in printf.

-       apple_driver now compiles, but need to call
        make -f apple_driver.mk
        by hand

-       graft pointers are now really usable:

        -       Graft points are now disabled by default

        -       To enable, specify the -graft-point option

                dir=dir only works if the '=' is not escaped by '\'
                '\\' and '=' must be escaped by a '\\' if
                -graft-points has been specified.

-       Now there is no more a need to specify a command line arg
        if -path-list has been specified.


To generate a diff of this commit:
cvs rdiff -r1.31 -r1.32 pkgsrc/sysutils/cdrecord/Makefile
cvs rdiff -r1.5 -r1.6 pkgsrc/sysutils/cdrecord/files/md5
cvs rdiff -r1.6 -r1.7 pkgsrc/sysutils/cdrecord/files/patch-sum
cvs rdiff -r1.4 -r1.5 pkgsrc/sysutils/cdrecord/patches/patch-aa
cvs rdiff -r1.3 -r1.4 pkgsrc/sysutils/cdrecord/patches/patch-ab
cvs rdiff -r1.10 -r1.11 pkgsrc/sysutils/cdrecord/patches/patch-ac
cvs rdiff -r1.2 -r1.3 pkgsrc/sysutils/cdrecord/patches/patch-ae
cvs rdiff -r1.1 -r1.2 pkgsrc/sysutils/cdrecord/patches/patch-af
cvs rdiff -r1.7 -r1.8 pkgsrc/sysutils/cdrecord/pkg/PLIST

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.