[src/trunk]: src/sys/dev/ic add DM9000A register definitions

[nisimura <nisimura%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/729ad94ca8db
branches:  trunk
changeset: 940515:729ad94ca8db
user:      nisimura <nisimura%NetBSD.org@localhost>
date:      Thu Oct 08 21:00:25 2020 +0000

description:
add DM9000A register definitions

diffstat:

 sys/dev/ic/dm9000reg.h |  24 ++++++++++++++++++------
 1 files changed, 18 insertions(+), 6 deletions(-)

diffs (44 lines):

diff -r ad16b54fd037 -r 729ad94ca8db sys/dev/ic/dm9000reg.h
--- a/sys/dev/ic/dm9000reg.h    Thu Oct 08 19:11:35 2020 +0000
+++ b/sys/dev/ic/dm9000reg.h    Thu Oct 08 21:00:25 2020 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: dm9000reg.h,v 1.5 2020/10/08 11:29:04 nisimura Exp $   */
+/*     $NetBSD: dm9000reg.h,v 1.6 2020/10/08 21:00:25 nisimura Exp $   */
 
 /*
  * Copyright (c) 2009 Paul Fleischer
@@ -167,17 +167,29 @@
 #define DM9000_PID1    0x2B    /* product ID 15:8 */
 #define DM9000_CHIPR   0x2C    /* chip revision */
 
-#define DM9000_SMCR    0x2F    /* "serial mode" control */
+#define DM9000_TCR2    0x2D    /* Tx control 2 */
+#define DM9000_OTCR    0x2E    /* operation test control */
+#define DM9000_SMCR    0x2F    /* special mode control */
 #define  DM9000_FB0    (1<<0)  /* force shortest back-off time */
 #define  DM9000_FB1    (1<<1)  /* force longeset back-off time */
 #define  DM9000_FLC    (1<<2)  /* force late collsion */
 #define  DM9000_SM_EN  (1<<7)  /* serial mode enable */
-#define DM9000_MRCMDX  0xF0    /* "no increment"   read byte */
-#define DM9000_MRCMD   0xF2    /* "auto increment" read byte */
+#define DM9000_ETXCSR  0x30    /* early xmit control and status */
+#define DM9000_TCSCR   0x31    /* xmit checksum control */
+#define DM9000_RCSCSR  0x32    /* recv checksum control and status */
+#define DM9000_MPAR    0x33    /* MII PHY address */
+#define DM9000_LEDCR   0x34    /* LED pin control */
+#define DM9000_BUSCR   0x38    /* processor bus control */
+#define DM9000_INTCR   0x39    /* INT pin control */
+#define DM9000_SCCR    0x50    /* system clock turn on control */
+#define DM9000_RSCCR   0x51    /* resume system clock control */
+#define DM9000_MRCMDX  0xF0    /* "no increment" pre-fetch read */
+#define DM9000_MRCMDX1 0xF1    /* "no increment" read */
+#define DM9000_MRCMD   0xF2    /* "auto increment" read */
 #define DM9000_MRRL    0xF4    /* memory read address 7:0 */
 #define DM9000_MRRH    0xF5    /* memory read address 15:8 */
-#define DM9000_MWCMDX  0xF6    /* "no increment"   write byte */
-#define DM9000_MWCMD   0xF8    /* "auto increment" write byte */
+#define DM9000_MWCMDX  0xF6    /* "no increment" write */
+#define DM9000_MWCMD   0xF8    /* "auto increment" write */
 #define DM9000_MWRL    0xFA    /* memory write address 7:0 */
 #define DM9000_MWRH    0xFB    /* memory write address 15:8 */
 #define DM9000_TXPLL   0xFC    /* frame len 7:0 to transmit */