[src/netbsd-1-4]: src/distrib/notes/atari pullup 1.10 ->1.11

[leo <leo%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/a41e2efef32e
branches:  netbsd-1-4
changeset: 468178:a41e2efef32e
user:      leo <leo%NetBSD.org@localhost>
date:      Mon Apr 12 10:30:01 1999 +0000

description:
pullup 1.10 ->1.11
Reality check....

diffstat:

 distrib/notes/atari/hardware |  19 +++++++++++++------
 distrib/notes/atari/xfer     |   6 +++---
 2 files changed, 16 insertions(+), 9 deletions(-)

diffs (64 lines):

diff -r e89fb3664832 -r a41e2efef32e distrib/notes/atari/hardware
--- a/distrib/notes/atari/hardware      Mon Apr 12 09:14:30 1999 +0000
+++ b/distrib/notes/atari/hardware      Mon Apr 12 10:30:01 1999 +0000
@@ -1,8 +1,9 @@
-.\"    $NetBSD: hardware,v 1.10 1999/01/13 07:30:03 ross Exp $ 
+.\"    $NetBSD: hardware,v 1.10.2.1 1999/04/12 10:30:01 leo Exp $      
 NetBSD/atari \*V runs on a TT030, Falcon and Hades. An FPU is not required.
-The minimum amount of RAM required is 4Mb. On the Hades, only the et4000-PCI
-card is supported in the _VER release. When another video card is present,
-you can use NetBSD only with a serial console.
+The minimum amount of RAM required is 4Mb. On the Hades, only the Tseng PCI
+VGA cards (et4000/et6000/et6100) are supported in the \*V release. When
+an unsupported video card is present, you can use NetBSD with a serial console
+only.
 .Pp
 Here is a table of recommended HD partition sizes for a full install:
 .Bd -literal -offset indent
@@ -50,7 +51,7 @@
 .      It
 The atari mouse
 .      It
-A 3-button mouse
+A 3-button mouse (see build description in the FAQ!)
 .      It
 The parallel printer
 .      It
@@ -60,7 +61,13 @@
 .      It
 The serial interface on the first 68901 UART (modem1)
 .      It
-ET4000-PCI (VGA) on the Hades.
+ET4000/ET6000/ET6100-PCI (VGA) on the Hades.
+.      It
+ISA-bus devices (Hades only)
+.      Bl -hyphen
+.              It
+Teles S0/16.3-ISA ISDN adapter (with I4B)
+.      El
 .El
 .Pp
 If it's not on this list, there is no support for it in this release.
diff -r e89fb3664832 -r a41e2efef32e distrib/notes/atari/xfer
--- a/distrib/notes/atari/xfer  Mon Apr 12 09:14:30 1999 +0000
+++ b/distrib/notes/atari/xfer  Mon Apr 12 10:30:01 1999 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: xfer,v 1.10 1999/01/13 07:30:04 ross Exp $     
+.\"    $NetBSD: xfer,v 1.10.2.1 1999/04/12 10:30:01 leo Exp $  
 Installation is supported from several media types, including:
 .Pp
 .Bl -bullet -compact
@@ -18,11 +18,11 @@
 the command dd(1) to write the raw floppy images (.fs files) to
 the disk. As an example, to write the first part of the miniroot filesystem
 onto a 720KB floppy in fd0 use:
-.Dl dd if=miniroot.fs.1 of=/dev/rfd0b bs=9b
+.Dl dd\ if=miniroot.fs.1\ of=/dev/rfd0b\ bs=9b
 .Pp
 If you are using TOS to make the floppies, grab the 'rawwrite' utility
 from the "atari/utils" directory and issue the command:
-.Dl rawwrite miniroot.fs
+.Dl rawwrite\ boot.fs
 .Pp
 This will create the boot-floppy on the floppy in drive a. The floppies
 should be pre-formatted on 720Kb/1.44Mb for both the 'dd' and 'rawwrite'