Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/evbarm move arch/iyonix into evbarm - it's got less...
details: https://anonhg.NetBSD.org/src/rev/a304e12f5a45
branches: trunk
changeset: 448945:a304e12f5a45
user: macallan <macallan%NetBSD.org@localhost>
date: Thu Feb 14 21:47:52 2019 +0000
description:
move arch/iyonix into evbarm - it's got less machine specific code than most
evbarm/*...
does not quite work yet, but I don't want it to accumulate more differences
to what's in arch/iyonix
diffstat:
sys/arch/evbarm/conf/IYONIX | 423 ++++++++++++++
sys/arch/evbarm/conf/files.iyonix | 27 +
sys/arch/evbarm/conf/std.iyonix | 20 +
sys/arch/evbarm/iyonix/autoconf.c | 194 ++++++
sys/arch/evbarm/iyonix/com_obio.c | 95 +++
sys/arch/evbarm/iyonix/i80321_mainbus.c | 234 ++++++++
sys/arch/evbarm/iyonix/iyonix_machdep.c | 933 ++++++++++++++++++++++++++++++++
sys/arch/evbarm/iyonix/iyonix_pci.c | 221 +++++++
sys/arch/evbarm/iyonix/iyonixreg.h | 68 ++
sys/arch/evbarm/iyonix/iyonixvar.h | 11 +
sys/arch/evbarm/iyonix/obio.c | 144 ++++
sys/arch/evbarm/iyonix/obio_space.c | 233 +++++++
sys/arch/evbarm/iyonix/obiovar.h | 51 +
13 files changed, 2654 insertions(+), 0 deletions(-)
diffs (truncated from 2706 to 300 lines):
diff -r 24fbc7548fbd -r a304e12f5a45 sys/arch/evbarm/conf/IYONIX
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/evbarm/conf/IYONIX Thu Feb 14 21:47:52 2019 +0000
@@ -0,0 +1,423 @@
+# $NetBSD: IYONIX,v 1.1 2019/02/14 21:47:52 macallan Exp $
+#
+# GENERIC machine description file
+#
+# This machine description file is used to generate the default NetBSD
+# kernel. The generic kernel does not include all options, subsystems
+# and device drivers, but should be useful for most applications.
+#
+# The machine description file can be customised for your specific
+# machine to reduce the kernel size and improve its performance.
+#
+# For further information on compiling NetBSD kernels, see the config(8)
+# man page.
+#
+# For further information on hardware support for this architecture, see
+# the intro(4) man page. For further information about kernel options
+# for this architecture, see the options(4) man page. For an explanation
+# of each device driver in this file see the section 4 man page for the
+# device.
+
+include "arch/evbarm/conf/std.iyonix"
+
+options INCLUDE_CONFIG_FILE # embed config file in kernel binary
+
+#ident "GENERIC-$Revision: 1.1 $"
+
+maxusers 32 # estimated number of users
+
+options MSGBUFSIZE=65536
+
+# CPU options
+
+# For XScale systems
+options CPU_XSCALE_80321 # Support the XScale core
+makeoptions CPUFLAGS="-mcpu=xscale"
+
+# Architecture options
+options XSCALE_CACHE_READ_WRITE_ALLOCATE
+#options HZ=512
+makeoptions CPUFLAGS="-mcpu=xscale"
+
+# Standard system options
+
+options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
+#options NTP # NTP phase/frequency locked loop
+
+#options KTRACE # system call tracing via ktrace(1)
+
+
+#options SYSVMSG # System V-like message queues
+#options SYSVSEM # System V-like semaphores
+#options SYSVSHM # System V-like memory sharing
+
+# Device options
+
+# Console options. The default console is speed is 115200 baud.
+#options CONSPEED=9600 # Console speed
+
+# Miscellaneous kernel options
+options KTRACE # system call tracing, a la ktrace(1)
+options IRQSTATS # manage IRQ statistics
+#options SCSIVERBOSE # Verbose SCSI errors
+options PCIVERBOSE # Verbose PCI descriptions
+options MIIVERBOSE # Verbose MII autoconfuration messages
+#options PCI_CONFIG_DUMP # verbosely dump PCI config space
+
+options USERCONF # userconf(4) support
+#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
+#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
+
+# Development and Debugging options
+
+# Alternate buffer queue strategies for better responsiveness under high
+# disk I/O load.
+#options BUFQ_READPRIO
+#options BUFQ_PRIOCSCAN
+
+# Diagnostic/debugging support options
+#options DIAGNOSTIC # expensive kernel consistency checks
+#options DEBUG # expensive debugging checks/support
+options DDB # in-kernel debugger
+#options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
+options DDB_HISTORY_SIZE=512 # enable history editing in DDB
+#options DDB_KEYCODE=0x40
+#options KGDB # remote debugger
+#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
+#makeoptions DEBUG="-g" # compile full symbol table
+makeoptions COPY_SYMTAB=1
+#options PMAP_DEBUG # Enable pmap_debug_level code
+#options VERBOSE_INIT_ARM # verbose bootstraping messages
+
+#options PMAP_INCLUDE_PTE_SYNC
+#options LOCKDEBUG
+
+
+# Compatibility options
+
+include "conf/compat_netbsd70.config"
+options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
+
+# File systems
+file-system FFS # UFS
+#file-system EXT2FS # second extended file system (linux)
+#file-system LFS # log-structured file system
+#file-system MFS # memory file system
+file-system NFS # Network File System client
+#file-system NTFS # Windows/NT file system (experimental)
+file-system CD9660 # ISO 9660 + Rock Ridge file system
+file-system MSDOSFS # MS-DOS file system
+#file-system FDESC # /dev/fd
+file-system KERNFS # /kern
+#file-system NULLFS # loopback file system
+#file-system OVERLAY # overlay file system
+file-system PROCFS # /proc
+#file-system UMAPFS # NULLFS + uid and gid remapping
+#file-system UNION # union file system
+#file-system CODA # Coda File System; also needs vcoda (below)
+#file-system SMBFS # experimental - CIFS; also needs nsmb (below)
+file-system PTYFS # /dev/ptm support
+file-system TMPFS # Efficient memory file-system
+#file-system UDF # experimental - OSTA UDF CD/DVD file-system
+#file-system HFS # experimental - Apple HFS+ (read-only)
+file-system FILECORE # Acorn filecore file system
+
+# File system options
+#options QUOTA # legacy UFS quotas
+#options QUOTA2 # new, in-filesystem UFS quotas
+#options FFS_EI # FFS Endian Independent support
+options WAPBL # File system journaling support
+# Note that UFS_DIRHASH is suspected of causing kernel memory corruption.
+# It is not recommended for general use.
+#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
+#options NFSSERVER # Network File System server
+options FFS_NO_SNAPSHOT # No FFS snapshot support
+#options UFS_EXTATTR # Extended attribute support for UFS1
+#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
+ # immutable) behave as system flags.
+
+# Networking options
+#options GATEWAY # packet forwarding
+options INET # IP + ICMP + TCP + UDP
+options INET6 # IPV6
+#options IPSEC # IP security
+#options IPSEC_DEBUG # debug for IP security
+#options MROUTING # IP multicast routing
+#options PIM # Protocol Independent Multicast
+#options NETATALK # AppleTalk networking protocols
+#options PPP_BSDCOMP # BSD-Compress compression support for PPP
+#options PPP_DEFLATE # Deflate compression support for PPP
+#options PPP_FILTER # Active filter support for PPP (requires bpf)
+#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
+
+#options ALTQ # Manipulate network interfaces' output queues
+#options ALTQ_BLUE # Stochastic Fair Blue
+#options ALTQ_CBQ # Class-Based Queueing
+#options ALTQ_CDNR # Diffserv Traffic Conditioner
+#options ALTQ_FIFOQ # First-In First-Out Queue
+#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
+#options ALTQ_HFSC # Hierarchical Fair Service Curve
+#options ALTQ_LOCALQ # Local queueing discipline
+#options ALTQ_PRIQ # Priority Queueing
+#options ALTQ_RED # Random Early Detection
+#options ALTQ_RIO # RED with IN/OUT
+#options ALTQ_WFQ # Weighted Fair Queueing
+
+
+options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
+
+options DKWEDGE_AUTODISCOVER
+options DKWEDGE_METHOD_BSDLABEL
+#options DKWEDGE_METHOD_MBR
+
+options INSECURE
+
+# Kernel root file system and dump configuration.
+#config netbsd root on ? type ?
+#config netbsd root on wd1a type ffs
+#config netbsd root on wm0 type nfs
+config netbsd root on "wedge:system/a" type ffs
+
+#
+# Device configuration
+#
+
+mainbus0 at root
+
+cpu0 at mainbus?
+
+# i80321 I/O Processor peripheral support
+iopxs* at mainbus?
+
+iopaau* at iopxs? # Application Accelerator Unit
+iopiic* at iopxs? # I2C Controller Unit(s)
+iic0 at iopiic?
+iic1 at iopiic?
+iopwdog* at iopxs? # Watchdog timer
+pci0 at iopxs? bus ? # PCI/PCI-X support
+
+# The curious can see their RAM timings.
+spdmem* at iic1 addr 0x56
+
+# onboard RTC. RISC OS starts counting years at 2000
+dsrtc0 at iic0 addr 0x68
+
+# PCI bridges
+ppb* at pci? dev ? function ? # PCI-PCI bridges
+pci* at ppb? bus ?
+# XXX 'puc's aren't really bridges, but there's no better place for them here
+#puc* at pci? dev ? function ? # PCI "universal" comm. cards
+
+#options COMCONSOLE
+
+# VGA
+#vga* at pci? dev ? function ?
+genfb* at pci? dev ? function ?
+#options GENFB_PCI_DEBUG
+#gffb* at pci? dev ? function ?
+
+# these exist but aren't configured by RISC OS
+#alipm* at pci?
+#iic* at alipm?
+
+# Display
+wsdisplay0 at wsemuldisplaydev? console 1
+wsdisplay* at wsemuldisplaydev?
+
+#options WSEMUL_SUN # sun terminal emulation
+options WSEMUL_VT100 # vt100 terminal emulation
+options WS_DEFAULT_FG=WSCOL_BLACK
+options WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
+options WS_KERNEL_FG=WSCOL_GREEN
+options WS_KERNEL_BG=WSCOL_LIGHT_WHITE
+options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
+options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
+options WSDISPLAY_COMPAT_USL # VT handling
+options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
+#options WSDISPLAY_DEFAULTSCREENS=4
+options FONT_GO_MONO12x23
+options WSDISPLAY_SCROLLSUPPORT
+options VCONS_DRAW_INTR
+options RASOPS_DEFAULT_WIDTH=100
+options RASOPS_DEFAULT_HEIGHT=30
+
+# IDE and related devices
+# PCI IDE controllers - see pciide(4) for supported hardware.
+# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
+# how to set up DMA modes for this chip. This may work, or may cause
+# a machine hang with some controllers.
+#pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
+aceride* at pci? dev ? function ? # Acer Lab IDE controllers
+mvsata* at pci? dev ? function ?
+
+# ATA (IDE) bus support
+atabus* at ata?
+#options ATADEBUG
+
+# IDE drives
+# Flags are used only with controllers that support DMA operations
+# and mode settings (e.g. some pciide controllers)
+# The lowest order four bits (rightmost digit) of the flags define the PIO
+# mode to use, the next set of four bits the DMA mode and the third set the
+# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
+# to use, and the last bit must be 1 for this setting to be used.
+# For DMA and UDMA, 0xf (1111) means 'disable'.
+# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
+# (0xc=1100, 0xa=1010, 0xf=1111)
+# 0x0000 means "use whatever the drive claims to support".
+wd* at atabus? drive ? flags 0x0000
+
+# ATAPI bus support
+atapibus* at atapi?
+
+# ATAPI devices
+# flags have the same meaning as for IDE drives.
+# XXX No DMA on IDE devices for now
+cd* at atapibus? drive ? flags 0x0ff0 # ATAPI CD-ROM drives
+sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
+st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
+uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
+
+
+# Network Interfaces
+
+# onboard ethernet
+wm* at pci? dev ? function ? # Intel 8254x gigabit
+
+# MII/PHY support
+makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
+ukphy* at mii? phy ? # generic unknown PHYs
+
+
+# USB Controller and Devices
+
+# Iyonix ships with an ehci/ohci card
+ehci* at pci? dev ? function ? # Enhanced Host Controller
+ohci* at pci? dev ? function ? # Open Host Controller
Home |
Main Index |
Thread Index |
Old Index