Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-8]: src/sys/dev/i2c Pull up following revision(s) (requested by b...
details: https://anonhg.NetBSD.org/src/rev/10a8f7fedbb3
branches: netbsd-8
changeset: 445133:10a8f7fedbb3
user: snj <snj%NetBSD.org@localhost>
date: Mon Oct 15 03:09:07 2018 +0000
description:
Pull up following revision(s) (requested by bouyer in ticket #1061):
sys/dev/i2c/gttwsi_core.c: revision 1.4-1.8 via patch
sys/dev/i2c/gttwsivar.h: revision 1.4 via patch
Use IPL_VM for bus lock so we can do i2c xfers from interrupt context
Don't sleep with IPL_VM lock held.
When initiating a transfer, if a device isn't present, we won't
get an ACK after sending the address. Check for this alternate
state and suppress the error message when it occurs.
Fixes PR kern/53356.
Bail early if gttwsi_send_start() fails in gttwsi_initiate_xfer() to
avoid unexpected state error message later (on Allwinner H5).
Expand code covered by sc->sc_mtx, to make sure an interrupt would not be
handled before the cv_timedwait_sig() call, or while polling.
Seems to fix "sunxitwi0: send STOP failed" messages frequently seen related
to axp20x0 sensors.
diffstat:
sys/dev/i2c/gttwsi_core.c | 104 ++++++++++++++++++++++++++++++++-------------
sys/dev/i2c/gttwsivar.h | 3 +-
2 files changed, 76 insertions(+), 31 deletions(-)
diffs (274 lines):
diff -r e9fe3aac568e -r 10a8f7fedbb3 sys/dev/i2c/gttwsi_core.c
--- a/sys/dev/i2c/gttwsi_core.c Sat Oct 13 17:32:32 2018 +0000
+++ b/sys/dev/i2c/gttwsi_core.c Mon Oct 15 03:09:07 2018 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: gttwsi_core.c,v 1.2 2014/11/23 13:37:27 jmcneill Exp $ */
+/* $NetBSD: gttwsi_core.c,v 1.2.12.1 2018/10/15 03:09:07 snj Exp $ */
/*
* Copyright (c) 2008 Eiji Kawauchi.
* All rights reserved.
@@ -66,7 +66,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: gttwsi_core.c,v 1.2 2014/11/23 13:37:27 jmcneill Exp $");
+__KERNEL_RCSID(0, "$NetBSD: gttwsi_core.c,v 1.2.12.1 2018/10/15 03:09:07 snj Exp $");
#include "locators.h"
#include <sys/param.h>
@@ -91,7 +91,8 @@
static int gttwsi_read_byte(void *v, uint8_t *valp, int flags);
static int gttwsi_write_byte(void *v, uint8_t val, int flags);
-static int gttwsi_wait(struct gttwsi_softc *, uint32_t, uint32_t, int);
+static int gttwsi_wait(struct gttwsi_softc *, uint32_t, uint32_t,
+ uint32_t, int);
static inline uint32_t
gttwsi_read_4(struct gttwsi_softc *sc, uint32_t reg)
@@ -133,7 +134,7 @@
sc->sc_bust = iot;
sc->sc_bush = ioh;
- mutex_init(&sc->sc_buslock, MUTEX_DEFAULT, IPL_NONE);
+ mutex_init(&sc->sc_buslock, MUTEX_DEFAULT, IPL_VM);
mutex_init(&sc->sc_mtx, MUTEX_DEFAULT, IPL_BIO);
cv_init(&sc->sc_cv, device_xname(self));
@@ -176,15 +177,15 @@
struct gttwsi_softc *sc = arg;
uint32_t val;
+ mutex_enter(&sc->sc_mtx);
val = gttwsi_read_4(sc, TWSI_CONTROL);
if (val & CONTROL_IFLG) {
gttwsi_write_4(sc, TWSI_CONTROL, val & ~CONTROL_INTEN);
- mutex_enter(&sc->sc_mtx);
- cv_signal(&sc->sc_cv);
+ cv_broadcast(&sc->sc_cv);
mutex_exit(&sc->sc_mtx);
-
return 1; /* handled */
}
+ mutex_exit(&sc->sc_mtx);
return 0;
}
@@ -195,6 +196,11 @@
struct gttwsi_softc *sc = arg;
mutex_enter(&sc->sc_buslock);
+ while (sc->sc_inuse)
+ cv_wait(&sc->sc_cv, &sc->sc_buslock);
+ sc->sc_inuse = true;
+ mutex_exit(&sc->sc_buslock);
+
return 0;
}
@@ -204,6 +210,9 @@
{
struct gttwsi_softc *sc = arg;
+ mutex_enter(&sc->sc_buslock);
+ sc->sc_inuse = false;
+ cv_broadcast(&sc->sc_cv);
mutex_exit(&sc->sc_buslock);
}
@@ -213,12 +222,14 @@
struct gttwsi_softc *sc = v;
int expect;
+ KASSERT(sc->sc_inuse);
+
if (sc->sc_started)
expect = STAT_RSCT;
else
expect = STAT_SCT;
sc->sc_started = true;
- return gttwsi_wait(sc, CONTROL_START, expect, flags);
+ return gttwsi_wait(sc, CONTROL_START, expect, 0, flags);
}
static int
@@ -228,6 +239,8 @@
int retry = TWSI_RETRY_COUNT;
uint32_t control;
+ KASSERT(sc->sc_inuse);
+
sc->sc_started = false;
/* Interrupt is not generated for STAT_NRS. */
@@ -250,16 +263,23 @@
gttwsi_initiate_xfer(void *v, i2c_addr_t addr, int flags)
{
struct gttwsi_softc *sc = v;
- uint32_t data, expect;
+ uint32_t data, expect, alt;
int error, read;
- gttwsi_send_start(v, flags);
+ KASSERT(sc->sc_inuse);
+
+ error = gttwsi_send_start(v, flags);
+ if (error)
+ return error;
read = (flags & I2C_F_READ) != 0;
- if (read)
+ if (read) {
expect = STAT_ARBT_AR;
- else
+ alt = STAT_ARBT_ANR;
+ } else {
expect = STAT_AWBT_AR;
+ alt = STAT_AWBT_ANR;
+ }
/*
* First byte contains whether this xfer is a read or write.
@@ -272,23 +292,26 @@
*/
data |= 0xf0 | ((addr & 0x300) >> 7);
gttwsi_write_4(sc, TWSI_DATA, data);
- error = gttwsi_wait(sc, 0, expect, flags);
+ error = gttwsi_wait(sc, 0, expect, alt, flags);
if (error)
return error;
/*
* The first address byte has been sent, now to send
* the second one.
*/
- if (read)
+ if (read) {
expect = STAT_SARBT_AR;
- else
+ alt = STAT_SARBT_ANR;
+ } else {
expect = STAT_SAWBT_AR;
+ alt = STAT_SAWBT_ANR;
+ }
data = (uint8_t)addr;
} else
data |= (addr << 1);
gttwsi_write_4(sc, TWSI_DATA, data);
- return gttwsi_wait(sc, 0, expect, flags);
+ return gttwsi_wait(sc, 0, expect, alt, flags);
}
static int
@@ -297,10 +320,12 @@
struct gttwsi_softc *sc = v;
int error;
+ KASSERT(sc->sc_inuse);
+
if (flags & I2C_F_LAST)
- error = gttwsi_wait(sc, 0, STAT_MRRD_ANT, flags);
+ error = gttwsi_wait(sc, 0, STAT_MRRD_ANT, 0, flags);
else
- error = gttwsi_wait(sc, CONTROL_ACK, STAT_MRRD_AT, flags);
+ error = gttwsi_wait(sc, CONTROL_ACK, STAT_MRRD_AT, 0, flags);
if (!error)
*valp = gttwsi_read_4(sc, TWSI_DATA);
if ((flags & (I2C_F_LAST | I2C_F_STOP)) == (I2C_F_LAST | I2C_F_STOP))
@@ -314,8 +339,10 @@
struct gttwsi_softc *sc = v;
int error;
+ KASSERT(sc->sc_inuse);
+
gttwsi_write_4(sc, TWSI_DATA, val);
- error = gttwsi_wait(sc, 0, STAT_MTDB_AR, flags);
+ error = gttwsi_wait(sc, 0, STAT_MTDB_AR, 0, flags);
if (flags & I2C_F_STOP)
gttwsi_send_stop(sc, flags);
return error;
@@ -323,16 +350,19 @@
static int
gttwsi_wait(struct gttwsi_softc *sc, uint32_t control, uint32_t expect,
- int flags)
+ uint32_t alt, int flags)
{
uint32_t status;
int timo, error = 0;
+ KASSERT(sc->sc_inuse);
+
DELAY(5);
if (!(flags & I2C_F_POLL))
control |= CONTROL_INTEN;
if (sc->sc_iflg_rwc)
control |= CONTROL_IFLG;
+ mutex_enter(&sc->sc_mtx);
gttwsi_write_4(sc, TWSI_CONTROL, control | CONTROL_TWSIEN);
timo = 0;
@@ -341,22 +371,36 @@
if (control & CONTROL_IFLG)
break;
if (!(flags & I2C_F_POLL)) {
- mutex_enter(&sc->sc_mtx);
error = cv_timedwait_sig(&sc->sc_cv, &sc->sc_mtx, hz);
- mutex_exit(&sc->sc_mtx);
if (error)
- return error;
+ break;
+ } else {
+ DELAY(TWSI_RETRY_DELAY);
+ if (timo++ > 1000000) /* 1sec */
+ break;
}
- DELAY(TWSI_RETRY_DELAY);
- if (timo++ > 1000000) /* 1sec */
- break;
}
-
+ if ((control & CONTROL_IFLG) == 0) {
+ aprint_error_dev(sc->sc_dev,
+ "gttwsi_wait(): timeout, control=0x%x\n", control);
+ error = EWOULDBLOCK;
+ goto end;
+ }
status = gttwsi_read_4(sc, TWSI_STATUS);
if (status != expect) {
- aprint_error_dev(sc->sc_dev,
- "unexpected status 0x%x: expect 0x%x\n", status, expect);
- return EIO;
+ /*
+ * In the case of probing for a device, we are expecting
+ * 2 different status codes: the ACK case (device exists),
+ * or the NACK case (device does not exist). We don't
+ * need to report an error in the later case.
+ */
+ if (alt != 0 && status != alt)
+ aprint_error_dev(sc->sc_dev,
+ "unexpected status 0x%x: expect 0x%x\n", status,
+ expect);
+ error = EIO;
}
+end:
+ mutex_exit(&sc->sc_mtx);
return error;
}
diff -r e9fe3aac568e -r 10a8f7fedbb3 sys/dev/i2c/gttwsivar.h
--- a/sys/dev/i2c/gttwsivar.h Sat Oct 13 17:32:32 2018 +0000
+++ b/sys/dev/i2c/gttwsivar.h Mon Oct 15 03:09:07 2018 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: gttwsivar.h,v 1.2 2014/11/23 13:37:27 jmcneill Exp $ */
+/* $NetBSD: gttwsivar.h,v 1.2.12.1 2018/10/15 03:09:07 snj Exp $ */
/*
* Copyright (c) 2008 Eiji Kawauchi.
* All rights reserved.
@@ -86,6 +86,7 @@
struct i2c_controller sc_i2c;
kmutex_t sc_buslock;
kmutex_t sc_mtx;
+ bool sc_inuse;
kcondvar_t sc_cv;
bool sc_iflg_rwc;
Home |
Main Index |
Thread Index |
Old Index