Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/external/bsd/acpica/dist -------------------------------...
details: https://anonhg.NetBSD.org/src/rev/7e84bf7f90fa
branches: trunk
changeset: 363965:7e84bf7f90fa
user: christos <christos%NetBSD.org@localhost>
date: Sat Aug 18 09:10:19 2018 +0000
description:
----------------------------------------
10 August 2018. Summary of changes for version 20180810:
1) ACPICA kernel-resident subsystem:
Initial ACPI table loading: Attempt to continue loading ACPI tables
regardless of malformed AML. Since migrating table initialization to the
new module-level code support, the AML interpreter rejected tables upon
any ACPI error encountered during table load. This is a problem because
non-serious ACPI errors during table load do not necessarily mean that
the entire definition block (DSDT or SSDT) is invalid. This change
improves the table loading by ignoring some types of errors that can be
generated by incorrect AML. This can range from object type errors, scope
errors, and index errors.
Suspend/Resume support: Update to stop unconditionally clearing ACPI IRQs
during suspend/resume. The status of ACPI events is no longer cleared
when entering the ACPI S5 system state (power off) which caused some
systems to power up immediately after turning off power in certain
situations. This was a functional regression. It was fixed by clearing
the status of all ACPI events again when entering S5 (for system-wide
suspend or hibernation the clearing of the status of all events is not
desirable, as it might cause the kernel to miss wakeup events sometimes).
Rafael Wysocki.
2) iASL Compiler/Disassembler and Tools:
AcpiExec: Enhanced the -fi option (Namespace initialization file). Field
elements listed in the initialization file were previously initialized
after the table load and before executing module-level code blocks.
Recent changes in the module-level code support means that the table load
becomes a large control method execution. If fields are used within
module-level code and we are executing with the -fi option, the
initialization values were used to initialize the namespace object(s)
only after the table was finished loading. This change Provides an early
initialization of objects specified in the initialization file so that
field unit values are populated during the table load (not after the
load).
AcpiExec: Fixed a small memory leak regression that could result in
warnings during exit of the utility. These warnings were similar to
these:
0002D690 Length 0x0006 nsnames-0502 [Not a Descriptor - too small]
0002CD70 Length 0x002C utcache-0453 [Operand] Integer RefCount 0x0001
----------------------------------------
29 June 2018. Summary of changes for version 20180629:
1) iASL Compiler/Disassembler and Tools:
iASL: Fixed a regression related to the use of the ASL External
statement. Error checking for the use of the External() statement has
been relaxed. Previously, a restriction on the use of External meant that
the referenced named object was required to be defined in a different
table (an SSDT). Thus it would be an error to declare an object as an
external and then define the same named object in the same table. For
example:
DefinitionBlock (...)
{
External (DEV1)
Device (DEV1){...} // This was an error
}
However, this behavior has caused regressions in some existing ASL code,
because there is code that depends on named objects and externals (with
the same name) being declared in the same table. This change will allow
the ASL code above to compile without errors or warnings.
iASL: Implemented ASL language extensions for four operators to make some
of their arguments optional instead of required:
1) Field (RegionName, AccessType, LockRule, UpdateRule)
2) BankField (RegionName, BankName, BankValue,
AccessType, LockRule, UpdateRule)
3) IndexField (IndexName, DataName,
AccessType, LockRule, UpdateRule)
For the Field operators above, the AccessType, LockRule, and UpdateRule
are now optional arguments. The default values are:
AccessType: AnyAcc
LockRule: NoLock
UpdateRule: Preserve
4) Mutex (MutexName, SyncLevel)
For this operator, the SyncLevel argument is now optional. This argument
is rarely used in any meaningful way by ASL code, and thus it makes sense
to make it optional. The default value is:
SyncLevel: 0
iASL: Attempted use of the ASL Unload() operator now results in the
following warning:
"Unload is not supported by all operating systems"
This is in fact very true, and the Unload operator may be completely
deprecated in the near future.
AcpiExec: Fixed a regression for the -fi option (Namespace initialization
file. Recent changes in the ACPICA module-level code support altered the
table load/initialization sequence . This means that the table load has
become a large method execution of the table itself. If Operation Region
Fields are used within any module-level code and the -fi option was
specified, the initialization values were populated only after the table
had completely finished loading (and thus the module-level code had
already been executed). This change moves the initialization of objects
listed in the initialization file to before the table is executed as a
method. Field unit values are now initialized before the table execution
is performed.
----------------------------------------
31 May 2018. Summary of changes for version 20180531:
1) ACPICA kernel-resident Subsystem:
Implemented additional support to help ensure that a DSDT or SSDT is
fully loaded even if errors are incurred during the load. The majority of
the problems that are seen is the failure of individual AML operators
that occur during execution of any module-level code (MLC) existing in
the table. This support adds a mechanism to abort the current ASL
statement (AML opcode), emit an error message, and to simply move on to
the next opcode -- instead of aborting the entire table load. This is
different than the execution of a control method where the entire method
is aborted upon any error. The goal is to perform a very "best effort" to
load the ACPI tables. The most common MLC errors that have been seen in
the field are direct references to unresolved ASL/AML symbols (referenced
directly without the use of the CondRefOf operator to validate the
symbol). This new ACPICA behavior is now compatible with other ACPI
implementations.
Interpreter: The Unload AML operator is no longer supported for the
reasons below. An AE_NOT_IMPLEMENTED exception is returned.
1) A correct implementation on at least some hosts may not be possible.
2) Other ACPI implementations do not correctly/fully support it.
3) It requires host device driver support which is not known to exist.
(To properly support namespace unload out from underneath.)
4) This AML operator has never been seen in the field.
Parser: Added a debug option to dump AML parse sub-trees as they are
being executed. Used with ACPI_DEBUG_PRINT, the enabling debug level is
ACPI_DB_PARSE_TREES.
Debugger: Reduced the verbosity for errors incurred during table load and
module-level code execution.
Completed an investigation into adding a namespace node "owner list"
instead of the current "owner ID" associated with namespace nodes. This
list would link together all nodes that are owned by an individual
control method. The purpose would be to enhance control method execution
by speeding up cleanup during method exit (all namespace nodes created by
a method are deleted upon method termination.) Currently, the entire
namespace must be searched for matching owner IDs if (and only if) the
method creates named objects outside of the local scope. However, by far
the most common case is that methods create objects locally, not outside
the method scope. There is already an ACPICA optimization in place that
only searches the entire namespace in the rare case of a method creating
objects elsewhere in the namespace. Therefore, it is felt that the
overhead of adding an additional pointer to each namespace node to
implement the owner list makes this feature unnecessary.
2) iASL Compiler/Disassembler and Tools:
iASL, Disassembler, and Template generator: Implemented support for
Revision D of the IORT table. Adds a new subtable that is used to specify
SMMUv3 PMCGs. rmurphy-arm.
Disassembler: Restored correct table header validation for the "special"
ACPI tables -- RSDP and FACS. These tables do not contain a standard ACPI
table header and must be special-cased. This was a regression that has
been present for apparently a long time.
AcpiExec: Reduced verbosity of the local exception handler implemented
within acpiexec. This handler is invoked by ACPICA upon any exceptions
generated during control method execution. A new option was added: -vh
restores the original verbosity level if desired.
AcpiExec: Changed the default base from decimal to hex for the -x option
(set debug level). This simplifies the use of this option and matches the
behavior of the corresponding iASL -x option.
AcpiExec: Restored a force-exit on multiple control-c (sigint)
interrupts. This allows program termination even if other issues cause
the control-c to fail.
ASL test suite (ASLTS): Added tests for the recently implemented package
element resolution mechanism that allows forward references to named
objects from individual package elements (this mechanism provides
compatibility with other ACPI implementations.)
----------------------------------------
8 May 2018. Summary of changes for version 20180508:
1) ACPICA kernel-resident subsystem:
Completed the new (recently deployed) package resolution mechanism for
the Load and LoadTable ASL/AML operators. This fixes a regression that
was introduced in version 20180209 that could result in an
AE_AML_INTERNAL exception during the loading of a dynamic ACPI/AML table
(SSDT) that contains package objects.
2) iASL Compiler/Disassembler and Tools:
AcpiDump and AcpiXtract: Implemented support for ACPI tables larger than
1 MB. This change allows for table offsets within the acpidump file to be
up to 8 characters. These changes are backwards compatible with existing
acpidump files.
diffstat:
sys/external/bsd/acpica/dist/changes.txt | 209 +++++++++++++
sys/external/bsd/acpica/dist/common/acfileio.c | 23 +-
sys/external/bsd/acpica/dist/common/dmextern.c | 2 +-
sys/external/bsd/acpica/dist/common/dmtbdump2.c | 6 +
sys/external/bsd/acpica/dist/common/dmtbinfo2.c | 17 +-
sys/external/bsd/acpica/dist/compiler/aslglobal.h | 7 +-
sys/external/bsd/acpica/dist/compiler/aslhelpers.y | 32 +
sys/external/bsd/acpica/dist/compiler/aslmain.c | 15 +-
sys/external/bsd/acpica/dist/compiler/aslmessages.c | 3 +-
sys/external/bsd/acpica/dist/compiler/aslmessages.h | 1 +
sys/external/bsd/acpica/dist/compiler/aslparser.y | 2 +-
sys/external/bsd/acpica/dist/compiler/aslprimaries.y | 28 +-
sys/external/bsd/acpica/dist/compiler/asltransform.c | 5 +
sys/external/bsd/acpica/dist/compiler/asltypes.y | 4 +
sys/external/bsd/acpica/dist/compiler/dttable1.c | 13 +
sys/external/bsd/acpica/dist/compiler/dttemplate.h | 57 ++-
sys/external/bsd/acpica/dist/debugger/dbobject.c | 26 +-
sys/external/bsd/acpica/dist/debugger/dbxface.c | 10 +-
sys/external/bsd/acpica/dist/dispatcher/dsdebug.c | 10 +-
sys/external/bsd/acpica/dist/dispatcher/dsfield.c | 26 +
sys/external/bsd/acpica/dist/include/acconfig.h | 2 +-
sys/external/bsd/acpica/dist/include/actbinfo.h | 1 +
sys/external/bsd/acpica/dist/include/actbl2.h | 26 +-
sys/external/bsd/acpica/dist/namespace/nssearch.c | 1 -
sys/external/bsd/acpica/dist/parser/psloop.c | 69 ++++
sys/external/bsd/acpica/dist/parser/psobject.c | 29 +
sys/external/bsd/acpica/dist/parser/pswalk.c | 29 +-
sys/external/bsd/acpica/dist/tools/acpibin/abmain.c | 1 -
sys/external/bsd/acpica/dist/tools/acpiexec/aecommon.h | 19 +-
sys/external/bsd/acpica/dist/tools/acpiexec/aeexception.c | 60 ++-
sys/external/bsd/acpica/dist/tools/acpiexec/aeinitfile.c | 167 ++++++---
sys/external/bsd/acpica/dist/tools/acpiexec/aemain.c | 29 +-
sys/external/bsd/acpica/dist/tools/acpiexec/aeregion.c | 8 +-
sys/external/bsd/acpica/dist/tools/acpisrc/asconvrt.c | 1 -
sys/external/bsd/acpica/dist/tools/acpisrc/astable.c | 1 +
sys/external/bsd/acpica/dist/tools/acpixtract/acpixtract.h | 5 +-
sys/external/bsd/acpica/dist/tools/acpixtract/axutils.c | 10 +-
sys/external/bsd/acpica/dist/utilities/utbuffer.c | 4 +-
sys/external/bsd/acpica/dist/utilities/utdelete.c | 7 +-
sys/external/bsd/acpica/dist/utilities/uterror.c | 4 +-
sys/external/bsd/acpica/dist/utilities/utstrsuppt.c | 30 +-
sys/external/bsd/acpica/dist/utilities/utstrtoul64.c | 2 +-
42 files changed, 804 insertions(+), 197 deletions(-)
diffs (truncated from 1944 to 300 lines):
diff -r 7de03441d126 -r 7e84bf7f90fa sys/external/bsd/acpica/dist/changes.txt
--- a/sys/external/bsd/acpica/dist/changes.txt Sat Aug 18 09:00:28 2018 +0000
+++ b/sys/external/bsd/acpica/dist/changes.txt Sat Aug 18 09:10:19 2018 +0000
@@ -1,4 +1,213 @@
----------------------------------------
+10 August 2018. Summary of changes for version 20180810:
+
+
+1) ACPICA kernel-resident subsystem:
+
+Initial ACPI table loading: Attempt to continue loading ACPI tables
+regardless of malformed AML. Since migrating table initialization to the
+new module-level code support, the AML interpreter rejected tables upon
+any ACPI error encountered during table load. This is a problem because
+non-serious ACPI errors during table load do not necessarily mean that
+the entire definition block (DSDT or SSDT) is invalid. This change
+improves the table loading by ignoring some types of errors that can be
+generated by incorrect AML. This can range from object type errors, scope
+errors, and index errors.
+
+Suspend/Resume support: Update to stop unconditionally clearing ACPI IRQs
+during suspend/resume. The status of ACPI events is no longer cleared
+when entering the ACPI S5 system state (power off) which caused some
+systems to power up immediately after turning off power in certain
+situations. This was a functional regression. It was fixed by clearing
+the status of all ACPI events again when entering S5 (for system-wide
+suspend or hibernation the clearing of the status of all events is not
+desirable, as it might cause the kernel to miss wakeup events sometimes).
+Rafael Wysocki.
+
+
+2) iASL Compiler/Disassembler and Tools:
+
+AcpiExec: Enhanced the -fi option (Namespace initialization file). Field
+elements listed in the initialization file were previously initialized
+after the table load and before executing module-level code blocks.
+Recent changes in the module-level code support means that the table load
+becomes a large control method execution. If fields are used within
+module-level code and we are executing with the -fi option, the
+initialization values were used to initialize the namespace object(s)
+only after the table was finished loading. This change Provides an early
+initialization of objects specified in the initialization file so that
+field unit values are populated during the table load (not after the
+load).
+
+AcpiExec: Fixed a small memory leak regression that could result in
+warnings during exit of the utility. These warnings were similar to
+these:
+ 0002D690 Length 0x0006 nsnames-0502 [Not a Descriptor - too small]
+ 0002CD70 Length 0x002C utcache-0453 [Operand] Integer RefCount 0x0001
+
+----------------------------------------
+29 June 2018. Summary of changes for version 20180629:
+
+
+1) iASL Compiler/Disassembler and Tools:
+
+iASL: Fixed a regression related to the use of the ASL External
+statement. Error checking for the use of the External() statement has
+been relaxed. Previously, a restriction on the use of External meant that
+the referenced named object was required to be defined in a different
+table (an SSDT). Thus it would be an error to declare an object as an
+external and then define the same named object in the same table. For
+example:
+ DefinitionBlock (...)
+ {
+ External (DEV1)
+ Device (DEV1){...} // This was an error
+ }
+However, this behavior has caused regressions in some existing ASL code,
+because there is code that depends on named objects and externals (with
+the same name) being declared in the same table. This change will allow
+the ASL code above to compile without errors or warnings.
+
+iASL: Implemented ASL language extensions for four operators to make some
+of their arguments optional instead of required:
+ 1) Field (RegionName, AccessType, LockRule, UpdateRule)
+ 2) BankField (RegionName, BankName, BankValue,
+ AccessType, LockRule, UpdateRule)
+ 3) IndexField (IndexName, DataName,
+ AccessType, LockRule, UpdateRule)
+For the Field operators above, the AccessType, LockRule, and UpdateRule
+are now optional arguments. The default values are:
+ AccessType: AnyAcc
+ LockRule: NoLock
+ UpdateRule: Preserve
+ 4) Mutex (MutexName, SyncLevel)
+For this operator, the SyncLevel argument is now optional. This argument
+is rarely used in any meaningful way by ASL code, and thus it makes sense
+to make it optional. The default value is:
+ SyncLevel: 0
+
+iASL: Attempted use of the ASL Unload() operator now results in the
+following warning:
+ "Unload is not supported by all operating systems"
+This is in fact very true, and the Unload operator may be completely
+deprecated in the near future.
+
+AcpiExec: Fixed a regression for the -fi option (Namespace initialization
+file. Recent changes in the ACPICA module-level code support altered the
+table load/initialization sequence . This means that the table load has
+become a large method execution of the table itself. If Operation Region
+Fields are used within any module-level code and the -fi option was
+specified, the initialization values were populated only after the table
+had completely finished loading (and thus the module-level code had
+already been executed). This change moves the initialization of objects
+listed in the initialization file to before the table is executed as a
+method. Field unit values are now initialized before the table execution
+is performed.
+
+----------------------------------------
+31 May 2018. Summary of changes for version 20180531:
+
+
+1) ACPICA kernel-resident Subsystem:
+
+Implemented additional support to help ensure that a DSDT or SSDT is
+fully loaded even if errors are incurred during the load. The majority of
+the problems that are seen is the failure of individual AML operators
+that occur during execution of any module-level code (MLC) existing in
+the table. This support adds a mechanism to abort the current ASL
+statement (AML opcode), emit an error message, and to simply move on to
+the next opcode -- instead of aborting the entire table load. This is
+different than the execution of a control method where the entire method
+is aborted upon any error. The goal is to perform a very "best effort" to
+load the ACPI tables. The most common MLC errors that have been seen in
+the field are direct references to unresolved ASL/AML symbols (referenced
+directly without the use of the CondRefOf operator to validate the
+symbol). This new ACPICA behavior is now compatible with other ACPI
+implementations.
+
+Interpreter: The Unload AML operator is no longer supported for the
+reasons below. An AE_NOT_IMPLEMENTED exception is returned.
+1) A correct implementation on at least some hosts may not be possible.
+2) Other ACPI implementations do not correctly/fully support it.
+3) It requires host device driver support which is not known to exist.
+ (To properly support namespace unload out from underneath.)
+4) This AML operator has never been seen in the field.
+
+Parser: Added a debug option to dump AML parse sub-trees as they are
+being executed. Used with ACPI_DEBUG_PRINT, the enabling debug level is
+ACPI_DB_PARSE_TREES.
+
+Debugger: Reduced the verbosity for errors incurred during table load and
+module-level code execution.
+
+Completed an investigation into adding a namespace node "owner list"
+instead of the current "owner ID" associated with namespace nodes. This
+list would link together all nodes that are owned by an individual
+control method. The purpose would be to enhance control method execution
+by speeding up cleanup during method exit (all namespace nodes created by
+a method are deleted upon method termination.) Currently, the entire
+namespace must be searched for matching owner IDs if (and only if) the
+method creates named objects outside of the local scope. However, by far
+the most common case is that methods create objects locally, not outside
+the method scope. There is already an ACPICA optimization in place that
+only searches the entire namespace in the rare case of a method creating
+objects elsewhere in the namespace. Therefore, it is felt that the
+overhead of adding an additional pointer to each namespace node to
+implement the owner list makes this feature unnecessary.
+
+
+2) iASL Compiler/Disassembler and Tools:
+
+iASL, Disassembler, and Template generator: Implemented support for
+Revision D of the IORT table. Adds a new subtable that is used to specify
+SMMUv3 PMCGs. rmurphy-arm.
+
+Disassembler: Restored correct table header validation for the "special"
+ACPI tables -- RSDP and FACS. These tables do not contain a standard ACPI
+table header and must be special-cased. This was a regression that has
+been present for apparently a long time.
+
+AcpiExec: Reduced verbosity of the local exception handler implemented
+within acpiexec. This handler is invoked by ACPICA upon any exceptions
+generated during control method execution. A new option was added: -vh
+restores the original verbosity level if desired.
+
+AcpiExec: Changed the default base from decimal to hex for the -x option
+(set debug level). This simplifies the use of this option and matches the
+behavior of the corresponding iASL -x option.
+
+AcpiExec: Restored a force-exit on multiple control-c (sigint)
+interrupts. This allows program termination even if other issues cause
+the control-c to fail.
+
+ASL test suite (ASLTS): Added tests for the recently implemented package
+element resolution mechanism that allows forward references to named
+objects from individual package elements (this mechanism provides
+compatibility with other ACPI implementations.)
+
+
+----------------------------------------
+8 May 2018. Summary of changes for version 20180508:
+
+
+1) ACPICA kernel-resident subsystem:
+
+Completed the new (recently deployed) package resolution mechanism for
+the Load and LoadTable ASL/AML operators. This fixes a regression that
+was introduced in version 20180209 that could result in an
+AE_AML_INTERNAL exception during the loading of a dynamic ACPI/AML table
+(SSDT) that contains package objects.
+
+
+2) iASL Compiler/Disassembler and Tools:
+
+AcpiDump and AcpiXtract: Implemented support for ACPI tables larger than
+1 MB. This change allows for table offsets within the acpidump file to be
+up to 8 characters. These changes are backwards compatible with existing
+acpidump files.
+
+
+----------------------------------------
27 April 2018. Summary of changes for version 20180427:
diff -r 7de03441d126 -r 7e84bf7f90fa sys/external/bsd/acpica/dist/common/acfileio.c
--- a/sys/external/bsd/acpica/dist/common/acfileio.c Sat Aug 18 09:00:28 2018 +0000
+++ b/sys/external/bsd/acpica/dist/common/acfileio.c Sat Aug 18 09:10:19 2018 +0000
@@ -293,16 +293,16 @@
return (AE_CTRL_TERMINATE);
}
- /* Validate the table signature/header (limited ASCII chars) */
-
- Status = AcValidateTableHeader (File, TableOffset);
- if (ACPI_FAILURE (Status))
- {
- return (Status);
- }
-
if (GetOnlyAmlTables)
{
+ /* Validate the table signature/header (limited ASCII chars) */
+
+ Status = AcValidateTableHeader (File, TableOffset);
+ if (ACPI_FAILURE (Status))
+ {
+ return (Status);
+ }
+
/*
* Table must be an AML table (DSDT/SSDT).
* Used for iASL -e option only.
@@ -330,7 +330,12 @@
fseek (File, TableOffset, SEEK_SET);
Count = fread (Table, 1, TableHeader.Length, File);
- if (Count != (INT32) TableHeader.Length)
+
+ /*
+ * Checks for data table headers happen later in the execution. Only verify
+ * for Aml tables at this point in the code.
+ */
+ if (GetOnlyAmlTables && Count != (INT32) TableHeader.Length)
{
Status = AE_ERROR;
goto ErrorExit;
diff -r 7de03441d126 -r 7e84bf7f90fa sys/external/bsd/acpica/dist/common/dmextern.c
--- a/sys/external/bsd/acpica/dist/common/dmextern.c Sat Aug 18 09:00:28 2018 +0000
+++ b/sys/external/bsd/acpica/dist/common/dmextern.c Sat Aug 18 09:10:19 2018 +0000
@@ -430,7 +430,7 @@
/* Each line defines a method */
- while (fgets (StringBuffer, ASL_MSG_BUFFER_SIZE, ExternalRefFile))
+ while (fgets (StringBuffer, ASL_STRING_BUFFER_SIZE, ExternalRefFile))
{
Token = strtok (StringBuffer, METHOD_SEPARATORS); /* "External" */
if (!Token)
diff -r 7de03441d126 -r 7e84bf7f90fa sys/external/bsd/acpica/dist/common/dmtbdump2.c
--- a/sys/external/bsd/acpica/dist/common/dmtbdump2.c Sat Aug 18 09:00:28 2018 +0000
+++ b/sys/external/bsd/acpica/dist/common/dmtbdump2.c Sat Aug 18 09:10:19 2018 +0000
@@ -157,6 +157,12 @@
Length = IortNode->Length - NodeOffset;
break;
+ case ACPI_IORT_NODE_PMCG:
+
+ InfoTable = AcpiDmTableInfoIort5;
+ Length = IortNode->Length - NodeOffset;
+ break;
+
default:
AcpiOsPrintf ("\n**** Unknown IORT node type 0x%X\n",
diff -r 7de03441d126 -r 7e84bf7f90fa sys/external/bsd/acpica/dist/common/dmtbinfo2.c
--- a/sys/external/bsd/acpica/dist/common/dmtbinfo2.c Sat Aug 18 09:00:28 2018 +0000
+++ b/sys/external/bsd/acpica/dist/common/dmtbinfo2.c Sat Aug 18 09:10:19 2018 +0000
@@ -182,6 +182,8 @@
{ACPI_DMT_IORTMEM, ACPI_IORT2_OFFSET (MemoryProperties), "Memory Properties", 0},
{ACPI_DMT_UINT32, ACPI_IORT2_OFFSET (AtsAttribute), "ATS Attribute", 0},
{ACPI_DMT_UINT32, ACPI_IORT2_OFFSET (PciSegmentNumber), "PCI Segment Number", 0},
+ {ACPI_DMT_UINT8, ACPI_IORT2_OFFSET (MemoryAddressLimit), "Memory Size Limit", 0},
+ {ACPI_DMT_UINT24, ACPI_IORT2_OFFSET (Reserved[0]), "Reserved", 0},
ACPI_DMT_TERMINATOR
};
@@ -242,13 +244,22 @@
Home |
Main Index |
Thread Index |
Old Index