Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/arm/omap Support OMAP 4430. But ADMA2 don't workin...
details: https://anonhg.NetBSD.org/src/rev/9284e4b3c2ce
branches: trunk
changeset: 346821:9284e4b3c2ce
user: kiyohara <kiyohara%NetBSD.org@localhost>
date: Thu Aug 04 07:14:50 2016 +0000
description:
Support OMAP 4430. But ADMA2 don't working yet.
tested on Gumstix DuoVero.
diffstat:
sys/arch/arm/omap/omap3_sdhc.c | 157 +++++++++++++++++++++++-------------
sys/arch/arm/omap/omap3_sdmmcreg.h | 28 +++++-
2 files changed, 126 insertions(+), 59 deletions(-)
diffs (truncated from 350 to 300 lines):
diff -r a11cdaa939af -r 9284e4b3c2ce sys/arch/arm/omap/omap3_sdhc.c
--- a/sys/arch/arm/omap/omap3_sdhc.c Thu Aug 04 07:09:15 2016 +0000
+++ b/sys/arch/arm/omap/omap3_sdhc.c Thu Aug 04 07:14:50 2016 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: omap3_sdhc.c,v 1.21 2016/07/04 15:45:37 kiyohara Exp $ */
+/* $NetBSD: omap3_sdhc.c,v 1.22 2016/08/04 07:14:50 kiyohara Exp $ */
/*-
* Copyright (c) 2011 The NetBSD Foundation, Inc.
* All rights reserved.
@@ -29,7 +29,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: omap3_sdhc.c,v 1.21 2016/07/04 15:45:37 kiyohara Exp $");
+__KERNEL_RCSID(0, "$NetBSD: omap3_sdhc.c,v 1.22 2016/08/04 07:14:50 kiyohara Exp $");
#include "opt_omap.h"
#include "edma.h"
@@ -87,7 +87,6 @@
static int obiosdhc_detach(device_t, int);
static int obiosdhc_bus_width(struct sdhc_softc *, int);
-static int obiosdhc_bus_clock(struct sdhc_softc *, int);
static int obiosdhc_rod(struct sdhc_softc *, int);
static int obiosdhc_write_protect(struct sdhc_softc *);
static int obiosdhc_card_detect(struct sdhc_softc *);
@@ -96,6 +95,7 @@
struct sdhc_softc sc;
bus_space_tag_t sc_bst;
bus_space_handle_t sc_bsh;
+ bus_space_handle_t sc_hl_bsh;
bus_space_handle_t sc_sdhc_bsh;
struct sdhc_host *sc_hosts[1];
void *sc_ih; /* interrupt vectoring */
@@ -173,19 +173,19 @@
if (oa->obio_addr == SDMMC1_BASE_3430
|| oa->obio_addr == SDMMC2_BASE_3430
|| oa->obio_addr == SDMMC3_BASE_3430)
- return 1;
+ return 1;
#elif defined(OMAP_3530)
if (oa->obio_addr == SDMMC1_BASE_3530
|| oa->obio_addr == SDMMC2_BASE_3530
|| oa->obio_addr == SDMMC3_BASE_3530)
- return 1;
+ return 1;
#elif defined(OMAP4) || defined(OMAP5)
if (oa->obio_addr == SDMMC1_BASE_4430
|| oa->obio_addr == SDMMC2_BASE_4430
|| oa->obio_addr == SDMMC3_BASE_4430
|| oa->obio_addr == SDMMC4_BASE_4430
|| oa->obio_addr == SDMMC5_BASE_4430)
- return 1;
+ return 1;
#endif
#ifdef TI_AM335X
@@ -195,7 +195,7 @@
return 1;
#endif
- return 0;
+ return 0;
}
static void
@@ -208,6 +208,10 @@
int error, timo, clksft, n;
bool support8bit = false;
const char *transfer_mode = "PIO";
+#if defined(OMAP4)
+ uint32_t v;
+ int x, y;
+#endif
#ifdef TI_AM335X
size_t i;
#endif
@@ -219,16 +223,44 @@
sc->sc.sc_flags |= SDHC_FLAG_32BIT_ACCESS;
sc->sc.sc_flags |= SDHC_FLAG_NO_LED_ON;
sc->sc.sc_flags |= SDHC_FLAG_RSP136_CRC;
- sc->sc.sc_flags |= SDHC_FLAG_SINGLE_ONLY;
if (support8bit)
sc->sc.sc_flags |= SDHC_FLAG_8BIT_MODE;
-#ifdef TI_AM335X
+#if defined(OMAP_3430)
+ sc->sc.sc_flags |= SDHC_FLAG_SINGLE_ONLY;
+#elif defined(OMAP_3530) || defined(TI_DM37XX)
+ /*
+ * Advisory 2.1.1.128: MMC: Multiple Block Read Operation Issue
+ * from "OMAP3530/25/15/03 Applications Processor Silicon Revisions
+ * 3.1.2, 3.1, 3.0, 2.1, and 2.0".
+ */
+ switch (omap_devid()) {
+ case DEVID_OMAP35X_ES10:
+ case DEVID_OMAP35X_ES20:
+ case DEVID_OMAP35X_ES21:
+ case DEVID_AMDM37X_ES10: /* XXXX ? */
+ case DEVID_AMDM37X_ES11: /* XXXX ? */
+ case DEVID_AMDM37X_ES12: /* XXXX ? */
+ sc->sc.sc_flags |= SDHC_FLAG_SINGLE_ONLY;
+ break;
+ default:
+ break;
+ }
+ sc->sc.sc_flags |= SDHC_FLAG_NO_HS_BIT;
+#elif defined(TI_AM335X)
sc->sc.sc_flags |= SDHC_FLAG_WAIT_RESET;
- sc->sc.sc_flags &= ~SDHC_FLAG_SINGLE_ONLY;
-#endif
-#if defined(OMAP_3530)
- if (omap_chipid() == CHIPID_OMAP3530)
- sc->sc.sc_flags &= ~SDHC_FLAG_SINGLE_ONLY;
+#elif defined(OMAP_4430)
+ /*
+ * MMCHS_HCTL.HSPE Is Not Functional
+ * Errata ID: i626
+ *
+ * Due to design issue MMCHS_HCTL.HSPE bit does not work as intended.
+ * This means that the configuration must always be the normal speed
+ * mode configuration (MMCHS_HCTL.HSPE=0).
+ */
+ sc->sc.sc_flags |= SDHC_FLAG_NO_HS_BIT;
+
+// sc->sc.sc_flags |= SDHC_FLAG_USE_DMA;
+// sc->sc.sc_flags |= SDHC_FLAG_USE_ADMA2;
#endif
sc->sc.sc_host = sc->sc_hosts;
sc->sc.sc_clkbase = 96000; /* 96MHZ */
@@ -237,7 +269,6 @@
sc->sc.sc_vendor_rod = obiosdhc_rod;
sc->sc.sc_vendor_write_protect = obiosdhc_write_protect;
sc->sc.sc_vendor_card_detect = obiosdhc_card_detect;
- sc->sc.sc_vendor_bus_clock = obiosdhc_bus_clock;
sc->sc.sc_vendor_bus_width = obiosdhc_bus_width;
sc->sc_bst = oa->obio_iot;
@@ -246,6 +277,13 @@
#if defined(TI_AM335X)
error = bus_space_map(sc->sc_bst, oa->obio_addr + OMAP4_SDMMC_HL_SIZE,
oa->obio_size - OMAP4_SDMMC_HL_SIZE, 0, &sc->sc_bsh);
+#elif defined(OMAP4)
+ error = bus_space_map(sc->sc_bst, oa->obio_addr, oa->obio_size, 0,
+ &sc->sc_hl_bsh);
+ if (!error)
+ bus_space_subregion(sc->sc_bst, sc->sc_hl_bsh,
+ OMAP4_SDMMC_HL_SIZE, oa->obio_size - OMAP4_SDMMC_HL_SIZE,
+ &sc->sc_bsh);
#else
error = bus_space_map(sc->sc_bst, oa->obio_addr, oa->obio_size, 0,
&sc->sc_bsh);
@@ -266,20 +304,50 @@
cv_init(&sc->sc_edma_cv, "sdhcedma");
sc->sc_edma_fifo = oa->obio_addr +
- OMAP4_SDMMC_HL_SIZE + OMAP3_SDMMC_SDHC_OFFSET + SDHC_DATA;
+#ifdef TI_AM335X
+ OMAP4_SDMMC_HL_SIZE +
+#endif
+ OMAP3_SDMMC_SDHC_OFFSET + SDHC_DATA;
sc->sc.sc_flags |= SDHC_FLAG_USE_DMA;
sc->sc.sc_flags |= SDHC_FLAG_EXTERNAL_DMA;
sc->sc.sc_flags |= SDHC_FLAG_EXTDMA_DMAEN;
- sc->sc.sc_flags &= ~SDHC_FLAG_SINGLE_ONLY;
sc->sc.sc_vendor_transfer_data_dma = obiosdhc_edma_xfer_data;
transfer_mode = "EDMA";
}
no_dma:
#endif
+ if (sc->sc.sc_flags & SDHC_FLAG_USE_ADMA2)
+ transfer_mode = "ADMA2";
aprint_naive("\n");
aprint_normal(": SDHC controller (%s)\n", transfer_mode);
+#if defined(OMAP4)
+ v = bus_space_read_4(sc->sc_bst, sc->sc_hl_bsh, MMCHS_HL_REV);
+ aprint_normal_dev(sc->sc.sc_dev, "IP Rev 0x%08x", v);
+ v = bus_space_read_4(sc->sc_bst, sc->sc_hl_bsh, MMCHS_HL_HWINFO);
+ aprint_normal("%s", v & HL_HWINFO_RETMODE ? ", Retention Mode" : "");
+ x = 0;
+ switch (v & HL_HWINFO_MEM_SIZE_MASK) {
+ case HL_HWINFO_MEM_SIZE_512: x = 512; y = 512; break;
+ case HL_HWINFO_MEM_SIZE_1024: x = 1024; y = 1024; break;
+ case HL_HWINFO_MEM_SIZE_2048: x = 2048; y = 2048; break;
+ case HL_HWINFO_MEM_SIZE_4096: x = 4096; y = 2048; break;
+ }
+ if (x != 0)
+ aprint_normal(", %d byte FIFO, max block length %d bytes",
+ x, y);
+ aprint_normal("\n");
+#endif
+
+#if NEDMA > 0
+ if (strcmp(transfer_mode, "EDMA") == 0)
+ aprint_normal_dev(sc->sc.sc_dev,
+ "EDMA tx channel %d, rx channel %d\n",
+ edma_channel_index(sc->sc_edma_tx),
+ edma_channel_index(sc->sc_edma_rx));
+#endif
+
#ifdef TI_AM335X
/* XXX Not really AM335X-specific. */
for (i = 0; i < __arraycount(am335x_sdhc); i++)
@@ -293,7 +361,7 @@
if (oa->obio_addr == SDMMC2_BASE_TIAM335X) {
const char *mode;
u_int state;
-
+
const struct am335x_padconf *padconf = am335x_padconf_mmc1;
for (i = 0; padconf[i].padname; i++) {
const char *padname = padconf[i].padname;
@@ -387,30 +455,28 @@
bus_space_write_4(sc->sc_bst, sc->sc_bsh, MMCHS_CON,
bus_space_read_4(sc->sc_bst, sc->sc_bsh, MMCHS_CON) | CON_INIT);
- for (; n > 0; n--) {
- SDHC_WRITE(sc, SDHC_TRANSFER_MODE, 0x00000000);
- timo = 3000000; /* XXXX 3 sec. */
- stat = 0;
- while (!(stat & SDHC_COMMAND_COMPLETE)) {
- stat = SDHC_READ(sc, SDHC_NINTR_STATUS);
- if (--timo == 0)
- break;
- delay(1);
- }
- if (timo == 0) {
- aprint_error_dev(self, "INIT Procedure timeout\n");
- break;
- }
- SDHC_WRITE(sc, SDHC_NINTR_STATUS, stat);
- }
+ SDHC_WRITE(sc, SDHC_TRANSFER_MODE, 0x00000000);
+ delay(1000);
+ stat = SDHC_READ(sc, SDHC_NINTR_STATUS);
+ SDHC_WRITE(sc, SDHC_NINTR_STATUS, stat | SDHC_COMMAND_COMPLETE);
bus_space_write_4(sc->sc_bst, sc->sc_bsh, MMCHS_CON,
bus_space_read_4(sc->sc_bst, sc->sc_bsh, MMCHS_CON) & ~CON_INIT);
+ SDHC_WRITE(sc, SDHC_NINTR_STATUS, 0xffffffff);
+
SDHC_WRITE(sc, SDHC_CLOCK_CTL,
SDHC_READ(sc, SDHC_CLOCK_CTL) & ~SDHC_SDCLK_ENABLE);
SDHC_WRITE(sc, SDHC_CLOCK_CTL,
SDHC_READ(sc, SDHC_CLOCK_CTL) & ~sc->sc.sc_clkmsk);
SDHC_WRITE(sc, SDHC_CLOCK_CTL,
SDHC_READ(sc, SDHC_CLOCK_CTL) | CLKD(150) << clksft);
+ timo = 3000000; /* XXXX 3 sec. */
+ while (--timo) {
+ if (SDHC_READ(sc, SDHC_CLOCK_CTL) & SDHC_INTCLK_STABLE)
+ break;
+ delay(1);
+ }
+ if (timo == 0)
+ aprint_error_dev(self, "ICS timeout(2)\n");
SDHC_WRITE(sc, SDHC_CLOCK_CTL,
SDHC_READ(sc, SDHC_CLOCK_CTL) | SDHC_SDCLK_ENABLE);
@@ -487,23 +553,6 @@
return 0;
}
-static int
-obiosdhc_bus_clock(struct sdhc_softc *sc, int clk)
-{
- struct obiosdhc_softc *osc = (struct obiosdhc_softc *)sc;
- uint32_t ctl;
-
- ctl = bus_space_read_4(osc->sc_bst, osc->sc_bsh, MMCHS_SYSCTL);
- if (clk == 0) {
- ctl &= ~SYSCTL_CEN;
- } else {
- ctl |= SYSCTL_CEN;
- }
- bus_space_write_4(osc->sc_bst, osc->sc_bsh, MMCHS_SYSCTL, ctl);
-
- return 0;
-}
-
#if NEDMA > 0
static int
obiosdhc_edma_init(struct obiosdhc_softc *sc, unsigned int edmabase)
@@ -518,10 +567,6 @@
obiosdhc_edma_done, sc);
KASSERT(sc->sc_edma_rx != NULL);
- device_printf(sc->sc.sc_dev, "EDMA tx channel %d, rx channel %d\n",
- edma_channel_index(sc->sc_edma_tx),
- edma_channel_index(sc->sc_edma_rx));
-
/* Allocate some PaRAM pages */
for (i = 0; i < __arraycount(sc->sc_edma_param_tx); i++) {
sc->sc_edma_param_tx[i] = edma_param_alloc(sc->sc_edma_tx);
@@ -676,7 +721,7 @@
*/
KASSERT((cmd->c_dmamap->dm_segs[seg].ds_addr & 0x1f) == 0);
- /*
+ /*
* For unknown reason, the A-DMA transfers never completes for
Home |
Main Index |
Thread Index |
Old Index