Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/evbarm/conf Add NEXCOM VTC100.



details:   https://anonhg.NetBSD.org/src/rev/4e9248a79e03
branches:  trunk
changeset: 346281:4e9248a79e03
user:      kiyohara <kiyohara%NetBSD.org@localhost>
date:      Mon Jul 04 15:53:25 2016 +0000

description:
Add NEXCOM VTC100.

diffstat:

 sys/arch/evbarm/conf/VTC100 |  353 ++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 353 insertions(+), 0 deletions(-)

diffs (truncated from 357 to 300 lines):

diff -r 0d7ef0095196 -r 4e9248a79e03 sys/arch/evbarm/conf/VTC100
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/evbarm/conf/VTC100       Mon Jul 04 15:53:25 2016 +0000
@@ -0,0 +1,353 @@
+#
+#      $NetBSD: VTC100,v 1.1 2016/07/04 15:53:25 kiyohara Exp $
+#
+#      BEAGLEBONE -- TI AM335x board Kernel
+#
+
+include        "arch/evbarm/conf/std.beagle"
+
+# estimated number of users
+
+maxusers       32
+
+# Standard system options
+
+options        RTC_OFFSET=0    # hardware clock is this many mins. west of GMT
+#options       NTP             # NTP phase/frequency locked loop
+
+# CPU options
+
+options        CPU_CORTEXA8
+options        TI_AM335X
+options        PMAPCOUNTERS
+
+# XXX The Cortex PMC delay() doesn't seem to work.
+#no options    CORTEX_PMC
+
+# Architecture options
+#makeoptions   CPUFLAGS+="-mthumb"
+
+# File systems
+
+file-system    FFS             # UFS
+#file-system   LFS             # log-structured file system
+file-system    MFS             # memory file system
+file-system    NFS             # Network file system
+#file-system   ADOSFS          # AmigaDOS-compatible file system
+file-system    EXT2FS          # second extended file system (linux)
+#file-system   CD9660          # ISO 9660 + Rock Ridge file system
+file-system    MSDOSFS         # MS-DOS file system
+#file-system   FDESC           # /dev/fd
+#file-system   KERNFS          # /kern
+file-system    NULLFS          # loopback file system
+#file-system   PROCFS          # /proc
+#file-system   PUFFS           # Userspace file systems (e.g. ntfs-3g & sshfs)
+#file-system   UMAPFS          # NULLFS + uid and gid remapping
+#file-system   UNION           # union file system
+file-system    TMPFS           # memory file system
+file-system    PTYFS           # /dev/pts/N support
+
+# File system options
+#options       QUOTA           # legacy UFS quotas
+#options       QUOTA2          # new, in-filesystem UFS quotas
+#options       FFS_EI          # FFS Endian Independent support
+#options       NFSSERVER
+options        WAPBL           # File system journaling support
+#options       FFS_NO_SNAPSHOT # No FFS snapshot support
+
+# Networking options
+
+#options       GATEWAY         # packet forwarding
+options        INET            # IP + ICMP + TCP + UDP
+options        INET6           # IPV6
+#options       IPSEC           # IP security
+#options       IPSEC_DEBUG     # debug for IP security
+#options       MROUTING        # IP multicast routing
+#options       PIM             # Protocol Independent Multicast
+#options       NETATALK        # AppleTalk networking
+#options       PPP_BSDCOMP     # BSD-Compress compression support for PPP
+#options       PPP_DEFLATE     # Deflate compression support for PPP
+#options       PPP_FILTER      # Active filter support for PPP (requires bpf)
+#options       TCP_DEBUG       # Record last TCP_NDEBUG packets with SO_DEBUG
+
+options        NFS_BOOT_BOOTP
+options        NFS_BOOT_DHCP
+#options               NFS_BOOT_BOOTSTATIC
+#options               NFS_BOOTSTATIC_MYIP="\"192.168.1.4\""
+#options               NFS_BOOTSTATIC_GWIP="\"192.168.1.1\""
+#options               NFS_BOOTSTATIC_MASK="\"255.255.255.0\""
+#options               NFS_BOOTSTATIC_SERVADDR="\"192.168.1.1\""
+#options               NFS_BOOTSTATIC_SERVER="\"192.168.1.1:/nfs/sdp2430\""
+
+options                NFS_BOOT_RWSIZE=1024
+
+# Compatibility options
+
+options                COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
+#options       COMPAT_43       # 4.3BSD compatibility.
+#options       COMPAT_09       # NetBSD 0.9,
+#options       COMPAT_10       # NetBSD 1.0,
+#options       COMPAT_11       # NetBSD 1.1,
+#options       COMPAT_12       # NetBSD 1.2,
+#options       COMPAT_13       # NetBSD 1.3,
+#options       COMPAT_14       # NetBSD 1.4,
+#options       COMPAT_15       # NetBSD 1.5,
+#options       COMPAT_16       # NetBSD 1.6,
+#options       COMPAT_20       # NetBSD 2.0,
+options        COMPAT_30       # NetBSD 3.0,
+options        COMPAT_40       # NetBSD 4.0,
+options        COMPAT_50       # NetBSD 5.0,
+options        COMPAT_60       # NetBSD 6.0, and
+options        COMPAT_70       # NetBSD 7.0 binary compatibility.
+#options       TCP_COMPAT_42   # 4.2BSD TCP/IP bug compat. Not recommended.
+#options               COMPAT_BSDPTY   # /dev/[pt]ty?? ptys.
+
+# Shared memory options
+
+options        SYSVMSG         # System V-like message queues
+options        SYSVSEM         # System V-like semaphores
+options        SYSVSHM         # System V-like memory sharing
+
+# Device options
+
+#options       MEMORY_DISK_HOOKS       # boottime setup of ramdisk
+#options       MEMORY_DISK_ROOT_SIZE=8192      # Size in blocks
+#options       MEMORY_DISK_DYNAMIC
+#options       MINIROOTSIZE=1000       # Size in blocks
+#options       MEMORY_DISK_IS_ROOT     # use memory disk as root
+
+# Wedge support
+options        DKWEDGE_AUTODISCOVER    # Automatically add dk(4) instances
+options        DKWEDGE_METHOD_GPT      # Supports GPT partitions as wedges
+
+# Miscellaneous kernel options
+options        KTRACE          # system call tracing, a la ktrace(1)
+#options       SCSIVERBOSE     # Verbose SCSI errors
+#options       MIIVERBOSE      # Verbose MII autoconfuration messages
+#options       DDB_KEYCODE=0x40
+#options       USERCONF        # userconf(4) support
+#options       PIPE_SOCKETPAIR # smaller, but slower pipe(2)
+
+# Development and Debugging options
+
+#options       PERFCTRS        # performance counters
+options        DIAGNOSTIC      # internal consistency checks
+options        DEBUG
+#options       KDTRACE_HOOKS   # kernel DTrace hooks
+#options       PMAP_DEBUG      # Enable pmap_debug_level code
+#options       IPKDB           # remote kernel debugging
+#options       VERBOSE_INIT_ARM # verbose bootstraping messages
+options        DDB             # in-kernel debugger
+options                DDB_ONPANIC=1
+options        DDB_HISTORY_SIZE=100    # Enable history editing in DDB
+#options       KGDB
+makeoptions    DEBUG="-g"      # compile full symbol table
+makeoptions    COPY_SYMTAB=1
+
+## USB Debugging options
+options USB_DEBUG
+options EHCI_DEBUG
+options OHCI_DEBUG
+options UHUB_DEBUG
+
+
+# Valid options for BOOT_ARGS:
+#  single              Boot to single user only
+#  kdb                 Give control to kernel debugger
+#  ask                 Ask for file name to reboot from
+#  pmapdebug=<n>       If PMAP_DEBUG, set pmap_debug_level to <n>
+#  memorydisk=<n>      Set memorydisk size to <n> KB
+#  quiet               Show aprint_naive output
+#  verbose             Show aprint_normal and aprint_verbose output
+options                BOOT_ARGS="\"-v\""
+
+config         netbsd          root on ? type ?
+
+# The main bus device
+mainbus0       at root
+
+# The boot cpu
+cpu0           at mainbus?
+
+# L3 Interconnect
+#L3i0          at mainbus?
+
+# OBIO
+obio0          at mainbus? base 0x44c00000 size 0x00400000     # L4_WKUP
+obio1          at mainbus? base 0x48000000 size 0x01000000     # L4_PER
+obio2          at mainbus? base 0x4a000000 size 0x01000000     # L4_FAST
+
+# Enhanced Direct Memory Access controller
+edma0          at mainbus? base 0x49000000 size 0x100000 intrbase 12
+
+# General Purpose Memory Controller
+gpmc0          at mainbus? base 0x50000000
+
+# Interrupt Controller
+omapicu0       at obio1 addr 0x48200000 size 0x1000 intrbase 0
+
+# Power, Reset and Clock Management
+prcm0          at obio0 addr 0x44e00000 size 0x2000    # PRM Module
+
+# Control Module
+sitaracm0      at obio0 addr 0x44e10000 size 0x2000
+
+# SDHC controllers
+sdhc0          at obio1 addr 0x48060000 size 0x1000 intr 64 edmabase 24
+sdmmc*         at sdhc?
+ld*            at sdmmc?
+#options SDMMC_DEBUG
+#options SDHC_DEBUG
+
+# General-purpose I/O pins
+omapgpio0      at obio0 addr 0x44e07000 size 0x1000 # intrbase 128 intr 29
+gpio0          at omapgpio0
+omapgpio1      at obio1 addr 0x4804c000 size 0x1000 # intrbase 160 intr 30
+gpio1          at omapgpio1
+omapgpio2      at obio1 addr 0x481ac000 size 0x1000 # intrbase 192 intr 32
+gpio2          at omapgpio2
+omapgpio3      at obio1 addr 0x481ae000 size 0x1000 # intrbase 224 intr 32
+gpio3          at omapgpio3
+
+# I2C Controller
+tiiic0         at obio0 addr 0x44e0b000 size 0x1000 intr 70
+iic*           at tiiic?
+#?             at iic? addr 0x00
+#tps65910pmic0 at iic? addr 0x12       # TPS65910 ID0 (SmartReflex)
+#tlv320aic3x   at iic? addr 0x18       # TLV320AIC3x
+#tps65910pmic1 at iic? addr 0x2d       # TPS65910 ID1  # RTC
+#micon         at iic? addr 0x5a
+#?             at iic? addr 0x76
+
+# On-board 16550 UARTs
+com0           at obio1 addr 0x48022000 size 0x1000 intr 73 mult 4     # UART1
+options        CONSADDR=0x48022000, CONSPEED=115200
+# GPS
+com1           at obio1 addr 0x481a6000 size 0x1000 intr 44 mult 4     # UART3
+
+# XXX Clock assignment is kinda random.  My DM timer 3 seems to be
+# unhappy and I don't know why.  DM timer 0 doesn't seem to deliver
+# interrupts for the hard clock, although it seems to be the obvious
+# choice.
+
+# Hardclock timer
+omapdmtimer0   at obio1 addr 0x48040000 size 0x1000 intr 68    # DM Timer 2
+
+# Time counter
+omapdmtimer1   at obio0 addr 0x44e31000 size 0x1000 intr 67    # DM Timer 1ms
+
+# Statclock timer
+omapdmtimer2   at obio1 addr 0x48044000 size 0x1000 intr 92    # DM Timer 4
+
+# Watchdog timers
+omapwdt32k*    at obio0 addr 0x44e35000 size 0x1000    # WDT1
+
+# onboard video, experimental. Video mode is hardcoded in the driver
+#tifb*                 at obio1 addr 0x4830E000 size 0x1000 intr 36
+
+# make sure the console display is always wsdisplay0
+#wsdisplay*    at wsemuldisplaydev?
+
+# various options for wscons - we try to look as much like a standard
+# sun console as possible
+#options       WSEMUL_VT100
+#options       WSDISPLAY_COMPAT_PCVT
+#options       WSDISPLAY_COMPAT_SYSCONS
+#options       WSDISPLAY_COMPAT_USL
+#options       WSDISPLAY_SCROLLSUPPORT
+#options       WS_KERNEL_FG=WSCOL_GREEN
+#options       WSDISPLAY_DEFAULTSCREENS=4
+#options       FONT_GALLANT12x22
+#options       FONT_BOLD8x16
+# compatibility to other console drivers
+#options       WSDISPLAY_COMPAT_RAWKBD         # can get raw scancodes
+
+pseudo-device  wsmux                   # mouse & keyboard multiplexor
+pseudo-device  wsfont
+
+# Ethernet
+cpsw*          at obio2 addr 0x4a100000 size 0x8000 intrbase 93
+ukphy*         at mii?
+
+# On-board USB. Experimental
+tiotg*         at mainbus0 base 0x47400000 size 0x5000 intrbase 17
+motg*  at tiotg? port ?
+usb*           at motg?
+uhub*          at usb?
+uhub*          at uhub? port ?
+
+uhidev*                at uhub?
+
+# USB Keyboards
+ukbd*  at uhidev? reportid ?
+wskbd* at ukbd? console ? mux 1
+
+# USB Mice
+ums*   at uhidev? reportid ?
+wsmouse* at ums? mux 0
+
+# USB generic touchscreen
+uts*   at uhidev? reportid ?
+wsmouse* at uts? mux 0
+
+# USB Modem
+umodem* at uhub? port ? configuration ?
+ucom*  at umodem?
+# Serial adapters



Home | Main Index | Thread Index | Old Index