Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/arm/rockchip Cleanup freq setting a bit. Add a tabl...
details: https://anonhg.NetBSD.org/src/rev/9089d358f781
branches: trunk
changeset: 335248:9089d358f781
user: jmcneill <jmcneill%NetBSD.org@localhost>
date: Wed Dec 31 18:09:05 2014 +0000
description:
Cleanup freq setting a bit. Add a table of supported rates in ~200MHz steps
from 600MHz to 1608MHz, and let the cpu.frequency parameter match the
closest available freq (without going over +50MHz).
After updating APLL, wait for PLL lock.
Do APLL changes with PLL mode set to slow, rather than the previous
(and more complex) APLL/GPLL dance.
diffstat:
sys/arch/arm/rockchip/rockchip_board.c | 176 ++++++++++++++++----------------
1 files changed, 88 insertions(+), 88 deletions(-)
diffs (286 lines):
diff -r d565eeec0daf -r 9089d358f781 sys/arch/arm/rockchip/rockchip_board.c
--- a/sys/arch/arm/rockchip/rockchip_board.c Wed Dec 31 18:08:58 2014 +0000
+++ b/sys/arch/arm/rockchip/rockchip_board.c Wed Dec 31 18:09:05 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: rockchip_board.c,v 1.8 2014/12/31 16:16:35 jmcneill Exp $ */
+/* $NetBSD: rockchip_board.c,v 1.9 2014/12/31 18:09:05 jmcneill Exp $ */
/*-
* Copyright (c) 2014 Jared D. McNeill <jmcneill%invisible.ca@localhost>
@@ -29,7 +29,7 @@
#include "opt_rockchip.h"
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: rockchip_board.c,v 1.8 2014/12/31 16:16:35 jmcneill Exp $");
+__KERNEL_RCSID(0, "$NetBSD: rockchip_board.c,v 1.9 2014/12/31 18:09:05 jmcneill Exp $");
#include <sys/param.h>
#include <sys/bus.h>
@@ -83,6 +83,13 @@
ROCKCHIP_CRU_OFFSET, ROCKCHIP_CRU_SIZE, pbsh);
}
+static void
+rockchip_get_grf_bsh(bus_space_handle_t *pbsh)
+{
+ bus_space_subregion(&rockchip_bs_tag, rockchip_core1_bsh,
+ ROCKCHIP_GRF_OFFSET, ROCKCHIP_GRF_SIZE, pbsh);
+}
+
static u_int
rockchip_pll_get_rate(bus_size_t con0_reg, bus_size_t con1_reg)
{
@@ -127,80 +134,68 @@
return rockchip_pll_get_rate(CRU_APLL_CON0_REG, CRU_APLL_CON1_REG);
}
+struct rk3188_apll_rate {
+ u_int rate;
+ u_int nr, nf, no;
+ u_int core_div, core_periph_div, core_axi_div;
+ u_int aclk_div, hclk_div, pclk_div, ahb2apb_div;
+};
+
+#define RK3188_RATE(_r, _nf, _no, _p, _a, _aclk, _hclk, _pclk, _ahb2apb) \
+ { .rate = (_r) * 1000000, .nr = 1, .nf = (_nf), .no = (_no), \
+ .core_div = 1, .core_periph_div = (_p), .core_axi_div = (_a), \
+ .aclk_div = (_aclk), .hclk_div = (_hclk), .pclk_div = (_pclk), \
+ .ahb2apb_div = (_ahb2apb) }
+
+static const struct rk3188_apll_rate rk3188_apll_rates[] = {
+ RK3188_RATE(1608, 67, 1, 8, 4, 4, 2, 4, 2),
+ RK3188_RATE(1416, 59, 1, 8, 4, 4, 2, 4, 2),
+ RK3188_RATE(1200, 50, 1, 8, 4, 4, 2, 4, 2),
+ RK3188_RATE(1008, 42, 1, 8, 3, 3, 2, 4, 2),
+ RK3188_RATE( 816, 68, 2, 8, 4, 3, 2, 4, 2),
+ RK3188_RATE( 600, 50, 2, 4, 4, 3, 2, 4, 2),
+};
+
+#define RK3188_GRF_STATUS0_REG 0x00ac
+#define RK3188_GRF_STATUS0_APLL_LOCK __BIT(6)
+
static u_int
rk3188_apll_set_rate(u_int rate)
{
+ const struct rk3188_apll_rate *r = NULL;
bus_space_tag_t bst = &rockchip_bs_tag;
- bus_space_handle_t bsh;
+ bus_space_handle_t bsh, grf_bsh;
uint32_t apll_con0, apll_con1, apll_con2, clksel0_con, clksel1_con;
uint32_t reset_mask, reset;
- u_int no, nr, nf, core_div, core_periph_div, core_axi_div,
- aclk_div, hclk_div, pclk_div, ahb2apb_div;
u_int cpu_aclk_div_con;
const bool rk3188plus_p = rockchip_is_chip(ROCKCHIP_CHIPVER_RK3188PLUS);
rockchip_get_cru_bsh(&bsh);
+ rockchip_get_grf_bsh(&grf_bsh);
#ifdef ROCKCHIP_CLOCK_DEBUG
printf("%s: rate=%u rk3188plus_p=%d\n", __func__, rate, rk3188plus_p);
#endif
- switch (rate) {
- case 1608000000:
- nr = 1;
- nf = 67;
- no = 1;
- core_div = 1;
- core_periph_div = 8;
- core_axi_div = 4;
- aclk_div = 4;
- hclk_div = 2;
- pclk_div = 4;
- ahb2apb_div = 2;
- break;
- case 1416000000:
- nr = 1;
- nf = 59;
- no = 1;
- core_div = 1;
- core_periph_div = 8;
- core_axi_div = 4;
- aclk_div = 4;
- hclk_div = 2;
- pclk_div = 4;
- ahb2apb_div = 2;
- break;
- case 1008000000:
- nr = 1;
- nf = 42;
- no = 1;
- core_div = 1;
- core_periph_div = 8;
- core_axi_div = 3;
- aclk_div = 3;
- hclk_div = 2;
- pclk_div = 4;
- ahb2apb_div = 2;
- break;
- case 600000000:
- nr = 1;
- nf = 50;
- no = 2;
- core_div = 1;
- core_periph_div = 4;
- core_axi_div = 4;
- aclk_div = 3;
- hclk_div = 2;
- pclk_div = 4;
- ahb2apb_div = 2;
- break;
- default:
+ /* Pick the closest rate (nearest 100MHz increment) */
+ for (int i = 0; i < __arraycount(rk3188_apll_rates); i++) {
+ u_int trate = rate / 1000000;
+ u_int arate = ((rk3188_apll_rates[i].rate / 1000000) + 50)
+ / 100 * 100;
+ if (arate <= trate) {
+ r = &rk3188_apll_rates[i];
+ break;
+ }
+ }
+ if (r == NULL) {
#ifdef ROCKCHIP_CLOCK_DEBUG
- printf("%s: unsupported rate %u\n", __func__, rate);
+ printf("CPU: No matching rate found for %u MHz\n", rate);
#endif
- return EINVAL;
+ return ENOENT;
}
+ printf("CPU: Set frequency to %u MHz...\n", r->rate / 1000000);
+
if (rk3188plus_p) {
reset_mask = CRU_PLL_CON3_RESET_MASK;
reset = CRU_PLL_CON3_RESET;
@@ -210,15 +205,15 @@
}
apll_con0 = CRU_PLL_CON0_CLKR_MASK | CRU_PLL_CON0_CLKOD_MASK;
- apll_con0 |= __SHIFTIN(no - 1, CRU_PLL_CON0_CLKOD);
- apll_con0 |= __SHIFTIN(nr - 1, CRU_PLL_CON0_CLKR);
+ apll_con0 |= __SHIFTIN(r->no - 1, CRU_PLL_CON0_CLKOD);
+ apll_con0 |= __SHIFTIN(r->nr - 1, CRU_PLL_CON0_CLKR);
apll_con1 = CRU_PLL_CON1_CLKF_MASK;
- apll_con1 |= __SHIFTIN(nf - 1, CRU_PLL_CON1_CLKF);
+ apll_con1 |= __SHIFTIN(r->nf - 1, CRU_PLL_CON1_CLKF);
if (rk3188plus_p) {
apll_con2 = CRU_PLL_CON2_BWADJ_MASK;
- apll_con2 |= __SHIFTIN(nf >> 1, CRU_PLL_CON2_BWADJ);
+ apll_con2 |= __SHIFTIN(r->nf >> 1, CRU_PLL_CON2_BWADJ);
} else {
apll_con2 = 0;
}
@@ -226,18 +221,19 @@
clksel0_con = RK3188_CRU_CLKSEL_CON0_A9_CORE_DIV_CON_MASK |
CRU_CLKSEL_CON0_CORE_PERI_DIV_CON_MASK |
CRU_CLKSEL_CON0_A9_CORE_DIV_CON_MASK;
- clksel0_con |= __SHIFTIN(core_div - 1,
+ clksel0_con |= __SHIFTIN(r->core_div - 1,
RK3188_CRU_CLKSEL_CON0_A9_CORE_DIV_CON);
- clksel0_con |= __SHIFTIN(ffs(core_periph_div) - 2,
+ clksel0_con |= __SHIFTIN(ffs(r->core_periph_div) - 2,
CRU_CLKSEL_CON0_CORE_PERI_DIV_CON);
- clksel0_con |= __SHIFTIN(aclk_div - 1,
+ clksel0_con |= __SHIFTIN(r->aclk_div - 1,
CRU_CLKSEL_CON0_A9_CORE_DIV_CON);
clksel1_con = CRU_CLKSEL_CON1_AHB2APB_PCLKEN_DIV_CON_MASK |
CRU_CLKSEL_CON1_CPU_PCLK_DIV_CON_MASK |
- CRU_CLKSEL_CON1_CPU_HCLK_DIV_CON_MASK;
+ CRU_CLKSEL_CON1_CPU_HCLK_DIV_CON_MASK |
+ RK3188_CRU_CLKSEL_CON1_CPU_ACLK_DIV_CON_MASK;
- switch (core_axi_div) {
+ switch (r->core_axi_div) {
case 1: cpu_aclk_div_con = 0; break;
case 2: cpu_aclk_div_con = 1; break;
case 3: cpu_aclk_div_con = 2; break;
@@ -245,12 +241,14 @@
case 8: cpu_aclk_div_con = 4; break;
default: panic("bad core_axi_div");
}
- clksel1_con |= __SHIFTIN(ffs(ahb2apb_div) - 1,
+ clksel1_con |= __SHIFTIN(ffs(r->ahb2apb_div) - 1,
CRU_CLKSEL_CON1_AHB2APB_PCLKEN_DIV_CON);
- clksel1_con |= __SHIFTIN(ffs(hclk_div) - 1,
+ clksel1_con |= __SHIFTIN(ffs(r->hclk_div) - 1,
CRU_CLKSEL_CON1_CPU_HCLK_DIV_CON);
- clksel1_con |= __SHIFTIN(ffs(pclk_div) - 1,
+ clksel1_con |= __SHIFTIN(ffs(r->pclk_div) - 1,
CRU_CLKSEL_CON1_CPU_PCLK_DIV_CON);
+ clksel1_con |= __SHIFTIN(cpu_aclk_div_con,
+ RK3188_CRU_CLKSEL_CON1_CPU_ACLK_DIV_CON);
#ifdef ROCKCHIP_CLOCK_DEBUG
printf("before: APLL_CON0: %#x\n",
@@ -263,16 +261,10 @@
bus_space_read_4(bst, bsh, CRU_CLKSEL_CON_REG(1)));
#endif
- /* Set CPU clk src to GPLL */
- const u_int curcpufreq = rockchip_cpu_get_rate();
- const u_int gpllfreq = rockchip_gpll_get_rate();
-
- bus_space_write_4(bst, bsh, CRU_CLKSEL_CON_REG(0),
- RK3188_CRU_CLKSEL_CON0_A9_CORE_DIV_CON_MASK|
- CRU_CLKSEL_CON0_CPU_CLK_PLL_SEL_MASK|
- __SHIFTIN(howmany(curcpufreq, gpllfreq) - 1,
- RK3188_CRU_CLKSEL_CON0_A9_CORE_DIV_CON)|
- CRU_CLKSEL_CON0_CPU_CLK_PLL_SEL);
+ bus_space_write_4(bst, bsh, CRU_MODE_CON_REG,
+ CRU_MODE_CON_APLL_WORK_MODE_MASK |
+ __SHIFTIN(CRU_MODE_CON_APLL_WORK_MODE_SLOW,
+ CRU_MODE_CON_APLL_WORK_MODE));
/* Power down */
bus_space_write_4(bst, bsh, CRU_APLL_CON3_REG, reset_mask | reset);
@@ -283,28 +275,36 @@
if (apll_con2)
bus_space_write_4(bst, bsh, CRU_APLL_CON2_REG, apll_con2);
- /* Wait for PLL lock */
for (volatile int i = 5000; i >= 0; i--)
;
/* Power up */
bus_space_write_4(bst, bsh, CRU_APLL_CON3_REG, reset_mask);
+ /* Wait for PLL lock */
+ printf("CPU: Waiting for PLL lock...\n");
for (volatile int i = 50000; i >= 0; i--)
;
+ int retry = ROCKCHIP_REF_FREQ;
+ while (--retry > 0) {
+ uint32_t status = bus_space_read_4(bst, grf_bsh,
+ RK3188_GRF_STATUS0_REG);
+ if (status & RK3188_GRF_STATUS0_APLL_LOCK)
+ break;
+ for (volatile int i = 1000; i >= 0; i--)
+ ;
+ }
+ printf("CPU: PLL lock %s\n", retry == 0 ? "timeout!" : "OK");
/* Update CLKSEL regs */
bus_space_write_4(bst, bsh, CRU_CLKSEL_CON_REG(0), clksel0_con);
bus_space_write_4(bst, bsh, CRU_CLKSEL_CON_REG(1), clksel1_con);
- /* Set CPU clk src to APLL */
- bus_space_write_4(bst, bsh, CRU_CLKSEL_CON_REG(0),
- CRU_CLKSEL_CON0_CPU_CLK_PLL_SEL_MASK);
-
- bus_space_write_4(bst, bsh, CRU_CLKSEL_CON_REG(0),
- RK3188_CRU_CLKSEL_CON1_CPU_ACLK_DIV_CON_MASK |
- __SHIFTIN(cpu_aclk_div_con,
- RK3188_CRU_CLKSEL_CON1_CPU_ACLK_DIV_CON));
+ /* Slow -> Normal mode */
+ bus_space_write_4(bst, bsh, CRU_MODE_CON_REG,
+ CRU_MODE_CON_APLL_WORK_MODE_MASK |
+ __SHIFTIN(CRU_MODE_CON_APLL_WORK_MODE_NORMAL,
+ CRU_MODE_CON_APLL_WORK_MODE));
#ifdef ROCKCHIP_CLOCK_DEBUG
printf("after: APLL_CON0: %#x\n",
Home |
Main Index |
Thread Index |
Old Index