Czesc,
mam nastepujacy problem z zabootowaniem jadra smp. Skompilowalo mi sie
poprawnie z pliku konfiguracyjnego SWINGER.MP, zeby nie bylo, ze moja
konfiguracja jest nieprawidlowa.
Oto, co na koncu komunikatow z jadra widac przy starcie:

SCB_LUN[0xff] SCB_TAG[0xff]
 0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]

Ten komunikat powtarza sie zmieniajac cyferki od 0 do 15. Nastepnie:

Pending list:
 14 SCB_CONTROL[0x40]SCB_SCSIID[0x17]
SCB_LUN[0x0]
Kernel Free SCB list: 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Untagged Q(1): 14
<<< Dump Card State Ends >>>
sg[0] - Addr 0x238bae94 : Lenght 36
probe(ahc0:0:1:0): ahc0: no longer in timeout, status = 0
ahc0: Issued ChannelA Bus Reset. 1 SCBs aborted

Do wiadomosci dolaczam "dmesg > dmesg" z jadra obslugujacego jeden procesor.

Dziwi mnie to, ze komunikaty te nie dotycza wcale procesorow, tylko SCSI.
Prosze o pomoc i/lub sugestie.

Pozdrawiam,
Marcin Zieciak.



------------------------------------------------------------------------

NetBSD 3.0.1 (KONTOWNIA) #0: Thu Oct 19 23:52:48 CEST 2006
	ymarg@misioo.kontownia.pl:/usr/src/sys/arch/i386/compile/KONTOWNIA
total memory = 575 MB
avail memory = 554 MB
BIOS32 rev. 0 found at 0xf73aa
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 332.42 MHz, id 0x652
cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 183fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183fbff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82441FX (PMC) PCI and Memory Controller (rev. 0x02)
pceb0 at pci0 dev 13 function 0
pceb0: Intel 82375EB/SB PCI-EISA Bridge (rev. 0x15)
ahc1 at pci0 dev 15 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc1: interrupting at irq 14
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
fxp0 at pci0 dev 16 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 9
fxp0: Ethernet address 00:d0:b7:bf:c8:84
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pdcide0 at pci0 dev 18 function 0
pdcide0: Promise Ultra100TX2v2/ATA Bus Master IDE Accelerator (rev. 0x01)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using irq 11 for native-PCI interrupt
atabus0 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus1 at pdcide0 channel 1
vga1 at pci0 dev 20 function 0: ATI Technologies Mach64 VT (rev. 0x40)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
eisa0 at pceb0
eisa0: can't map I/O space for slot 15
isa0 at pceb0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <IBM, DNES-309170W, SA60> disk fixed
sd0: 8683 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17783301 sectors
sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
wd0 at atabus0 drive 0: <SAMSUNG SV2042H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19465 MB, 39549 cyl, 16 head, 63 sec, 512 bytes/sect x 39865392 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(pdcide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd0 at scsibus0 target 5 lun 0: <NEC, CD-ROM DRIVE:464, 1.05> cdrom removable
cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
vga_init_screen: no font
wsdisplay0: screen 4 added (80x50, vt100 emulation)
Accounting started