Dnia Thu, Jan 22, 2004 at 11:58:00AM +0000, Piotr Grabowski napisał(a):
On Thu, Jan 22, 2004 at 11:58:00AM +0000, Piotr Grabowski wrote:
> cze
>  mam problem: nie moge wyciagnac na netbsd transferow ponad 300kb/s.
> nie wiem czym to moze byc spowodowane. karta sieciowa to VIA VT6102
> (Rhine II) 10/100 Ethernet, switch do ktorego jestem podpiety obsluguje
> 100mbit/s full duplex. karta jest ustawiona na autonegocjacje. ip
> przydzielany dynamicznie. czy to mozliwe, ze wtyczki kabla sa zle
> zalozone ? (chyba wtedy to wogole nie powinna siec chodzic)
> 
> pozdrawiam i prosze o pomoc
> Piotr Grabowski
> 
> oto konfiguracja:
> # ifconfig vr0
> vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>        address: 00:0a:e6:48:ee:03
>        media: Ethernet autoselect (100baseTX full-duplex)
>        status: active
>        inet 153.19.211.175 netmask 0xfffff000 broadcast 153.19.223.255
> 
> 
> 
> NetBSD 1.6.1 (Grabarz NetBSD 1.6.1) #0: Tue Jan 20 00:30:17 UTC 2004
>    root@grabarz:/usr/src/sys/arch/i386/compile/grabarz
> cpu0: AMD Athlon Model 6 (Palomino) (686-class), 1662.05 MHz
> cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
> cpu0: L2 cache 256 KB 64b/line 16-way
> cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
> cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
> cpu0: features 383fbff<FXSR,SSE>
> total memory = 255 MB
> avail memory = 233 MB
> using 3296 buffers containing 13184 KB of memory
> BIOS32 rev. 0 found at 0xfb370
> mainbus0 (root)
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: VIA Technologies product 0x3189 (rev. 0x00)
> agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb168 (rev. 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x0171 (rev. 0xa3)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> emuxki0 at pci0 dev 9 function 0: Creative Labs SBLive! EMU 10000 (audio
> multime
> dia, revision 0x06)
> emuxki0: interrupting at irq 5
> emuxki0: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
> audio0 at emuxki0: full duplex, mmap, independent
> Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x06)
> at pci0
> dev 9 function 1 not configured
> bktr0 at pci0 dev 10 function 0
> bktr0: interrupting at irq 10
> bktr0: FlyVideo, Philips NTSC tuner.
> Brooktree product 0x0878 (miscellaneous multimedia, revision 0x02) at
> pci0 dev 1
> 0 function 1 not configured
> VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x80)
> at pci0
> dev 16 function 0 not configured
> VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x80)
> at pci0
> dev 16 function 1 not configured
> VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x80)
> at pci0
> dev 16 function 2 not configured
> VIA Technologies product 0x3104 (USB serial bus, interface 0x20,
> revision 0x82)
> at pci0 dev 16 function 3 not configured
> pcib0 at pci0 dev 17 function 0
> pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
> pciide0 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133 controller
> pciide0: bus-master DMA support present
> pciide0: primary channel configured to compatibility mode
> wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00CRA1>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 76319 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
> sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> pciide0: primary channel interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 7, Ultra-DMA mode 5 (Ultra/100) (using
> DMA data
> transfers)
> pciide0: secondary channel configured to compatibility mode
> atapibus0 at pciide0 channel 1: 2 targets
> cd0 at atapibus0 drive 0: <HL-DT-ST CD-ROM GCR-8520B, , 1.00> type 5
> cdrom remov
> able
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2
> pciide0: secondary channel interrupting at irq 15
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
> vr0: interrupting at irq 11
> vr0: Ethernet address: 00:0a:e6:48:ee:03
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isa0 at pcib0
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> lpt0 at isa0 port 0x378-0x37b irq 7
> pcppi0 at isa0 port 0x61
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> isapnp0: no ISA Plug 'n Play devices found
> apm0 at mainbus0: Power Management spec V1.2
> biomask e745 netmask ef45 ttymask ffc7
> Kernelized RAIDframe activated
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> 
> 

a jak pod innymi systemami?
a jak z inną sieciówką?
to samo?

pozdr.

-- 
Janusz Pruszewicz