Subject: Sun Ultra 5 and DLT tape station looking for a new home
To: None <,>
From: Jesper Skriver <>
List: regional-london
Date: 03/05/2006 22:08:44
Content-Type: multipart/mixed; boundary="ikeVEW9yuYc//A+q"
Content-Disposition: inline

Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline


I have a Sun Ultra 5, 400 MHz, 512 MB memory, 8 GB ATA disk, CWRW
drive, Dual Ultra160 SCSI adapter and keyboard available for
anyone that can put it to good use.

I also have a DLT4000 SCSI tape station, it comes with a cleaning
tape, but no other tapes,I have not used it for a couple of years,
and cannot test it as I have lost the SCSI cable.

Puctures of both are available at:

Both are free to pickup in Reading, or if the recipient will pay
postage, I can post them anywhere in the UK.

If nobody wants them, they will be e-scapped at the end of the
month, where I am moving.

Jesper Skriver

PS: I've attached a dmesg from the U5 (running FreeBSD)

Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.txt"
Content-Transfer-Encoding: quoted-printable

> dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #2: Sun Feb  1 19:37:10 GMT 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04cc000.
Timecounter "tick" frequency 400000000 Hz quality 0
real memory  =3D 536870912 (512 MB)
avail memory =3D 510558208 (486 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (400.00 MHz CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [FAST]
DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff a=
t device 1.0 on pci1
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x1=
40072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 =
(no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebu=
sab0: [FAST]
sabtty0: <ttya> on sab0
sabtty1: <ttyb> on sab0
sabtty1: console 9600,8,n,1,-
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14=
003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0=
x14003023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80f92d5a
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x14007040=
0f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver=
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on =
hme0: Ethernet address: 08:00:20:f9:2d:5a
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 WDMA2 controller> port 0xc00020-0xc0002f,0xc00018-0xc0001=
b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 at device 3.0 on pc=
atapci0: [MPSAFE]
ata2: at 0xc00000 on atapci0
ata2: [MPSAFE]
ata3: at 0xc00010 on atapci0
ata3: [MPSAFE]
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x400-0x4ff mem 0x2000-0x2=
fff at device 1.0 on pci2
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x800-0x8ff mem 0x4000-0x4=
fff at device 1.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs
Timecounters tick every 10.000 msec
ad0: 8693MB <ST39111A> [17662/16/63] at ata2-master WDMA2
acd0: CDRW <CRD-8322B> at ata3-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0a    =20


Content-Type: application/pgp-signature
Content-Disposition: inline

Version: GnuPG v1.4.2 (FreeBSD)