Well, I'm not that interested in the Alpha but a meet sounds like a good 
idea.

Week of the 28th is good for me . . .

Anyone else ?

adrian.

Jonathan Perkin wrote:

> Hi,
> 
> I'm trying to free up some space at work, and have an Alpha
> Server 400/166 for anyone who can give it some warmth and love,
> preferably if you are going to use it for NetBSD/alpha devel or
> maybe a pkgsrc bulk build box for an unsupported platform.
> 
> I can bring it along to a NetBSD/london meet (I'm away next
> week, but anyone fancy a get-together after that?).  It's
> sturdy, well built, and will happily serve you for whatever you
> throw at it - if a little slowly.  Great box.  You can buy me a
> beer for the lot.
> 
> I netbooted latest -current onto it this morning, and have
> attached the dmesg.  Unfortunately, everything in it is
> supported! :)
> 
> Cheers,
> 
> 
> 
> ------------------------------------------------------------------------
> 
> consinit: not using prom console
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 2.0F (GENERIC) #0: Tue Jun 15 13:48:21 UTC 2004
> 	cyber@b1.urc.uninett.no:/usr/users/cyber/autobuild/HEAD/alpha/OBJ/usr/users/cyber/autobuild/HEAD/src/sys/arch/alpha/compile/GENERIC
> AlphaServer 400 4/166, 166MHz, s/n 
> 8192 byte page size, 1 processor.
> total memory = 65536 KB
> (2000 KB reserved for PROM, 63536 KB used by NetBSD)
> avail memory = 54560 KB
> mainbus0 (root)
> cpu0 at mainbus0: ID 0 (primary), 21064-0
> apecs0 at mainbus0: DECchip 21071 Core Logic chipset
> apecs0: DC21071-CA pass 2, 64-bit memory bus
> apecs0: DC21071-DA pass 2
> pci0 at apecs0 bus 0
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> siop0 at pci0 dev 6 function 0: Symbios Logic 53c810 (fast scsi)
> siop0: interrupting at isa irq 11
> scsibus0 at siop0: 8 targets, 8 luns per target
> sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x03)
> tga0 at pci0 dev 11 function 0: DC21030 step C, board type T8-02
> tga0: 1024 x 768, 8bpp, Bt485 RAMDAC
> tga0: interrupting at isa irq 5
> wsdisplay0 at tga0 (kbdmux ignored)
> tlp0 at pci0 dev 12 function 0: DECchip 21040 Ethernet, pass 2.3
> tlp0: interrupting at isa irq 9
> tlp0: Ethernet address 08:00:2b:e5:81:ff
> tlp0: 10baseT, 10baseT-FDX, 10base5, manual
> isa0 at sio0
> lpt0 at isa0 port 0x3bc-0x3bf irq 7
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> com0: console
> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> pckbc0 at isa0 port 0x60-0x64
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: PC speaker
> spkr0 at pcppi0
> isabeep0 at pcppi0
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> Kernelized RAIDframe activated
> scsibus0: waiting 2 seconds for devices to settle...
> sd0 at scsibus0 target 2 lun 0: <SEAGATE, ST15150N, 9107> disk fixed
> sd0: 4095 MB, 3712 cyl, 21 head, 107 sec, 512 bytes/sect x 8388315 sectors
> sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
> st0 at scsibus0 target 5 lun 0: <WangDAT, Model 3100, 03.0> tape removable
> st0: drive empty
> st0: async, 8-bit transfers
> root on sd0a dumps on sd0b
> root file system type: ffs