Hallo!

Ich hab hier ne Sun Ultra1 bekommen, mit 2x 4.5GB Festplatte.
Auf disk0 hab ich Solaris 8 und auf disk1 NetBSD 1.6.1 laufen.

dmesg sagt:

console is keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.1 (GENERIC) #0: Mon Apr  7 10:27:16 UTC 2003
   
autobuild@cs20.apochromatic.org:/autobuilder/build/netbsd-1-6/sparc64/OBJ/autobuilder/build/netbsd-1-6/src/sys/arch/sparc64/compile/GENERIC
total memory = 320 MB
avail memory = 287 MB
using 2060 buffers containing 16480 KB of memory
bootpath: /sbus@1f,0/SUNW,fas@e,8800000/sd@1,0
mainbus0 (root): SUNW,Ultra-1
cpu0 at mainbus0: SUNW,UltraSPARC @ 166.975 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 512K external
(64 b/l)
timer0 at mainbus0 addr 0xfffc7c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTSB: 1179a000 to 1179c000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13: CS4231A
audio0 at audiocs0: full duplex
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 80942902
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zstty2 at zs1 channel 0 (console input)
kbd0 at zstty2 (console input)
zstty3 at zs1 channel 1
ms0 at zstty3
sc at sbus0 slot 15 offset 0x1300000 not configured
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: FAS366/HME, 40MHz,
SCSI ID 7
scsibus0 at esp0: 16 targets, 8 luns per target
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: Sun Happy Meal
Ethernet (SUNW,hme)
hme0: Ethernet address 08:00:20:94:29:02
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: dma rev unknown
(0x20000000)
SUNW,ffb at mainbus0 addr 0xfec00000 not configured
pcons at mainbus0 not configured
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST34572WC, 0784> SCSI2 0/direct
fixed
sd0: 4340 MB, 6300 cyl, 8 head, 176 sec, 512 bytes/sect x 8888924 sectors
esp0: wide mode 1
sd0: sync (100.0ns offset 15), 16-bit (20.000MB/s) transfers, tagged
queueing
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST34573WC, 6244> SCSI2 0/direct
fixed
sd1: 4340 MB, 7501 cyl, 5 head, 237 sec, 512 bytes/sect x 8888924 sectors
esp0: wide mode 1
sd1: sync (100.0ns offset 15), 16-bit (20.000MB/s) transfers, tagged
queueing
cd0 at scsibus0 target 6 lun 0: <PIONEER, CD-ROM DR-U16S, 1.01> SCSI2
5/cdrom removable
cd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers
Kernelized RAIDframe activated
root on sd1a dumps on sd1b
root file system type: ffs


Frage 1: Wie kann ich das Tastatur-Layout aendern?
wsconsctl -w encoding=de sagt: /dev/wskbd0: No such file or directory
ein cd /dev && ./MAKEDEV all  generiert diese nicht.

Frage 2: Um das ffb zu unterstuetzen ist wohl ein Kernel-Uebersetzen
angesagt oder?
Es ist ne Creator 2D Grafikkarte eingebaut.

Frage 3: Was ist generell auf sparc64 zu empfehlen: -1-6 oder -current?


-- 
CU,

Christoph Egger
E-Mail: Christoph_Egger@gmx.de

GMX ProMail (250 MB Mailbox, 50 FreeSMS, Virenschutz, 2,99 EUR/Monat...)
jetzt 3 Monate GRATIS + 3x DER SPIEGEL +++ http://www.gmx.net/derspiegel +++