Port-zaurus archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: NetBSD/zaurus installation tips

Here is dmesg of my SL-C1000:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.51 (GENERIC) #0: Fri May 20 18:13:08 JST 2011
total memory = 65536 KB
avail memory = 58112 KB
mainbus0 (root)
cpu0 at mainbus0: PXA27x rev 7 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB/32B 32-way Instruction cache
cpu0: 32KB/32B 32-way write-back-locking Data cache
pxaip0 at mainbus0: PXA2x0 Onchip Peripheral Bus
pxaip0: CPU clock = 416.004 MHz
pxaip0: kernel is configured for PXA270, cpu type is PXA270
pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000-0x40e0014f: GPIO Controller
com0 at pxaip0 addr 0x40100000-0x4010001f intr 22: ns16550a, working fifo
com1 at pxaip0 addr 0x40200000-0x4020001f intr 21: ns16550a, working fifo
com2 at pxaip0 addr 0x40700000-0x4070001f intr 20: ns16550a, working fifo
ohci0 at pxaip0 addr 0x4c000000-0x4c00006f intr 3
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
saost0 at pxaip0 addr 0x40a00000-0x40a0001f
saost0: SA-11x0 OS Timer
lcd0 at pxaip0: PXA2x0 LCD controller
lcd0: console
wsdisplay0 at lcd0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
pxadmac0 at pxaip0 addr 0x40000000-0x400002ff intr 25: DMA Controller
pxapcic0 at pxaip0: 2 slots
pcmcia0 at pxapcic0
pcmcia1 at pxapcic0
pxartc0 at pxaip0 addr 0x40900000-0x4090000f: Real-time Clock
pxamci0 at pxaip0 addr 0x41100000-0x41100047: MMC/SD Controller
pxamci0: using DMA transfer
sdmmc0 at pxamci0
scoop0 at pxaip0: PCMCIA/GPIO controller
scoop1 at pxaip0: PCMCIA/GPIO controller
zssp0 at pxaip0
zkbd0 at pxaip0
wskbd0 at zkbd0: console keyboard, using wsdisplay0
ztp0 at pxaip0
wsmouse0 at ztp0 mux 0
zaudio0 at pxaip0: I2C, I2S, WM8750 Audio
audio0 at zaudio0: half duplex, playback, capture, mmap, independent
zrc0 at pxaip0: CE-RH2 remote control
wskbd1 at zrc0 mux 1
wskbd1: connecting to wsdisplay0
zapm0 at pxaip0: pseudo power management module
apmdev0 at zapm0: Power Management spec V1.2
zusb0 at pxaip0: USB Mode detection
clock: hz=100 stathz=64
pcmcia0: card appears to have bogus CIS
ne0 at pcmcia1 function 0: <Ethernet, CF Size PC Card, 1.0,  >
ne0: Ethernet address 00:90:cc:43:fb:dc
uhub0 at usb0: PXA27x OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ld0 at sdmmc0: <SD08G>
ld0: 7595 MB, 3857 cyl, 64 head, 63 sec, 512 bytes/sect x 15554560 sectors
ld0: 4-bit width, bus clock 19.500 MHz
boot device: <unknown>
root device: ld0a
dump device (default ld0b): 
file system (default generic): 
root on ld0a dumps on ld0b
root file system type: ffs
init path (default /sbin/init): 
init: trying /sbin/init

Izumi Tsutsui

Home | Main Index | Thread Index | Old Index