[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: XEN on NetBSD-6.1 amd64.
On Thu, Aug 01, 2013 at 11:39:57AM -0300, Adiel de Lima Ribeiro wrote:
> Good morning.
> Sorry for my english, it isn't very whell.
> Let's start.
> I instaled NetBSD stable from the link:
> nyftp.netbsd.org/pub/NetBSD-daily/netbsd-6/201307150Z and later I just
> instaled netbsd-XEN3_DOM0 from the same place. So, then I instaled
> xenkernel42-4.2.2 and xentools42-4.2.2nb3 with pkg_add from the link:
> I let the /usr/pkg/etc/xen/xend-config.sxp with the default
> configuration, I'm working with bridge network, so, then I created the
> bridge in /etc/ifconfig.bridge0.
> Im working with xl framework.
> I created NetBSD and FreeBSD virtual machines, the relevant portion of
> configuration file is show bellow:
> vif = [ 'bridge=bridge0, type=ioemu, model=e1000' ]
> In both virtual machines, I see the network card, but when I configure
> an ip address, I can't communicate with my network.
> When I type brconfig -a, I have these results show bellow:
> bridge0: flags=41<UP,RUNNING>
> priority 32768 hellotime 2 fwddelay 15 maxage 20
> ipfilter disabled flags 0x0
> xvif2i0 flags=3<LEARNING,DISCOVER>
> port 5 priority 128
> tap0 flags=3<LEARNING,DISCOVER>
> port 4 priority 128
> bce0 flags=3<LEARNING,DISCOVER>
> port 1 priority 128
> Everything appears to be normal, but I still don't have communication
> with my network from my Vms. What Am I doing wrong?
are xvif2i0 and tap0 up ?
You could also try running tcpdump on these interfaces (not on the bridge
itself, this won't work) and see how packets are going in and out.
Manuel Bouyer <bouyer%antioche.eu.org@localhost>
NetBSD: 26 ans d'experience feront toujours la difference
Main Index |
Thread Index |