[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
amd64 xen3_dom0 failing to boot - stalls (generic boots fine)
It seems the latest update has caused my first ever stalled boot with no
The system is a dell sc430 running amd64 xen3. The system is completely
up-to-date (current) as of an hour ago. It has been running amd64 xen3
almost since amd64 became usable with xen. The configuration is pretty
standard/basic, I'm almost positive it's not a config issue unless
something config related changed recently (between .5 and .7).
When booting, it gets up to 'trying ffs' then stalls. I removed log from
fstab and it seemed to get slightly further but it may just have been
coincidence as I believe it managed to get a little further previously
with no change to any files.
A generic kernel boots fine and has no issues at all.
dom0 is being allocated ~256MB fyi.
I should probably note that I believe I witnessed the same problem
within a current amd64 domu as well, before I rebooted the dom0.
Please CC this address on replies as it's not subscribed to either list.
If there is more information required please ask. Any assistance
Main Index |
Thread Index |