Dans l'épisode précédent (Tue, Jan 03 2006 - 15:26), Quentin Garnier nous apprenait que :
> On Tue, Jan 03, 2006 at 03:12:15PM +0100, Joel CARNAT wrote:
> > Hi,
> > 
> > having a DELL PowerEdge 2850 lying in a cupboard, I decided to try
> > NetBSD/xen on it. Installation of 3.0/i386 worked OK. I followed Xen
> > HOWTO and it seems the Xen kernel don't access the disk - it doesn't
> > find the root automatically, don't want to use 'sd0a' as I tell him and
> > sd0 don't appear in the 'root device' choices.
> > 
> > From /i386, the hardware is :
> > mpt0 at pci2 dev 5 function 0: LSI Logic 53c1030 Ultra320 SCSI
> > mpt0: interrupting at ioapic1 pin 2 (irq 7)
> > scsibus0 at mpt0: 16 targets, 8 luns per target
> > mpt1 at pci2 dev 5 function 1: LSI Logic 53c1030 Ultra320 SCSI
> > mpt1: interrupting at ioapic1 pin 1 (irq 3)
> > scsibus1 at mpt1: 16 targets, 8 luns per target
> > scsibus0: waiting 2 seconds for devices to settle...
> > scsibus1: waiting 2 seconds for devices to settle...
> > sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST3146807LC, DS09> disk fixed
> > sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST3146807LC, DS09> disk fixed
> > sd2 at scsibus0 target 2 lun 0: <SEAGATE, ST3146807LC, DS09> disk fixed
> > ses0 at scsibus0 target 6 lun 0: <PE/PV, 1x6 SCSI BP, 1.0> processor
> > fixed
> > 
> > My menu.lst is :
> > title NetBSD/xen
> >         root    (hd0,0)
> >         kernel  (hd0,0,a)/xen.gz dom0_mem=65536
> >         module  (hd0,0,a)/netbsd console=tty0
> > 
> > Grub and Xen are installed from pkgsrc-2005Q4.
> > 
> > Is this SCSI card known to work ?
> > Any idea to have it working ?
> 
> What NetBSD/Xen kernel are you using?  It probably doesn't have the
> relevant driver compiled in.
> 

Well, I took kern-XEN0.tgz from NetBSD-3.0 release and
xentools20-2.0.7nb5, xenkernel20-2.0.7 (from pkgsrc-2005Q4).

Would this only be a matter of add mpt? in a Xen config file and
recompiling ?

	Jo