Hello. 
I'm not really sure if this is the best place to make this question and
if it isn't, I apologize.
Anyway, I built the simh Vax simulator and tried to boot NetBSD 1.6.2 in
it. Problem is that after NetBSD finds the root partition it won't do
anything else.
I'm new to this port, so I'm really stuck, mostly because I know nothing
about it.
I tried simh v3.0-2 and 2.10-4 and none worked.

Here is the output:
$ cat netbsd.boot 
load -r /usr/pkg/share/simh/ka655.bin
at nvr ka655.nvr
set cpu 64m
set rq0 ra92
at rq0 netbsd.dsk
set rq1 cdrom
at rq1 vaxcd.iso
boot cpu
$ simh-vax netbsd.boot 

VAX simulator V3.0-2
NVR: buffering file in memory


KA655-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
>>>boot dua1:
(BOOT/R5:0 DUA1



  2..
-DUA1
  1..0..


>> NetBSD/vax boot [1.11 Wed Feb 11 09:14:20 UTC 2004] <<
>> Press any key to abort autoboot 0                     
getdisklabel: no disk label         
nfs_open: must mount first.
2371692+117752=0x25fe00    
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.       
Copyright (c) 1982, 1986, 1989, 1991, 1993           
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.2 (INSTALL) #0: Wed Feb 11 09:24:13 UTC 2004
    autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/vax/OBJ/autobuild/netbsd-1-6-PATCH002/src/sys/arch/vax/compile/INSTALL

MicroVAX 3800/3900
cpu: KA655, CVAX microcode rev 6 Firmware rev 83
total memory = 65468 KB                         
avail memory = 56468 KB
using 844 buffers containing 3376 KB of memory
mainbus0 (root)                               
ibus0 at mainbus0
uba0 at ibus0: Q22
dz1 at uba0 csr 160100 vec 304 ipl 15
mtc0 at uba0 csr 174500 vec 774 ipl 15
mscpbus0 at mtc0: version 5 model 3   
mscpbus0: DMA burst size set to 4  
mt0 at mscpbus0 drive 0: TK50    
mt1 at mscpbus0 drive 1: TK50
mt2 at mscpbus0 drive 2: TK50
mt3 at mscpbus0 drive 3: TK50
uda0 at uba0 csr 172150 vec 770 ipl 15
mscpbus1 at uda0: version 3 model 3   
mscpbus1: DMA burst size set to 4  
ra0 at mscpbus1 drive 0: RA92    
ra1 at mscpbus1 drive 1: RRD40
ra2 at mscpbus1 drive 2: RD54 
rx0 at mscpbus1 drive 3: RX50
qe0 at uba0 csr 174440 vec 764 ipl 15
qe0: delqa, hardware address 08:00:2b:aa:bb:cc
md0: internal 1536 KB image area              
boot device: ra1                
root on md0a dumps on md0b
Clock has gained 141 days - CHECK AND RESET THE DATE.
root file system type: ffs                           


And does nothing more than making my load go up :)
Is this normal ? Is it beacause of NetBSD 1.6.2 ? Will it work ok with
1.5.2 as the emulator howto said ?

Thanks in advance.
Rui Paulo

-- 
  "Simplicity is the ultimate 
    sophistication." 
    -- Leonardo da Vinci