Hi!

I had another go with a 3100/80 + 1.6:

>>> show conf

KA47-A V1.2-343-V4.0
08-00-2B-3B-DB-70
40MB

DEVNBR    DEVNAM           INFO
------    --------    --------------------------
     1         NVR    OK
     3          DZ    OK
     4       CACHE    OK
     5         MEM    OK
                      40MB = S0/1=8MB, S2/3=32MB, S4/5=0MB 
     6         FPU    OK
     7          IT    OK
     8         SYS    OK
     9          NI    OK
    10        SCSI    OK
                      2-RZ26L   3-RZ26    4-RRD42   6-INITR    

 >>> show dev

  VMS/VMB      ADDR      DEVTYPE    NUMBYTES     RM/FX    WP    DEVNAM      REV
  -------      ----      -------    --------     -----    --    ------      ---
  ESA0         08-00-2B-3B-DB-70
  DKA200       A/2/0     DISK         1.05GB      FX            RZ26L       440C
  DKA300       A/3/0     DISK         1.05GB      FX            RZ26        T386
  DKA400       A/4/0     RODISK      ......       RM      WP    RRD42       4.5d
 ..HostID..    A/6       INITR



 >>> boot esa0

 ^Q
-ESA0
>> NetBSD/vax boot [Jan  6 2002 22:13:30] <<
>> Press any key to abort autoboot 0
Trying BOOTP
Using IP address: 192.168.6.2
myip:  (192.168.6.2)
root addr=192.168.6.211 path=/export/vax/root
open netbsd.vax: No such file or directory
> boot netbsd
1517664+210032 [79+153168+110527]=0x1e6510
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (GENERIC) #0: Wed Sep 11 10:14:37 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/vax/OBJ/autobuild/src/sys/arch/vax/compile/GENERIC

MicroVAX 3100/80
cpu0: KA47
cpu: turning on floating point chip
total memory = 40696 KB
avail memory = 34088 KB
using 534 buffers containing 2136 KB of memory
mainbus0 (root)
vsbus0 at mainbus0
vsbus0: 32K entry DMA SGMAP at PA 0x6a0000 (VA 0x806a0000)
vsbus0: interrupt mask 0
dz0 at vsbus0 csr 0x200a0000 vec 124 ipl 15 maskbit 4
dz0: 4 lines
lkms0 at dz0
wsmouse0 at lkms0 (mux ignored)
asc0 at vsbus0 csr 0x200c0080 vec 774 ipl 15 maskbit 0
asc0: NCR53C94, 25MHz, SCSI ID 6
scsibus0 at asc0: 8 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <DEC, RZ26L    (C) DEC, 440C> SCSI2 0/direct fixed
sd0: 1001 MB, 3117 cyl, 8 head, 82 sec, 512 bytes/sect x 2050860 sectors
sd0: sync (160.0ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
sd1 at scsibus0 target 3 lun 0: <DEC, RZ26     (C) DEC, T386> SCSI2 0/direct fixed
sd1: 1001 MB, 2570 cyl, 14 head, 57 sec, 512 bytes/sect x 2050860 sectors
sd1: sync (160.0ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <DEC, RRD42   (C) DEC, 4.5d> SCSI2 5/cdrom removable
cd0: async, 8-bit transfers
Kernelized RAIDframe activated
sd0: no disk label
sd1: no disk label
boot device: <unknown>
root device:

Where'd the lance go ?

TIA,
-- 
jht