On Mon, 4 Jun 2001, Chuck McManis wrote:
> Looking from right to left, board order should be:
> 
> <--- top of the cabinet.
> 
> Slot    Contents
>          +-------------+------------+
> 1       |          M7620           | Q/CD
>          +-------------+------------+
> 2       |          M7621           | Q/CD
>          +-------------+------------+
> 3       |          M7621           | Q/CD
>          +-------------+------------+
> 4       |  M7546      |   *EMPTY*  | Q/CD
>          +-------------+------------+
> 5       |  M3106      |  M7516-YM  | Q/Q
>          +-------------+------------+
> 6       |  *EMPTY*    |   M7555    | Q/Q
>          +-------------+------------+
> 7       |  *EMPTY*    |   *EMPTY*  | Q/Q
>          +-------------+------------+
>              ...             ...
>          +-------------+------------+
> 12      |  *EMPTY*    |   *EMPTY*  | Q/Q
>          +-------------+------------+
> 13      |   RQDX      |              *special*
>          +-------------+
> 
> Make sure the M7555 is connected to the distribution card and that card is 
> connected to the drives in the front. Also the card connects to a panel of 
> switches on the front in the lower left corner.
> 
> The DELQA (M7516-YM) should have a cable connecting to its cab it in the 
> back, and the CPU card should connect to its bulkhead back there as well. 
> The M3106 connects to the 4 port panel, and the M7546 connects to the TK50.
> 
> Make sure that the cables do not get crimped by the door, nor have they 
> been damaged by being shut between the door and a latch pin.
> 
> --Chuck
> 

Thank you *so* much!  I'll try it and let you know how/if it works!
-Linc Fessenden

-- 
 12:23pm  up 47 days, 21 min,  4 users,  load average: 1.10, 1.26, 1.37