Subject: 1.6 Beta snapshot
To: None <port-sun3@netbsd.org>
From: None <scotts@smallie.net>
List: port-sun3
Date: 07/12/2002 00:50:17
Below is the boot messages of the miniroot from 
releng.netbsd.org:pub/NetBSD-daily/200207080000/sun3/

It appears that init is missing from the miniroot.fs.
Has anyone encounter this error before?
Is there another explaination besides the miniroot.fs is 
corrupt and missing init?

I have three of the old beasts I am attempting resurect 
from the ashes.  

-scotts


>b sd(,,1) -s
Boot: sd(0,0,1) -s
>> NetBSD/sun3 ufsboot [1.11]
ufsboot: trying netbsd
open netbsd: No such file or directory
ufsboot: trying netbsd.old
open netbsd.old: No such file or directory
ufsboot: trying netbsd.sun3x
846036+129716 [77968+54947]=0x10ec80
starting program at 0x4000
console is ttya
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6_BETA4 (INSTALL3X) #0: Wed Jul 10 04:23:30 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/sun3/OBJ/autobuild/src/sys/arch/sun3/compile/INSTALL3X
Model: sun3x 80
fpu: mc68882
total memory = 16384 KB
avail memory = 14032 KB
using 115 buffers containing 920 KB of memory
mainbus0 (root)
obio0 at mainbus0
iommu0 at obio0 addr 0x60000000
memerr0 at obio0 addr 0x61001000 ipl 7: (Parity memory)
intreg0 at obio0 addr 0x61001400
zsc0 at obio0 addr 0x62000000 ipl 6: (softpri 3)
kbd0 at zsc0 channel 0: baud rate 1200
zsc0:  channel 1 not configured
zsc1 at obio0 addr 0x62002000 ipl 6: (softpri 3)
zstty0 at zsc1 channel 0 (console i/o)
zstty1 at zsc1 channel 1
eeprom0 at obio0 addr 0x64000000
clock0 at obio0 addr 0x640007f8 ipl 5
le0 at obio0 addr 0x65002000 ipl 3: address 08:00:20:b7:24:8d
le0: 8 receive buffers, 2 transmit buffers
dma0 at obio0 addr 0x66001000 ipl 2: rev 0
esp0 at obio0 addr 0x66000000 ipl 2: ESP100, 20MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40: (softpri 2) chip 82072
enabling interrupts
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <HP, 1.050 GB #A, 9842> SCSI2 0/direct fixed
sd0: 1001 MB, 2700 cyl, 9 head, 84 sec, 512 bytes/sect x 2051460 sectors
sd0: async, 8-bit transfers
sd1 at scsibus0 target 3 lun 0: <iomega, jaz 1GB, H.71> SCSI2 0/direct removable
sd1: 1021 MB, 1021 cyl, 64 head, 32 sec, 512 bytes/sect x 2091050 sectors
sd1: async, 8-bit transfers
cd0 at scsibus0 target 4 lun 0: <HP, CD-Writer 6020, 1.07> SCSI2 5/cdrom removable
cd0: async, 8-bit transfers
boot device: sd0b
root on sd0b dumps on sd0b
WARNING: bad date in battery clock -- CHECK AND RESET THE DATE!
root file system type: ffs
init: not found
panic: no init
syncing disks... done

dumping to dev 7,1 offset 32656
dump succeeded
rebooting...
Boot: sd(0,0,0)



-- 
Scott Smallie 	     Office: 314-632-6662   email: scotts@smallie.net
Systems Engineer			    http://www.smallie.net/~scotts
           "Wit is educated Insolence." -Aristotle