Subject: Re: 3/80 install problem
To: Jeremy Cooper <jeremy@broder.com>
From: Rick Copeland <rickgc@calweb.com>
List: port-sun3
Date: 02/12/1998 06:01:28
At 11:10 PM 2/11/98 -0800, Jeremy Cooper wrote:
>> [ long output from 1.2 install script ]
>
>Show us the dmesg output for your drive.  I suspect your disklabel has a
>partition which extends beyond the range supported by your drive.
>
>-J
>

Jeremy,

I hope this is what you mean by "dmesg". If not please email me back.

**************************************************************************
Cmd==>q
>b st()

st: Device not found.
>st()
FC5 space
>b st()

st: Device not found.
>b st()
Boot: st(0,20,0)
>> NetBSD tapeboot [$Revision: 1.1.1.1 $]
517288+289004+52612+[43740+41018]=0xe6632
Starting program at 0x4000
console is ttya
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.2E (RAMDISK) #2: Fri May 23 17:11:35 PDT 1997
    jeremy@mobeius:/usr/home/netbsd/src/sys/arch/sun3x/compile/RAMDISK
Model: Sun 3/80 (hostid 42010203)
fpu: mc68882
real mem = 16777216
avail mem = 14508032
using 115 buffers containing 942080 bytes of memory
mainbus0 (root)
obio0 at mainbus0
memerr0 at obio0 addr 0x61001000 ipl 7: (Parity memory)
intreg0 at obio0 addr 0x61001400
zsc0 at obio0 addr 0x62000000 ipl 6: (softpri 3)
kbd0 at zsc0 channel 0
ms0 at zsc0 channel 1
zsc1 at obio0 addr 0x62002000 ipl 6: (softpri 3)
zstty0 at zsc1 channel 0 (console)
zstty1 at zsc1 channel 1
zsc1: enabling zs interrupts
eeprom0 at obio0 addr 0x64000000
idprom0 at obio0 addr 0x640007d8
clock0 at obio0 addr 0x640007f8 ipl 5
iommu0 at obio0 addr 0x60000000: range 16MB
le0 at obio0 addr 0x65002000 ipl 3: address 08:00:20:07:7a:b9
le0: 8 receive buffers, 2 transmit buffers
esp0 at obio0 addr 0x66000000 ipl 2: ESP100, 20MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, LXT-213S SUN0207, 4.24> SCSI1 0/direct fi
xed
sd0: 202MB, 1310 cyl, 7 head, 45 sec, 512 bytes/sec
st0 at scsibus0 targ 4 lun 0: <WANGTEK, 5525ES SCSI, > SCSI2 1/sequential remova
ble
st0: density code 0x0, 1024-byte blocks, write-enabled
fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40: (softpri 2) chip 82072
obmem0 at mainbus0
bwtwo0 at obmem0 addr 0x50400000 ipl 4 (1152x900)
enabling interrupts
 fixed, 512 blocksboot device: <unknown>
WARNING: clock lost 3009 days -- CHECK AND RESET THE DATE!
WARNING: no swap space found

        Welcome to the NetBSD/sun3x RAMDISK root!
*************************************************************************
Thanks,
Rick Copeland