-----BEGIN PGP SIGNED MESSAGE-----


  My previous definition of success meant... kernel load and
started. My ramdisk root isn't happy though. I've tried both
rdsetroot and mdsetimage.

>b le()
Boot: le(0,0,0) 
Using IP Address 205.233.54.131 = CDE93683
Booting from tftp server at 205.233.54.136 = CDE93688
Downloaded 15360 bytes from tftp server.

>> NetBSD netboot [$Revision: 1.5 $]
Using IP Address 205.233.54.131 = CDE93683
net_open: client addr: 205.233.54.131
net_open: client name: merry.sandelman.ottawa.on.ca
net_open: subnet mask: 255.255.255.0
net_open: net gateway: 205.233.54.136
net_open: server addr: 205.233.54.136
net_open: server path: /export/root/merry
556324+2125628+64104+[46260+50656]=0x2b6160
Starting program at 0x4000
console is ttya
zs_kgdb_init: attaching ttyb at 19200 baud
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.2G (SSWRD) #2: Sun Jun 15 17:40:09 EDT 1997
    mcr@amaterasu:/w/netbsd/src/sys/arch/sun3/compile/SSWRD
Model: Sun 3/60 (hostid 1700d5ac)
fpu: mc68881
real mem = 16760832
avail mem = 12804096
using 115 buffers containing 942080 bytes of memory
mainbus0 (root)
obio0 at mainbus0
zsc0 at obio0 addr 0x0 level 6: (softpri 3)
kbd0 at zsc0 channel 0
ms0 at zsc0 channel 1
zsc1 at obio0 addr 0x20000 level 6: (softpri 3)
zstty0 at zsc1 channel 0 (console)
                                  zstty1 at zsc1 channel 1 (kgdb)
zsc1: enabling zs interrupts
eeprom0 at obio0 addr 0x40000
clock0 at obio0 addr 0x60000 level 5
memerr0 at obio0 addr 0x80000 level 7: (Parity memory)
intreg0 at obio0 addr 0xa0000
le0 at obio0 addr 0x120000 level 3: address 08:00:20:06:8a:fa
le0: 8 receive buffers, 2 transmit buffers
si0 at obio0 addr 0x140000 level 2: options=0x1000f
scsibus0 at si0: 8 targets
obmem0 at mainbus0
enabling interrupts
 fixed, 4096 blocksboot device: le0
device md0 (0xd00) not configured
root device (default md0a): 
dump device (default md0b): 
file system (default ffs): 
root on md0a dumps on md0b
warning: no /dev/console
init: not found
panic: no init
syncing disks... done
Kernel rebooting...

Diagnostic Auto-boot in progress...
Invalid device = ''
>
  
  I'm suspicious about the md0 --- not configured, then it goes ahead
and uses it, and it mounts, but it comes up empty or something.

   :!mcr!:            |  Network security programming, currently
   Michael Richardson | on contract with DataFellows F-Secure IPSec
 WWW: mcr@sandelman.ottawa.on.ca. PGP key available.

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia
Charset: latin1
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQB1AwUBM6SUTKZpLyXYhL+BAQGu0AL/SwuA2k/yk2xZQ8vlRc4H9DU5VYCiKshk
sxHFpG6OPzAv/DrlX8zRzMc/k9Kmi9xMFCmfRZLF1vKzx+/tElRmnV7fXdfoOoIO
AeDLmyztoQDtPLyucLWtVa0UV0TVeM3a
=D48b
-----END PGP SIGNATURE-----