I'm trying to get NetBSD sun3 to install on a 3/60 with a micropolis 1325
connected via an Adaptec md21, and I get the netbsd-rd kernel loaded, but
then recieve the following:


 si0 at obio0 addr 0x140000 level 2: options=1
 scsibus0 at si0
 si0: parity error!
 si0: parity error!
 si0: parity error!
 si0: parity error!
 ncr5380_machine: unexpected disconnect.
 si0: parity error!
 si0: parity error!
 si0: parity error!
 si0: parity error!
 si0: parity error!
 ncr5380_machine: unexpected disconnect.
 si0: parity error!
 st0 at scsibus0 targ 4 lun 0: <, , > SCSI1 1/sequential removable
 st0: rogue, drive empty

is the md21 not a supported device? Or is there some trick to getting it
working?

thanks
rob

------------------------------------------------------------------------------
"Off the keyboard, through the CPU, | deker@digex.net 
out the transceiver, down the rj45  | Systems Engineer
line, across the router, through    | 
the Hub, out the gateway.           |  
        Nothing but net."           | 
-----------------------------------------------------------------------------