Port-sparc64 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Kde4 issue
Hi,
this is my dmesg :
--------------------------------------------------------------------------------------------------------
udct-lune# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 2048 MB
avail memory = 1992 MB
kern.module.path=/stand/sparc64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Sun-Blade-1500 (Sun Blade 1500): hostid 83c4d94b
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1062 MHz, CPU id 0
cpu0: manuf 3e, impl 16, mask 24
cpu0: system tick frequency 12 MHz
cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
memory-controller at mainbus0 not configured
schizo0 at mainbus0: addr 4000f600000: "Tomatillo", version 0, ign 780,
bus A 0 to 0
schizo0: pci0 at schizo0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
flashprom at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p
pcfiic0 at ebus0 addr 320-321 ipl 2e
iic0 at pcfiic0: I2C bus
dbcool0 at iic0 addr 0x2e
dbcool0: ADM1031 dBCool(tm) Controller (rev 0x0083)
seeprom0 at iic0 addr 0x54: motherboard-fru-prom: size 8192
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem1: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
clock-generator at iic0 addr 0x69 not configured
power at ebus0 addr 800-82f ipl 20 not configured
com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, working fifo
com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, working fifo
dma at ebus0 addr 0-ffff not configured
alipm0 at pci0 dev 6 function 0: 223KHz clock
iic1 at alipm0: I2C bus
card-reader at iic1 addr 0x20 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller
Audio Device (rev. 0x02)
autri0: interrupting at ivec 7a4
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices
Phat Stereo
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller
(rev. 0x03)
ohci0: interrupting at ivec 7a7
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 11 function 0: Acer Labs M5237 USB 1.1 Host Controller
(rev. 0x03)
ohci1: interrupting at ivec 7a6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller
(rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 1f98 for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppm at mainbus0 not configured
schizo1 at mainbus0: addr 4000ff00000: "Tomatillo", version 0, ign 7c0,
bus B 0 to 0
schizo1: pci1 at schizo1
pci1: i/o space, memory space enabled
bge0 at pci1 dev 2 function 0: Broadcom BCM5703 Gigabit Ethernet
bge0: interrupting at ivec 37dc
bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address 00:03:ba:c4:d9:4b
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
radeonfb0 at pci1 dev 3 function 0: ATI Technologies Radeon 7000/VE QY
(rev. 0x00)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x00100000
radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1280x1024 60Hz
radeonfb0: port 1: physical 1280x1024 60Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (fb, vt100 emulation)
drm at radeonfb0 not configured
i2c at mainbus0 not configured
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 1062000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 12000000 Hz quality 200
No counter-timer -- using %stick at 12MHz as system clock.
uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0100, rev 1.10/1.05, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0
wd0: <ST380011A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-M1502, 5100505264, 1808>
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: vendor 0x0430 product 0x0005, rev 1.10/2.00, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0: console keyboard, using wsdisplay0
Kernelized RAIDframe activated
root on wd0a dumps on wd0b
root file system type: ffs
syncing disks... done
unmounted tmpfs on /var/shm type tmpfs
unmounted procfs on /proc type procfs
unmounted ptyfs on /dev/pts type ptyfs
unmounted kernfs on /kern type kernfs
cd0: detached
atapibus0: detached
brgphy0: detached
atabus1: detached
audio0: detached
bge0: detached
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 2048 MB
avail memory = 1992 MB
kern.module.path=/stand/sparc64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Sun-Blade-1500 (Sun Blade 1500): hostid 83c4d94b
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1062 MHz, CPU id 0
cpu0: manuf 3e, impl 16, mask 24
cpu0: system tick frequency 12 MHz
cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
memory-controller at mainbus0 not configured
schizo0 at mainbus0: addr 4000f600000: "Tomatillo", version 0, ign 780,
bus A 0 to 0
schizo0: pci0 at schizo0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
flashprom at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p
pcfiic0 at ebus0 addr 320-321 ipl 2e
iic0 at pcfiic0: I2C bus
dbcool0 at iic0 addr 0x2e
dbcool0: ADM1031 dBCool(tm) Controller (rev 0x0083)
seeprom0 at iic0 addr 0x54: motherboard-fru-prom: size 8192
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem1: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
clock-generator at iic0 addr 0x69 not configured
power at ebus0 addr 800-82f ipl 20 not configured
com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, working fifo
com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, working fifo
dma at ebus0 addr 0-ffff not configured
alipm0 at pci0 dev 6 function 0: 223KHz clock
iic1 at alipm0: I2C bus
card-reader at iic1 addr 0x20 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller
Audio Device (rev. 0x02)
autri0: interrupting at ivec 7a4
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices
Phat Stereo
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller
(rev. 0x03)
ohci0: interrupting at ivec 7a7
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 11 function 0: Acer Labs M5237 USB 1.1 Host Controller
(rev. 0x03)
ohci1: interrupting at ivec 7a6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller
(rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 1f98 for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppm at mainbus0 not configured
schizo1 at mainbus0: addr 4000ff00000: "Tomatillo", version 0, ign 7c0,
bus B 0 to 0
schizo1: pci1 at schizo1
pci1: i/o space, memory space enabled
bge0 at pci1 dev 2 function 0: Broadcom BCM5703 Gigabit Ethernet
bge0: interrupting at ivec 37dc
bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address 00:03:ba:c4:d9:4b
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
radeonfb0 at pci1 dev 3 function 0: ATI Technologies Radeon 7000/VE QY
(rev. 0x00)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x00100000
radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1280x1024 60Hz
radeonfb0: port 1: physical 1280x1024 60Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (fb, vt100 emulation)
drm at radeonfb0 not configured
i2c at mainbus0 not configured
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 1062000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 12000000 Hz quality 200
No counter-timer -- using %stick at 12MHz as system clock.
uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: device problem, disabling port 1
wd0 at atabus0 drive 0
wd0: <ST380011A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-M1502, 5100505264, 1808>
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0005, rev 1.10/2.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0: console keyboard, using wsdisplay0
Kernelized RAIDframe activated
root on wd0a dumps on wd0b
root file system type: ffs
syncing disks... done
unmounted tmpfs on /var/shm type tmpfs
unmounted procfs on /proc type procfs
unmounted ptyfs on /dev/pts type ptyfs
unmounted kernfs on /kern type kernfs
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 2048 MB
avail memory = 1992 MB
kern.module.path=/stand/sparc64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Sun-Blade-1500 (Sun Blade 1500): hostid 83c4d94b
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1062 MHz, CPU id 0
cpu0: manuf 3e, impl 16, mask 24
cpu0: system tick frequency 12 MHz
cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
memory-controller at mainbus0 not configured
schizo0 at mainbus0: addr 4000f600000: "Tomatillo", version 0, ign 780,
bus A 0 to 0
schizo0: pci0 at schizo0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
flashprom at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p
pcfiic0 at ebus0 addr 320-321 ipl 2e
iic0 at pcfiic0: I2C bus
dbcool0 at iic0 addr 0x2e
dbcool0: ADM1031 dBCool(tm) Controller (rev 0x0083)
seeprom0 at iic0 addr 0x54: motherboard-fru-prom: size 8192
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem1: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
clock-generator at iic0 addr 0x69 not configured
power at ebus0 addr 800-82f ipl 20 not configured
com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, working fifo
com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, working fifo
dma at ebus0 addr 0-ffff not configured
alipm0 at pci0 dev 6 function 0: 223KHz clock
iic1 at alipm0: I2C bus
card-reader at iic1 addr 0x20 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller
Audio Device (rev. 0x02)
autri0: interrupting at ivec 7a4
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices
Phat Stereo
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller
(rev. 0x03)
ohci0: interrupting at ivec 7a7
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 11 function 0: Acer Labs M5237 USB 1.1 Host Controller
(rev. 0x03)
ohci1: interrupting at ivec 7a6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller
(rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 1f98 for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppm at mainbus0 not configured
schizo1 at mainbus0: addr 4000ff00000: "Tomatillo", version 0, ign 7c0,
bus B 0 to 0
schizo1: pci1 at schizo1
pci1: i/o space, memory space enabled
bge0 at pci1 dev 2 function 0: Broadcom BCM5703 Gigabit Ethernet
bge0: interrupting at ivec 37dc
bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address 00:03:ba:c4:d9:4b
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
radeonfb0 at pci1 dev 3 function 0: ATI Technologies Radeon 7000/VE QY
(rev. 0x00)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x00100000
radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1280x1024 60Hz
radeonfb0: port 1: physical 1280x1024 60Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (fb, vt100 emulation)
drm at radeonfb0 not configured
i2c at mainbus0 not configured
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 1062000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 12000000 Hz quality 200
No counter-timer -- using %stick at 12MHz as system clock.
uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0100, rev 1.10/1.05, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0
wd0: <ST380011A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-M1502, 5100505264, 1808>
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: vendor 0x0430 product 0x0005, rev 1.10/2.00, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0: console keyboard, using wsdisplay0
Kernelized RAIDframe activated
root on wd0a dumps on wd0b
root file system type: ffs
udct-lune#
----------------------------------------- end
dmesg-----------------------------------------------------
Regards
philo
On 06/21/16 07:57, Martin Husemann wrote:
On Mon, Jun 20, 2016 at 10:53:04PM +0000, Philo wrote:
Hi,
i work with sun blade 1500 with video card XVR-100 ati radeon chipset.
i've compiled between 4 days kde4 but the server X doesn't start.
this is my output :
Just to make sure: you did use /usr/X11R7/bin/X, not something build from
pkgsrc?
In your dmesg output, how does the XVR100 show up?
Mine looks like:
pci4: i/o space, memory space enabled
radeonfb0 at pci4 dev 2 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
no data for est. mode 640x480x67
radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x00100000
radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1280x1024 60Hz
radeonfb0: port 1: physical 1280x1024 75Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (fb, vt100 emulation)
drm at radeonfb0 not configured
Martin
Home |
Main Index |
Thread Index |
Old Index