Port-sparc64 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: G'damn raidframe... (was: RaidFrame with unequal size replacements)



On Sat, Aug 01, 2009 at 03:37:05PM -0400, Chris Ross wrote:
> 
> On Aug 1, 2009, at 04:39, Manuel Bouyer wrote:
> >># raidctl -v -a /dev/wd0a raid0
> >># raidctl -F component0 raid0
> >>
> >> After many hours, this completed.  Then, I followed the instruction:
> >>>And finally, reboot the machine one last time before proceeding.
> >>>This is required to migrate Disk0/wd0 from status "used_spare" as
> >>>"Component0" to state "optimal". Refer to notes in the next section
> >>>regarding verification of clean parity after each reboot.
> >>
> >> Unfortunately, when the machine rebooted, I now have a failed
> >>"component1", and no mention of the sd1a that I rebuilt onto as a
> >>spare as per the documentation.
> >>
> >> Anyone have any idea (1) What I did wrong,
> >
> >I think you forgot to
> >raidctl -A yes raid0
> 
>   I don't think that was the problem.  At least, the raid array did  
> configure itself, because I booted off of it.

But you said you changed the name by disabling autoconf. Did you
reenable autoconf after that ?

> 
>   Do I need to execute raidctl -A yes (or in my case, -A root)  
> *after* the reconstruction to spare completes, so that it writes out  
> effectively new information about configuration to the members of the  
> array?  I suppose that makes sense, but it's not in the RAIDframe  
> guide that I was following.

I never needed to do it, but I didn't change the raidframe's name ...

>   When this completes, should I be able to do as I did before, and  
> just reboot?  Or, does there need to be a raidctl -A in there  
> somewhere?  (It's already set to -A auto, but of course that was only  
> when there was one drive, so.  (*shrug*))

If you disable autoconf, you need to reenable it at some point.

-- 
Manuel Bouyer <bouyer%antioche.eu.org@localhost>
     NetBSD: 26 ans d'experience feront toujours la difference
--


Home | Main Index | Thread Index | Old Index