Strangely enough, installation and boot of 4.0 RC1 (did not try
the 3.1 CDROM again) worked without any problem today ...

What puzzles me, is that a 'test-all' from the OpenBoot prompt shows
the following error:

ok test-all
Testing /pci@1f,0/ide@d
Testing /pci@1f,0/usb@a
Testing /pci@1f,0/ethernet@5
Testing /pci@1f,0/ethernet@c
Testing /pci@1f,0/pmu@3
Testing /pci@1f,0/pmu@3/i2c@0,0/i2c-nvram@0,a0
Testing /pci@1f,0/isa@7/serial@0,2e8
Testing /pci@1f,0/isa@7/serial@0,3f8
[Used as Console] 
Testing /pci@1f,0/isa@7/SUNW,lomh@0,8010

   ERROR  : LOM read command mismatch
   SUMMARY: Obs=0x00 Exp=0x55 XOR=0x55 R/W-Mask=0xff Addr=0x7e 
   DEVICE : /pci@1f,0/isa@7/SUNW,lomh@0,8010

   Error: /pci@1f,0/isa@7/SUNW,lomh@0,8010 selftest failed, return code
= 1
ok

karin <karin@visti.de>
=====
On Sat, 2007-09-08 at 23:38 +0200, Martin Husemann wrote:
> On Sat, Sep 08, 2007 at 09:09:43PM +0200, Karin Willers wrote:
> > SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
> > 
> > --- SYSTEM HANGS ---
> 
> This is not a common failure mode.
> Can you break into ddb when it hangs (send a break)?
> 
> Martin
>