On Sat, Dec 17, 2005 at 04:34:54PM +0100, Wouter Schoot wrote:
> rivo nurges wrote:
> > You can get OBP 4.15.7 and 4.13.4 from:
> > http://sunsolve.sun.com/search/document.do?assetkey=urn:cds:docid:1-21-119238-01-1
> 
> Thanks a million, that website is quite hard to find your way on :-)
> Let's see if that solves it, more on this after the weekend.

Downgrading OBP to 4.5.9 fixed lost interrupt issues and keyboard at least
detected.

http://sunsolve.sun.com/search/document.do?assetkey=urn:cds:docid:1-21-111179-04-1

console is keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.13 (GENERIC) #0: Mon Dec  5 03:39:14 UTC 2005
	builds@works.netbsd.org:/home/builds/ab/HEAD/sparc64/200512040000Z-obj/home/builds/ab/HEAD/src/sys/arch/sparc64/compile/GENERIC
total memory = 1024 MB
avail memory = 992 MB
bootpath: /pci@1f,0/network@c,1
mainbus0 (root): SUNW,Sun-Blade-100: hostid 831daf91
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0
pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 10d0000 to 1150000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 12 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
ebus1 at pci0 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus1 addr 0-ffff ipl 42 not configured
power at ebus1 addr 800-82f ipl 32 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
gem0 at pci0 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
gem0: Ethernet address 00:03:ba:1d:af:91, 2KB RX fifo, 2KB TX fifo
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sun Microsystems FireWire controller (Firewire serial bus, interface 0x10, revision 0x01) at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3: Sun Microsystems USB controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci0 dev 3 function 0 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x01)
autri0: interrupting at ivec 23
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, mmap, independent
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppb0 at pci0 dev 5 function 0: Intel S21152BB PCI-PCI Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intergraph product 0x07a0 (VGA display) at pci1 dev 0 function 0 not configured
ppb1 at pci1 dev 2 function 0: Digital Equipment DC21152 PCI-PCI Bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
isp0 at pci2 dev 4 function 0: QLogic 1020 Fast Wide SCSI HBA
isp0: interrupting at ivec 1815
isp0: invalid NVRAM header
scsibus0 at isp0: 16 targets, 8 luns per target
machfb0 at pci0 dev 19 function 0: ATI Technologies Rage XL (rev. 0x27)
machfb0: 16 MB aperture at 0x07000000, 4 KB registers at 0x00426000
memctl: 10a57a3b
ref_freq=29.498MHz
machfb0: 8188 KB SDRAM 114.992 MHz, maximum RAMDAC clock 230 MHz
machfb0: initial resolution 1152x864 at 8 bpp
initializing the DSP
wsdisplay1 at machfb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wsdisplay1: screen 0-3 added (default)
pcons0 at mainbus0
No counter-timer -- using %tick at 502MHz as system clock.
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0005, rev 1.00/1.02, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay1
uhidev1 at uhub0 port 4 configuration 1 interface 0
uhidev1: vendor 0x0430 product 0x0100, rev 1.10/1.05, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0: <ST320011A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd0: no disk label
root on gem0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 10.10.10.204
nfs_boot: my_domain=estpak.ee
nfs_boot: my_addr=10.10.10.169
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=10.10.10.1
root on 10.10.10.204:/export/blade100
root file system type: nfs

-- 
rix
http://www.ripe.net/perl/whois?rix@estpak.ee