Subject: Re: Adaptec 2940UW flashed for Mac on an Ultra5
To: NetBSD Port Sparc64 <port-sparc64@NetBSD.org>
From: Sean Davis <dive-nb@endersgame.net>
List: port-sparc64
Date: 03/11/2005 13:07:53
On Fri, Mar 11, 2005 at 08:09:11AM -0500, Dave McGuire wrote:
> On Mar 11, 2005, at 1:42 AM, George Adkins wrote:
> >>I'm interested in firmware versions of those running either 
> >>AHA2940UW/OF or, if someone has really flashed their AHA2940UW and 
> >>got it working.
> >
> >I have a way to get this working, but it involves a soldering iron, 
> >and I need an image of the 2940UW/OF ROM code.
> >
> >I've been trying for a couple years to get that ROM image, but so far, 
> >no luck...
> >
> >Still looking
> 
>   Hi George, fancy meeting you here. ;)  Would the appropriately-loaded 
> 2940 be found floating around in any particular vendor-specific venues 
> in which we could hunt?

I don't have another machine with a 2940 online at the moment, but here's a
pcictl dump of my 2940UW-OFW (the one that works great in my Ultra5...):

starways# pcictl pci2 dump -d 1
PCI configuration registers:
  Common header:
    0x00: 0x81789004 0x02800007 0x01000000 0x00008000

    Vendor Name: Adaptec (0x9004)
    Device Name: AHA-2940 Ultra (0x8178)
    Command register: 0x0007
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: mass storage (0x01)
    Subclass Name: SCSI (0x00)
    Interface: 0x00
    Revision ID: 0x00
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x80
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000001 0x00002000 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00010000 0x00000000 0x00000000 0x08080100

    Base address register at 0x10
      type: i/o
      base: 0x00000000, not sized
    Base address register at 0x14
      type: 32-bit nonprefetchable memory
      base: 0x00002000, not sized
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00010000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x08
    Minimum Grant: 0x08
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x800015a0 0x800015a0 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000


HTH, and I'll try to get that card into a PC to dump it soon, I just keep
forgetting about it.

- Sean

--
 _
( ) ASCII Ribbon Campaign
 X
/ \ For Plain Text Email