Hello listreaders,

I know Sparc E3000 is not supported, but I tried to boot netBSD 1.6.1
on my E3000 from a CD and trough the net. (The crash occurs at the same place)

Would the SPARC experts on this list please have a look at the startup
log below and give me feedback how big are they seeing the chances to
bring netBSD to the SPARC E3000.


I was successfully trying debian SPARC on this machine. But I would like to 
see netBSD on it.

Thanks
jakob strebel

*****************

boot cdrom
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f  File and args:
NetBSD IEEE 1275 Bootblock
..>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.5
 >> (autobuild@cs20.apochromatic.org, Mon Apr  7 09:50:05 UTC 2003)
devopen: getdisklabel sez no disk label
devopen: search_label sez no disk label
loadfile: reading header
elf64_exec: Booting /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f/netbsd
4557480@0x1000000+5400584@0x1800000+2988024@0x1d26808
symbols @ 0xffb28280 74 start=0x1000000
chain: calling OF_chain(800000, e478, 1000000, fff6da80, 18)
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Kernel size exceeds 4MB
consinit()
setting up stdin
chosen = f002ce50, stdin @ 0x181a878
stdin instance = ffdc8b28
stdin node = f005cc8c
setting up stdout
stdout instance = ffdc8f88
stdout package = f005cc8c
buffer @ 0x2009d90
console is /central@1f,0/fhc@0,f8800000/zs@0,902000:a
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 1.6.1 (INSTALL) #0: Mon Apr  7 10:47:36 UTC 2003

autobuild@cs20.apochromatic.org:/autobuilder/build/netbsd-1-6/sparc64/OBJ/autobuilder/build/netbsd-1-6/src/sys/arch/sparc64/compile/INSTALL
total memory = 512 MB
avail memory = 451 MB
using 3289 buffers containing 26312 KB of memory
bootpath: /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f
mainbus0 (root): SUNW,Ultra-Enterprise
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 248 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 4096K
external (64 b/l)
central at mainbus0 not configured
fhc at mainbus0 not configured
sbus0 at mainbus0 addr 0xffdb6000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTSB: 24f0000 to 24f2000
SUNW,soc at sbus0 slot 13 offset 0x10000 vector 22 ipl 2 not
configured
fhc at mainbus0 not configured
timer0 at mainbus0 addr 0xffd99c00 irq vectors b0 and b1
sbus at mainbus0 addr 0xffd8e000 not configured
timer1 at mainbus0 addr 0xffd7fc00 irq vectors f0 and f1
pcons0 at mainbus0
raidattach
Fatal Reset


@(#) Ultra Enterprise 3.2 Version 26 created 2000/05/09 19:073,0>FATAL
ERROR
3,0>	At time of error: System software was running.
3,0>	Diagnosis: Board 1, software, any system board