On Tue, Sep 09, 2003 at 10:10:22PM +0000, Andrey Petrov wrote:
> I put it as of it's current state into
> ftp://ftp.netbsd.org/pub/NetBSD/misc/petrov/X
> 

I tested the binaries you uploaded, and they work fine. Many
a thanks! Only one problem (not sure if it's me lacking some
config or problem in the binaries):

sys_ioctl: _IOW('t', 92, 4) returned -1: pid=43 comm=ttyflags
sys_ioctl: _IOW('t', 92, 4) returned -1: pid=43 comm=ttyflags

> There is small README there describing what's there. Build should be
> straighforward. 

I'll try later (building it).

Here's a happy dmesg :


console is keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6W (U2FFB) #64: Fri Aug 22 15:08:30 PDT 2003
	and@muppet:/work/16W/sys/arch/sparc64/compile/U2FFB
total memory = 640 MB
avail memory = 585 MB
using 4108 buffers containing 32864 KB of memory
bootpath: /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0
mainbus0 (root): SUNW,Ultra-2
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 399.976 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffc8000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTSB: 3068000 to 306a000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13: CS4231A
audio0 at audiocs0: full duplex
auxio at sbus0 slot 15 offset 0x1900000 not configured
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 809bdd0e
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
kbd0 at zs1 channel 0: baud rate 1200 (console input)
wskbd0 at kbd0 (mux ignored): console keyboard
zstty2 at zs1 channel 1
ms0 at zstty2
wsmouse0 at ms0 (mux ignored)
sc at sbus0 slot 15 offset 0x1300000 not configured
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: FAS366/HME, 40MHz, SCSI ID 7
scsibus0 at esp0: 16 targets, 8 luns per target
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: Sun Happy Meal Ethernet (SUNW,hme)
hme0: Ethernet address 08:00:20:9b:dd:0e
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: DMA rev unknown (0x20000000)
ffb0 at mainbus0 addr 0xfec00000: Creator, model SUNW,501-2634
wsdisplay0 at ffb0 (kbdmux ignored): console (std, sun emulation), using wskbd0
wsdisplay0: screen 1 added (std, sun emulation)
pcons at mainbus0 not configured
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST34371W SUN4.2G, 7462> disk fixed
sd0: 4094 MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sect x 8385121 sectors
sd0: sync (100.00ns offset 15), 16-bit (20.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <FUJITSU, MAB3091S SUN9.0G, 1705> disk fixed
sd1: 8637 MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sect x 17689267 sectors
sd1: sync (100.00ns offset 15), 16-bit (20.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, XM5701TASUN12XCD, 2395> cdrom removable
cd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
root on sd0a dumps on sd0b
root file system type: ffs
sys_ioctl: _IOW('t', 92, 4) returned -1: pid=43 comm=ttyflags
sys_ioctl: _IOW('t', 92, 4) returned -1: pid=43 comm=ttyflags

-Martin