dmesg:
tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: interrupting at ivec 3006
tlp0: Ethernet address 00:03:ba:06:25:3a

/var/run/dmesg.boot:
tlp0: receive process failed to idle: state RUNNING - WAIT
tlp0: receive process failed to idle: state RUNNING - WAIT

ifconfig -m tlp0":
> ifconfig -m tlp0
tlp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:03:ba:06:25:3a
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        supported Ethernet media:
                media none
                media 10baseT
                media 10baseT mediaopt full-duplex
                media 100baseTX
                media 100baseTX mediaopt full-duplex
                media autoselect
        inet 192.168.23.143 netmask 0xffffff80 broadcast 192.168.23.255
        inet6 fe80::203:baff:fe06:253a%tlp0 prefixlen 64 scopeid 0x1

Thanks

M.Honda


From: Martin Husemann <martin@duskware.de>
Subject: Re: Netatalk on Netra X1
Date: Thu, 27 Feb 2003 09:24:46 +0100

> Could you please tell us how the system detected the tlp* interface this is
> happening on? A few lines of dmesg output (or from /var/run/dmesg.boot)
> before and after the tlp0: .... lines would do (and any following MII/phy
> related lines).
> 
> What does "ifconfig -m tlp0" say?
> 
> Thanks
> 
> Martin
> P.S.: http://www.netbsd.org/releng/releng-1.6.html will tell you that 1.6.1
> is pretty close now.
>