Jason R Thorpe writes:
>Now that my CP1500 interrupt problems are fixed, chances are that
>the kernel will now "Just Work" on a Netra T1.

Here's the dmesg output on a Netra t1 105 using a kernel Jason 
sent me.  Shouldn't there be two hme devices?  There are two 
PHYs, at least...

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5X (GENERIC) #7: Fri Sep 14 12:18:19 PDT 2001
    thorpej@dr-evil:/u1/netbsd/src/sys/arch/sparc64/compile/GENERIC
total memory = 128 MB
avail memory = 108 MB
using 832 buffers containing 6656 KB of memory
bootpath: /pci@1f,0/pci@1,1/network@1,1
mainbus0 (root): SUNW,UltraSPARC-IIi-cEngine
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 360.031 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 2048K external (64 b/l
) 
psycho0 at mainbus0 addr 0xfffc0000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
intr_establish: intr reused 7c0
DVMA map: c0000000 to e0000000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003,
 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, working fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, working fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not con
figured
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80c21532
flashprom at ebus0 addr 0-fffff not configured
watchdog at ebus0 addr 200000-20003f ipl 4 not configured
display7seg at ebus0 addr 200040-200040 not configured
beeper at ebus0 addr 722000-722003 not configured
flashprom at ebus0 addr 400000-5fffff not configured
flashprom at ebus0 addr 800000-9fffff not configured
i2c at ebus0 addr 600000-600003 ipl 40 not configured
i2c at ebus0 addr 100000-100003 ipl 27 not configured
SUNW,lom at ebus0 addr 400000-400063 not configured
hme0 at pci1 dev 1 function 1: address 08:00:20:c2:15:32
ukphy0 at hme0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: using ivec 3021 for interrupt
siop0 at pci1 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at ivec 20
scsibus0 at siop0: 16 targets, 8 luns per target
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 1 function 0: Digital Equipment DECchip 21150 PCI-PCI Bridge (r
ev. 0x04)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
pciide0 at pci3 dev 14 function 0: CMD Technology PCI0646 (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
intr_establish: intr reused 7c0
pciide0: using ivec 1800 for native-PCI interrupt
pciide0: secondary channel configured to native-PCI mode
pciide0: disabling secondary channel (no drives)
pcons at mainbus0 not configured
No counter-timer -- using %tick at 360MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
Kernelized RAIDframe activated
root on hme0