On Thu, 24 Aug 2000, Andy Doran wrote:

> -- Netra T1:
> 
> chain: calling OF_chain(800000, ef18, f1000000, fffa3a80, 18)
> [ using 368424 bytes of netbsd ELF symbol table ]

....

> ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> hme0: using vector 33 for interrupt
> siop0 at pci2 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi)
> siop0: using on-board RAM
> siop0: interrupting at vector 32
> scsibus0 at siop0: 16 targets, 8 luns per target

Hm.  siop.

> Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci2 dev 3 function 0 not configured
> hme1 at pci2 dev 3 function 1: address 08:00:20:c2:84:ce
> ukphy2 at hme1 phy 0: Generic IEEE 802.3u media interface
> ukphy2: OUI 0x00601d, model 0x000c, rev. 1
> ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> hme1: using vector 26 for interrupt
> pcons0 at mainbus0
> No counter-timer -- using %tick at 439MHz as system clock.
> Using tick -- intr in 4399989 cycles...done.
> scsibus0: waiting 2 seconds for devices to settle...
> sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAE3091L SUN9.0G, 0706> SCSI2 0/direct fixed
> siop0: target 0 using 16bit transfers
> siop0: target 0 now synchronous at 20.0Mhz, offset 16
> sd0: 8637 MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sect x 17689267 sectors

Hm.  useable disks.

> raidattach: Asked for 4 units
> Kernelized RAIDframe activated
> root on hme0
> mountroot: trying msdos...
> mountroot: trying cd9660...
> mountroot: trying lfs...
> mountroot: trying nfs...
> nfs_boot: trying RARP (and RPC/bootparam)
> revarp failed, error=51
> mountroot: trying ffs...
> no file system for hme0
> cannot mount root, error = 79
> root device (default hme0): 

I'd recommend putting a miniroot on your disk and using ifconfig to test
out the HME drivers and see if you get some useful data that way.


Eduardo Horvath