I'm having trouble booting the sparc64 1.6 miniroot on a Sun Fire V100.
Is there any chance this should work, or am I trying the impossible?

# swap -l
swapfile             dev  swaplo blocks   free
/dev/dsk/c0t2d0s4   136,4      16 2048144 2048144
# swap -d /dev/dsk/c0t2d0s4
/dev/dsk/c0t2d0s4 was dump device --
invoking dumpadm(1M) -d swap to select new dump device
dumpadm: no swap devices are available
# swap -l
No swap devices configured
# dd if=miniroot.fs of=/dev/rdsk/c0t2d0s4 bs=4k conv=sync
1792+0 records in
1792+0 records out
# halt
Sep 15 19:13:59 in.ndpd[119]: terminated
Sep 15 19:13:59 gambit halt: halted by root
Sep 15 19:13:59 gambit syslogd: going down on signal 15
syncing file systems... done
Program terminated
ok boot disk:d netbsd -s
Res
LOM event: +4h46m51s host reset
etting ... 


Sun Fire V100 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #51700933.
Ethernet address 0:3:ba:14:e4:c5, Host ID: 8314e4c5.



Executing last command: boot disk:d netbsd -s                         
Boot device: /pci@1f,0/ide@d/disk@2,0:d  File and args: netbsd -s
Fast Data Access MMU Miss
ok 


-- 
								Greg A. Woods

+1 416 218-0098;            <g.a.woods@ieee.org>;           <woods@robohack.ca>
Planix, Inc. <woods@planix.com>; VE3TCP; Secrets of the Weird <woods@weird.com>